Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- IPAC 745
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Additive
Uses advised against
No additional information available
Manufacturers & Suppliers
IPAC, Inc.
manufacturer
7600 Dublin Blvd. Suite 240, Suite 240, 94568 Dublin, CA - USA
925-556-5530
Emergency Contacts
Chemtrec
1-800-424-9300
Chemtrec
1-703-527-3887
National Poisons Information Service (Birmingham Centre) City Hospital
0344 892 0111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phosphorodithioic acid, mixed O,O-bis(2-ethylhexyl and iso-Bu) esters, zinc salts EC: 270-478-5 | 68442-22-8 | 75 - 85% | Yes |
| Distillates (petroleum), hydrotreated heavy paraffinic (DMSO < 3%) EC: 265-157-1 | 64742-54-7 | 5 - 10% | No |
| 2,5-Furandione, 3-(dodecenyl) dihydro- EC: 246-917-1 | 25377-73-5 | 1 - 5% | Yes |
| Zinc alkylnaphthalenesulfonate EC: 248-778-2 | 28016-00-4 | 1 - 5% | Yes |
| Naphtha (petroleum), hydrotreated heavy (benzene < 0.1%) EC: 265-150-3 | 64742-48-9 | 0.5 - 1% | Yes |
| 1,2,4-trimethylbenzene EC: 202-436-9 | 95-63-6 | 0.1% | Yes |
| Xylene EC: 215-535-7 | 1330-20-7 | 0.1% | Yes |
| 1,2,3-Trimethylbenzene EC: 208-394-8 | 526-73-8 | 0.1% | Yes |
| mesitylene; 1,3,5-trimethylbenzene EC: 203-604-4 | 108-67-8 | 0.1% | Yes |
| ethylbenzene EC: 202-849-4 | 100-41-4 | 0.1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled and if breathing is difficult, remove victim to fresh air and keep at rest in a position comfortable for breathing. Allow the victim to rest.
Wash skin thoroughly with mild soap and water. Wash contaminated clothing before reuse. If skin irritation occurs: Get medical advice/attention.
Symptoms: Causes skin irritation.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.
Symptoms: Causes serious eye damage.
Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention.
Immediate Medical Attention
Immediately call a POISON CENTER/doctor. If skin irritation occurs: Get medical advice/attention. Obtain emergency medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Do not use a heavy water stream.
Burning produces irritating, toxic and noxious fumes.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection. Wear a self contained breathing apparatus. Wear fire/flame resistant/retardant clothing. EN469.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
General measures: Avoid all eye and skin contact and do not breathe vapour and mist. Ensure adequate ventilation. Safety showers and eye wash stations should be located near areas with splash hazards. Stop leak without risks if possible. Use personal protective equipment as required. For non-emergency personnel: Evacuate unnecessary personnel. For emergency responders: Ventilate area.
Avoid release to the environment.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. Avoid all eye and skin contact and do not breathe vapour and mist.
Keep only in the original container in a cool well ventilated place. Keep container closed when not in use.
Do not eat, drink or smoke when using this product. Take off immediately all contaminated clothing and wash it before reuse. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Avoid creating mist or spray. Avoid splashing. Emergency eye wash fountains and safety showers should be available in the immediate vicinity of any potential exposure. Ensure good ventilation of the work station. Provide local exhaust or general room ventilation.
Wear suitable gloves resistant to chemical penetration. nitrile rubber gloves. EN374
tightly fitting safety goggles. Use splash goggles when eye contact due to splashing is possible. Face shield. EN166
In case of inadequate ventilation wear respiratory protection. Use an approved respirator equipped with oil/mist cartridges. EN 136/140
Wear suitable protective clothing
Prevent leakage or spillage. Prevent contaminated water run-off.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No dangerous reactions known.
Hazardous polymerization will not occur.
Direct sunlight. Extremely high or low temperatures.
Strong acids. Strong bases. Strong oxidizers.
Carbon monoxide. Carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The substance is classified as toxic to aquatic life with long lasting effects.
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2. Persistence and degradability
May cause long-term adverse effects in the environment.
Persistence and degradability
Persistence and degradability
Not established.
12.3. Bioaccumulative potential
Not established.
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
Not expected to bioaccumulate.
Bioaccumulative potential
Not established.
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
12.4. Mobility in soil
Not established.
12.5. Results of PBT and vPvB assessment
IPAC 745 is not yet assessed for PBT/vPvB. The components Distillates (petroleum), hydrotreated heavy paraffinic (DMSO < 3%) and Phosphorodithioic acid, mixed O,O-bis(2-ethylhexyl and iso-Bu) esters, zinc salts do not meet the PBT or vPvB criteria of REACH regulation, annex XIII.
12.6. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in a safe manner in accordance with local/national regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3082
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Phosphorodithioic acid, mixed O,O-bis(2-ethylhexyl and iso-Bu) esters, zinc salts)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for IPAC 745?
The signal word is danger.
What is the physical form of IPAC 745?
IPAC 745 is a liquid with no data available. color. It has no data available. odor.
What is the solubility of IPAC 745?
No data available
What is IPAC 745 used for?
Additive
What are the hazard statements for IPAC 745?
This substance has 3 hazard statements:
- H315: Causes skin irritation.
- H318: Causes serious eye damage.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of IPAC 745?
The melting point is No data available and the boiling point is No data available.