Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 5% Methanol Solution
- Chemical Name
- Methanol
Regulatory Identifiers
- CAS Number
- 67-56-1 Check regulations →
Identified Uses
Industrial use
Manufacturers & Suppliers
Solvakem Belgium
distributor
Hundelgemsesteenweg 310, 9820 Merelbeke-Melle, Belgium
+32 (0) 9 380 15 72
Emergency Contacts
Emergency Contact
112
Emergency Contact
+32 (0) 70 245 245
Emergency Contact
+32 (0)2 264 96 30
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
If necessary, move affected person to fresh air.
Wash skin with soap and water. Remove contaminated clothing and wash before reuse.
Symptoms: May cause irritation, redness and pain.
Remove contact lenses. Flush eyes (open) with plenty of water for several minutes. If irritation continues, contact a doctor.
Symptoms: May cause irritation with burning and stinging with possible damage to the cornea and conjunctiva.
Rinse mouth and immediately drink 200-300 ml of water or milk. Do not induce vomiting unless instructed to do so by a physician. Get medical attention, especially if large amounts were ingested.
Immediate Medical Attention
Get medical attention, especially if large amounts were ingested.
Medical Treatment
Not expected to require special treatment
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, dry chemical, foam or carbon dioxide.
Water with full jet.
Slight fire hazard when subject to high heat, containers may explode in fire.
Water spray may be used to keep fire-exposed containers cool.
Firefighter Protection
Wear self-contained breathing apparatus and chemical-protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Absorb with inert material (vermiculite, sand). Ventilate, if necessary, site of spillage well to evaporate remaining liquid and dispel vapor. Always comply with local regulations.
Pump off product.
Do not flush to sewer.
Collect waste in suitable containers, which can be labeled and sealed.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store locked up. As with all chemicals, wash hands thoroughly after handling. Avoid contact with eyes and skin.
Protect from freezing and physical damage.
wash hands thoroughly after handling
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limit.
Wear chemical resistant gloves. Option: Nitrile gloves: ≥120 min. Thickness: ≥0.11 mm.
Safety glasses or goggles.
If engineering controls do not maintain airborne concentrations below recommended exposure limits, an approved atmosphere supplied respirator must be worn.
Wear protective gloves and eye protection. Chemical resistant gloves.
No special precautions are necessary.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of use and storage.
Stable under conditions of normal use and storage.
No data
Heat, open flame, oxidizers, alkali and alkaline earth metals.
Strong oxidizing agents such as sulfuric acid, nitrates and perchlorates. Can attach some plastics and rubber. May react with aluminium to form hydrogen gas.
Thermal decomposition may generate carbon dioxide, carbon monoxide and formaldehyde.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability:
12.3 Bioaccumulative potential:
12.4 Mobility in soil:
12.5 Other adverse effects:
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Contents must be disposed of in an approved waste disposal plant
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1993
- Shipping Name
- Flammable liquids N.O.S.
- Transport Class
- 3 (6.1)
- Packing Group
- I
Provisions for dangerous goods (ADR) should be complied within the premises.
Provisions for dangerous goods (ADR) should be complied within the premises.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Sources: Current ADR regulations 2024. Reporting of Injuries, Diseases and Dangerous Occurrences Regulations 2013. Regulation (EU) 2016/425 of 9 March 2016 on personal protective equipment. EC regulation 1907/2006 (REACH) Directive 2000/532/EC. Seveso directive: 96/82/EC. EC regulation No 2020/878. CLP regulation No 1272/2008. REACH regulation 1907/2006. GB CLP.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 5% Methanol Solution?
The signal word is danger.
What is the physical form of 5% Methanol Solution?
5% Methanol Solution is a liquid with transparent color. It has slight alcohol odor.
What is the solubility of 5% Methanol Solution?
Miscible
What is 5% Methanol Solution used for?
Industrial use
What are the hazard statements for 5% Methanol Solution?
This substance has 3 hazard statements:
- H302: Harmful if swallowed
- H332: Harmful if inhaled
- H371: May cause damage to organs