PXL 5055

Remove person to fresh air and keep comfortable for breathing. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Not expected to present a significant inhalation hazard under anticipated conditions of normal use.

Take off contaminated clothing. Gently wash with plenty of soap and water. In case of doubt or persistent symptoms, consult always a physician.

Symptoms: Not expected to present a significant skin hazard under anticipated conditions of normal use.

Rinse immediately carefully and thoroughly with eye-bath or water. Remove contact lenses, if present and easy to do. Continue rinsing. Get immediate medical advice/attention.

Symptoms: Causes serious eye damage. The following symptoms may occur: Pain, Redness, Itching, Blurred vision, Tears.

Rinse mouth thoroughly with water. Get medical advice/attention.

Symptoms: May cause gastrointestinal irritation, nausea, vomiting and diarrhoea.

carbon dioxide (CO2), powder, alcohol-resistant foam, water spray.

Strong water jet.

Not flammable. Heating causes rise in pressure with risk of bursting.

Evacuate area. Use water spray or fog for cooling exposed containers. Contain the extinguishing fluids by bunding. Prevent fire fighting water from entering the environment.

Evacuate unnecessary personnel. Keep upwind. Provide adequate ventilation. Wear recommended personal protective equipment. Do not breathe vapours. Avoid contact with skin, eyes and clothing. Ensure procedures and training for emergency decontamination and disposal are in place.

Small quantities of liquid spill: take up in non-combustible absorbent material and shovel into container for disposal.

Recover large spills by pumping (use an explosion proof or hand pump). Place in a suitable container for disposal in accordance with the waste regulations (see Section 13).

Do not allow to enter into surface water or drains.

Small quantities of liquid spill: take up in non-combustible absorbent material and shovel into container for disposal. Recover large spills by pumping (use an explosion proof or hand pump). Place in a suitable container for disposal in accordance with the waste regulations (see Section 13).

Materials: non-combustible absorbent material

Provide adequate ventilation. Use personal protective equipment as required. Concerning personal protective equipment to use, see section 8. Do not breathe vapours. Avoid contact with skin, eyes and clothing. Take any precaution to avoid mixing with Incompatible materials, Refer to Section 10 on Incompatible Materials. Ensure proper process control to avoid excess waste discharge (temperature, concentration, pH, time). Avoid release to the environment. Obtain special instructions before use. Do not handle until all safety precautions have been read and understood.

Store in a dry, cool and well-ventilated place. Do not store near or with any of the incompatible materials listed in section 10. Bund storage facilities to prevent soil and water pollution in the event of spillage.

Keep good industrial hygiene. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Do not eat, drink or smoke when using this product. Keep away from food, drink and animal feedingstuffs. Remove contaminated clothes. Separate working clothes from town clothes. Launder separately. Wash contaminated clothing before reuse.

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.

Provide adequate ventilation. Organisational measures to prevent /limit releases, dispersion and exposure. Safe handling: see section 7.

Wear chemically resistant gloves (tested to EN374). Breakthrough time: refer to the recommendations of the supplier. Suitable material: VITON gloves. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances.

Use suitable eye protection. (EN166): goggles. face shield

In case of insufficient ventilation, wear suitable respiratory equipment. Half-face mask (EN 140). Full face mask (EN 136). Filter type: ABEK+P. The filter class must be suitable for the maximum contaminant concentration (gas/vapour/aerosol/particulates) that may arise when handling the product. If the concentration is exceeded, self-contained breathing apparatus must be used. (EN 137)

Wear suitable protective clothing.

Avoid release to the environment. Comply with applicable Community environmental protection legislation.

The product is stable under storage at normal ambient temperatures.

Stable at ambient temperature and under normal conditions of use. Reference to other sections: 10.5.

No dangerous reactions known under normal conditions of use. Hazardous polymerisation does not occur.

Keep away from sources of heat (e.g. hot surfaces), sparks and open flames.

Strong oxidizing agents. Strong acids.

Does not decompose when used for intended uses. Burning produces noxious and toxic fumes. Carbon oxides.

Recycling is preferred to disposal or incineration. If recycling is not possible, eliminate in accordance with local valid waste disposal regulations.

Dispose of empty containers and wastes safely. Dispose of contaminated materials in accordance with current regulations.