Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- IPAC 6390
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial. For professional use only. Lubricant.
Uses advised against
No additional information available
Manufacturers & Suppliers
IPAC, Inc.
manufacturer
7600 Dublin Blvd. Suite 240 94568 Dublin, CA - USA
925-556-5530
Emergency Contacts
Emergency Contact
(800) 720-7949
7:00 AM – 5:00 PM - PST
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Distillates (petroleum), hydrotreated heavy paraffinic EC: 265-157-1 | 64742-54-7 | 15% | Yes |
| Phosphorodithioic acid, O,O-di-C1-14-alkyl esters, zinc salts EC: 272-028-3 | 68649-42-3 | 15% | Yes |
| Residual Oils (petroleum), Solvent Dewaxed EC: 265-166-0 | 64742-62-7 | 10% | Yes |
| Diphenylamine EC: 204-539-4 | 122-39-4 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled and if breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing.
Symptoms: Inhalation may cause: irritation, coughing, shortness of breath.
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.
Symptoms: No significant signs or symptoms indicative of any health hazard are expected to occur as a result of skin contact.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Symptoms: Causes serious eye irritation.
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
Symptoms: No significant signs or symptoms indicative of any adverse health hazard are expected to occur as a result of ingestion.
Immediate Medical Attention
All treatments should be based on observed signs and symptoms of distress in the patient.
Medical Treatment
All treatments should be based on observed signs and symptoms of distress in the patient.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Do not use a heavy water stream.
No specific fire or explosion hazard.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection. EN 469.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate unnecessary personnel. Ventilate area.
Contains no substances known to be hazardous to the environment. Avoid release to the environment.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour.
Keep only in the original container in a cool well ventilated place. Keep container closed when not in use.
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Wash hands thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Avoid splashing.
Wear protective gloves. nitrile rubber gloves. EN 374.
Chemical goggles or safety glasses. EN 166.
Where exposure through inhalation may occur from use, respiratory protection equipment is recommended. Use an approved respirator equipped with oil/mist cartridges. EN 12083.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at ambient temperature and under normal conditions of use.
No dangerous reactions known.
Hazardous polymerization will not occur.
Keep away from sources of ignition.
strong acids. Strong bases.
Carbon dioxide. Carbon monoxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
Not established.
12.2. Persistence and degradability
Readily biodegradable. Product persists.
12.2. Persistence and degradability
Not established.
12.3. Bioaccumulative potential
Not established.
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
Not established.
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substance/mixture does not meet the PBT or vPvB criteria of REACH, annex XIII.
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in a safe manner in accordance with local/national regulations.
Dispose in a safe manner in accordance with local/national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for IPAC 6390?
The signal word is warning.
What is the physical form of IPAC 6390?
IPAC 6390 is a liquid with colourless. color. It has characteristic. odor.
What is IPAC 6390 used for?
Industrial. For professional use only. Lubricant.
What are the hazard statements for IPAC 6390?
This substance has 1 hazard statement:
- H319: Causes serious eye irritation