Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PU-SYSTEM G8-SUPER
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Polyurethane lacquer
Uses advised against
Not suitable for use in homeworker (DIY) applications.
Manufacturers & Suppliers
Vosschemie GmbH
manufacturer
Esinger Steinweg 50, D-25436 Uetersen
+49 (0)4122 717 0
Emergency Contacts
Giftinformationszentrum (GIZ)-Nord
+49 (0)551 19240
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| aliphatic polyisocyanate | 67892-85-7 | 25 - 50% | Yes |
| xylene, mixture of isomers EC: 215-535-7 | 1330-20-7 | 25 - 50% | Yes |
| Solvent naphtha (petroleum), light arom. EC: 265-199-0 | 64742-95-6 | 10 - 20% | Yes |
| ethylbenzene EC: 202-849-4 | 100-41-4 | 3 - 10% | Yes |
| Hydrocarbons, C9, aromatics EC: 918-668-5 | --- | 3 - 10% | Yes |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 3 - 10% | Yes |
| hexamethylene-di-isocyanate EC: 212-485-8 | 822-06-0 | 0.1 - 0.3% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. In case of unconsciousness place patient stably in side position for transportation. Seek medical treatment in case of complaints.
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower. Immediately wash with water and soap and rinse thoroughly. If skin irritation occurs: Get medical advice/attention. Use skin protection cream for skin protection.
Symptoms: skin irritation
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a doctor immediately.
Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
Call a doctor immediately (eyes), call for medical help immediately (swallowing).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Water with full jet
Violent reaction with water at higher temperatures.
Cool endangered receptacles with water spray.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit. Do not inhale explosion gases or combustion gases.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away. Avoid contact with the eyes and skin. Ensure adequate ventilation. Do not inhale gases / fumes / aerosols.
Avoid release to the environment.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep receptacles tightly sealed. Avoid contact with the eyes and skin. Do not inhale gases / fumes / aerosols. Use respiratory protective device against the effects of fumes/dust/aerosol.
Store only in the original receptacle. Store in cool, dry conditions in well sealed receptacles. Store receptacle in a well ventilated area. Protect from heat and direct sunlight.
Keep away from foodstuffs, beverages and feed.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges. Ground/bond container and receiving equipment.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Check the permeability prior to each anewed use of the glove. Preventive skin protection by use of skin-protecting agents is recommended. Material of gloves: DIN EN 374. Synthetic rubber gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Adhere to the workplace limit values and / or other threshold values. Use respiratory protective device against the effects of fumes/dust/aerosol. In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device. Filter A/P2
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used and stored according to specifications.
No decomposition if used according to specifications.
Fumes can combine with air to form an explosive mixture. Reacts with numerous chemical compounds, especially those with mobile hydrogen atoms. Reacts with alcohols, amines, aqueous acids and alkalis. Reacts with water. Do not seal receptacle gas tight. Danger of bursting.
Do not seal receptacle gas tight.
numerous chemical compounds, especially those with mobile hydrogen atoms, alcohols, amines, aqueous acids, alkalis, water
Formation of toxic gases is possible during heating or in case of fire.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1993
- Shipping Name
- FLAMMABLE LIQUID, N.O.S. (XYLENES, Solvent naphtha (petroleum), light arom.)
- Transport Class
- 3
- Packing Group
- III
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PU-SYSTEM G8-SUPER?
The signal word is danger.
What is the physical form of PU-SYSTEM G8-SUPER?
PU-SYSTEM G8-SUPER is a liquid with yellowish color. It has like aromates odor.
What is PU-SYSTEM G8-SUPER used for?
Polyurethane lacquer
What are the hazard statements for PU-SYSTEM G8-SUPER?
This substance has 9 hazard statements:
- H226: Flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H317: May cause an allergic skin reaction.
- H319: Causes serious eye irritation.
- H332: Harmful if inhaled.
- H335: May cause respiratory irritation. May cause drowsiness or dizziness.
- H373: May cause damage to organs through prolonged or repeated exposure.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of PU-SYSTEM G8-SUPER?
The melting point is Undetermined. and the boiling point is 137 °C.