YUBASE 8

Inhalation at ambient temperature is unlikely because of the low vapour pressure of the substance. Move to well-ventilated area. Check vital signs regularly and act accordingly.

Symptoms: May cause: nasal irritation, respiratory tract irritation.

Remove contaminated, saturated clothing immediately. Wash area with soap and water for 10 to 15 minutes or rinse the skin with 10% dioctyl sulfosuccinate (DS) if available.

Symptoms: Causes mild skin irritation.

Remove contact lenses. Irrigate exposed eyes with 0.9% normal saline if available or water for at least 15 minutes. Irrigate before and after removing the lenses to prevent a carry-over of the substances to the shielded area of the lens.

Symptoms: Mild eye irritation.

IF SWALLOWED: Immediately call a POISON CENTRE or doctor/ physician. Do NOT induce vomiting. If vomiting does occur, have victim lean forward to reduce risk of aspiration.

Symptoms: Incidental oral exposure; aspiration hazard; may be fatal if it enters the airways after swallowing.

Foam (Specifically trained personnel only)- Water fog (Specifically trained personnel only)- Dry chemical powder- Carbon dioxide- Other inert gases (subject to regulations)- Sand or earth.

Do not use direct water jets on the burning product; they could cause splattering and spread the fire. Simultaneous use of foam and water on the same surface is to be avoided as water destroys the foam.

Stop or contain leak at the source if safe to do so. Avoid direct contact with released material. Stay upwind. In case of large spillages, alert occupants in downwind areas. Keep non-involved personnel away from the area of spillage. Alert emergency personnel. Eliminate all ignition sources if safe to do so (e.g. electricity, sparks, fires, flares).

in case of small spillages in closed waters (i.e. ports), contain product with floating barriers or other equipment. Collect spilled product by absorbing with specific floating absorbents.

Large spillages may be cautiously covered with foam, if available, to limit vapour cloud formation. Do not use direct jets. Large spillages in open waters should be contained with floating barriers or other mechanical means and recovered, only if this is strictly necessary and if fire/explosion risks can be adequately prevented.

prevent product from entering sewers, rivers, waterways or other bodies of water.

Absorb spilled product with suitable non-combustible materials. Collect free product with suitable means. Transfer collected product and other contaminated materials to suitable containers for recovery or safe disposal.

Materials: suitable non-combustible materials

Obtain special instructions before use. Ensure that all relevant regulations regarding handling and storage facilities of combustible products are followed. It is recommended to keep away from sparks/open flames/hot surfaces. – No smoking. Use and store only outdoors or in a well-ventilated area. Avoid contact with the product. Avoid release to the environment. Take precautionary measures against static electricity. Avoid splash filling of bulk volumes when handling hot liquid product. Avoid contact with skin. Avoid breathing fume/mist. (If R65 / H304 is applicable): Do not ingest. Prevent the risk of slipping. Use personal protective equipment as required.

Use and store only outdoors or in a well-ventilated area.

Ensure that proper housekeeping measures are in place. Contaminated materials should not be allowed to accumulate in the workplaces and should never be kept inside the pockets. Keep away from food and beverages. Do not eat, drink or smoke when using this product. Wash the hands thoroughly after handling. Change contaminated clothes at the end of working shift.

Keep away from sparks/open flames/hot surfaces. – No smoking. Take precautionary measures against static electricity.

Ensure that there is a suitable ventilation system.

Protective gloves

Wear security glasses which protect from splashes. Face shield

In case of inadequate ventilation wear respiratory protection. Do not breathe gas, vapours

Long sleeved protective clothing

Avoid release to the environment. Prevent further leakage or spillage if safe to do so.

Stable under normal conditions.

The product is stable under normal conditions.

Hazardous polymerization will not occur

No flames, no sparks. Eliminate all sources of ignition.

Strong acids. Strong oxidizing agents.

No hazardous decomposition products known at room temperature.

Must follow special treatment according to local regulation. Avoid release to the environment. Assure that emissions are compliant with all applicable air pollution control regulations.

Refer to manufacturer/supplier for information on recovery/recycling.