PXL 5988

Remove the person affected from the exposure area and provide with fresh air. Seek medical attention if the symptoms get worse or persist.

Remove contaminated clothes and shoes, rinse the skin or if necessary shower the affected person thoroughly with cold water and neutral soap. In case of serious reaction consult a doctor.

Rinse eyes thoroughly with water for at least 15 minutes. If the injured person uses contact lenses, these should be removed unless they are stuck to the eyes, in which case removal could cause further damage. In all cases, after cleaning, a doctor should be consulted as quickly as possible with the SDS for the product.

Do not induce vomiting, but if it does happen keep the head down to avoid aspiration. Keep the person affected at rest. Rinse out the mouth and throat, as they may have been affected during ingestion.

If possible use polyvalent powder fire extinguishers (ABC powder), alternatively use foam or carbon dioxide extinguishers (CO₂).

IT IS RECOMMENDED NOT to use full jet water as an extinguishing agent.

As a result of combustion or thermal decomposition reactive sub-products are created that can become highly toxic and, consequently, can present a serious health risk.

Act in accordance with the Internal Emergency Plan and the Information Sheets on actions to take after an accident or other emergencies. Eliminate all sources of ignition.

Isolate leaks provided that there is no additional risk for the people performing this task. Evacuate the area and keep out those who do not have protection.

Contain spillage using barriers or similar equipment. Use suitable absorbents for collection and treat the waste in accordance with current regulations.

If possible, contain spillage in open water using barriers or similar equipment. If this is not possible, try to control its spread and collect the product with suitable mechanical means. Always consult experts before using dispersants and make sure you have the necessary approvals if they are to be used. Treat the waste according to current regulations.

Avoid at all cost any type of spillage into an aqueous medium.

Contain the product absorbed appropriately in hermetically sealed containers.

Materials: sand or inert absorbent

Comply with the current legislation concerning the prevention of industrial risks with regards manually handling weights. Maintain order, cleanliness and dispose of using safe methods (section 6).

Avoid sources of heat, radiation, static electricity and contact with food.

Do not eat or drink during the process, washing hands afterwards with suitable cleaning products.

Product is non-flammable under normal conditions of storage, handling and use. It is recommended to transfer at slow speeds to avoid the generation of electrostatic charges that can affect flammable products.

Chemical protective gloves (Material: Nitrile, Breakthrough time: > 60 min, Thickness: 0.1 mm), EN ISO 21420:2020. Replace the gloves at any sign of deterioration.

Panoramic glasses against splash/projections. EN 166:2002, EN ISO 4007:2018. Clean daily and disinfect periodically according to the manufacturer´s instructions. Use if there is a risk of splashing.

If the working conditions and/or safety measures adopted do not allow keeping the airborne concentration of the product below the exposure limits (if any) or at acceptable levels (if no exposure limits exist), suitable respiratory protection equipment chosen by a qualified professional should be used.

Work clothing. For periods of prolonged exposure to the product for professional/industrial users CE III is recommended, in accordance with the regulations in EN ISO 6529:2013, EN ISO 6530:2005, EN ISO 13688:2013, EN 464:1994. Replace before any evidence of deterioration. Anti-slip work shoes, EN ISO 20347:2022. For periods of prolonged exposure to the product for professional/industrial users CE III is recommended, in accordance with the regulations in EN ISO 20345:2022 y EN 13832-1:2019. Replace before any evidence of deterioration.

To comply with environmental protection regulations, it is recommended to prevent any spillage of the product and its container.

Chemically stable under the indicated conditions of storage, handling and use.

No hazardous reactions are expected because the product is stable under recommended storage conditions.

Under the specified conditions, hazardous reactions that lead to excessive temperatures or pressure are not expected.

Shock and friction: Not applicable; Contact with air: Not applicable; Increase in temperature: Not applicable; Sunlight: Not applicable; Humidity: Not applicable

Acids: Avoid strong acids; Oxidising materials: Precaution; Others: Avoid alkalis or strong bases

See sub section 10.3, 10.4 and 10.5 to find out the specific decomposition products. Depending on the decomposition conditions, complex mixtures of chemical substances can be released: carbon dioxide (CO₂), carbon monoxide and other organic compounds.

Consult the authorized waste service manager on the assessment and disposal operations in accordance with Annex 1 and Annex 2 (Directive 2008/98/EC).

Consult the authorized waste service manager on the assessment and disposal operations in accordance with Annex 1 and Annex 2 (Directive 2008/98/EC).