Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TM52 Wasbenzine
- Product Code
- 301119
- Chemical Name
- Wasbenzine
- Synonyms
- Wasbenzine
Regulatory Identifiers
- CAS Number
- 64742-49-0 Check regulations →
- EC Number
- 920-750-0 Check regulations →
- REACH No.
- 01-2119473851-33
Identified Uses
Degreaser
Manufacturers & Suppliers
Inter-Che-M B.V.
manufacturer
Platinawerf 22-26, 6641TL Beuningen, Postbus 9, 6640AA Beuningen, Holland
+31 (0)24 678 02 20
http://www.interchem.nl
Emergency Contacts
National Poisoning Information Centre - Bilthoven - The Netherlands
+31 (0)30 274 88 88
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Hydrocarbons, C7-C9, n-alkanes, isoalkanes, cyclics
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C7-C9, n-alkanes, isoalkanes, cyclics EC: 920-750-0 | --- | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water. Then consult a doctor. Remove contactlenses.
Rinse mouth.
Immediate Medical Attention
Call for medical help immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2 or powder. Fight larger fights with alcohol resistant foam.
Water with full jet
Formation of toxic gases is possible during heating or in case of fire. During heating or in case of fire poisonous gases are produced.
Cool endangered receptacles with water spray.
Firefighter Protection
Wear fully protective suit. Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Keep away from ignition sources. Particular danger of slipping on leaked/spilled product. Mount respiratory protective device. Wear protective equipment. Keep unprotected persons away.
Do not allow to penetrate the ground/soil. Do not allow product to reach sewage system or any water course. Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols. Keep respiratory protective device available.
Store in a cool location. Keep container tightly sealed. Storage in a collecting room is required. Store receptacle in fume cupboard.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. The glove material has to be impermeable and resistant to the product. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Suitable materials for safety gloves (EN 374): The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Thickness of the gloves ≥ 0.4 mm. Value for the permeation: Level ≥ 480 min. Thickness of the gloves ≥ 0.4 mm (hydrocarbons). Value for the permeation: Level ≥ 480 min (hydrocarbons). The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Solvent resistant protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at environment temperature.
No further relevant information available.
Reacts with oxidising agents. Reacts with strong oxidizing agents.
Stable at environment temperature.
Oxidizing agents.
During a fire, carbonoxides (CO/CO2) and smoke release.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
No further relevant information available.
Ecotoxical effects
Toxic for fish
Additional ecological information
Water hazard class 2 (German Regulation). Toxic for aquatic organisms, fish, and plankton.
12.5 Results of PBT and vPvB assessment
The substance is not classified as PBT or vPvB.
12.6 Other adverse effects
No further relevant information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3295
- Shipping Name
- HYDROCARBONS, LIQUID, N.O.S., ENVIRONMENTALLY HAZARDOUS
- Transport Class
- 3
- Packing Group
- II
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The information contained in this safety data sheet does not constitute the user's own assessment of workplace risks, as required by other health and safety legislation.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is TM52 Wasbenzine known by?
TM52 Wasbenzine is also known as: Wasbenzine
What is the hazard signal word for TM52 Wasbenzine?
The signal word is danger.
What is the physical form of TM52 Wasbenzine?
TM52 Wasbenzine is a fluid with clear color. It has petroleum-like odor.
What is TM52 Wasbenzine used for?
Degreaser
What are the hazard statements for TM52 Wasbenzine?
This substance has 4 hazard statements:
- H225: Highly flammable liquid and vapour.
- H304: May be fatal if swallowed and enters airways.
- H336: May cause drowsiness or dizziness.
- H411: Toxic to aquatic life with long lasting effects.
What is the melting point of TM52 Wasbenzine?
The melting point is Undetermined. and the boiling point is 90-165 °C.