HITEC 66125 - bulk

Move to fresh air. If symptoms persist, call a physician.

Do NOT use solvents or thinners. Wash off with soap and water. If symptoms persist, call a physician.

Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician. Keep eye wide open while rinsing. Remove contact lenses.

Do NOT induce vomiting. If symptoms persist, call a physician.

Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide. Product is compatible with standard fire-fighting agents.

High volume water jet

Fire will produce dense black smoke containing hazardous combustion products (see section 10). Vapours may form explosive mixtures with air.

Use water spray to cool unopened containers.

Ensure adequate ventilation. Use personal protective equipment. Avoid contact with skin, eyes and clothing. Remove all sources of ignition. Avoid inhalation of vapour or mist. Contaminated surfaces will be extremely slippery. Treat recovered material as described in the section "Disposal considerations".

Should not be released into the environment.

Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal.

Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)

Wear personal protective equipment. Avoid formation of aerosol. Keep away from heat and sources of ignition. Do not breathe vapours, aerosols.

Keep containers tightly closed in a dry, cool and well-ventilated place.

Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling the product. Regular cleaning of equipment, work area and clothing. Keep away from food and drink. General industrial hygiene practice. When using do not eat, drink or smoke.

Take measures to prevent the build up of electrostatic charge. Keep away from heat and sources of ignition. Normal measures for preventive fire protection.

Provide sufficient air exchange and/or exhaust in work rooms. Handle product only in closed system or provide appropriate exhaust ventilation at machinery.

Material : Protective gloves Directive : Equipment should conform to EN 374 Remarks : The suitability for a specific workplace should be discussed with the producers of the protective gloves. The choice of an appropriate glove does not only depend on its material but also on other quality features and is different from one producer to the other. The exact break through time can be obtained from the protective glove producer and this has to be observed. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. Request information on glove permeation properties from the glove supplier. Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work.

Safety glasses with side-shields Equipment should conform to EN 166

In the case of vapour formation use a respirator with an approved filter.

Safety shoes Wear suitable protective clothing.

The product is chemically stable.

No decomposition if stored and applied as directed.

Burning produces noxious and toxic fumes. Vapours may form explosive mixture with air.

Keep away from heat and sources of ignition.

Oxidizing agents

Carbon monoxide, carbon dioxide and unburned hydrocarbons (smoke). Nitrogen oxides (NOx)

Dispose of in accordance with the European Directives on waste and hazardous waste. In accordance with local and national regulations.

Dispose of in accordance with the European Directives on waste and hazardous waste. In accordance with local and national regulations.