Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- chemagic Wash Buffer 3 Blood
- Product Code
- CMG-837
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Product for analytical use
Manufacturers & Suppliers
Revvity chemagen Technologie GmbH
manufacturer
Arnold-Sommerfeld-Ring 2, 52499 BAESWEILER, DEUTSCHLAND
Emergency Contacts
CHEMTREC
800 424-9300
CHEMTREC
+1-703-672-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethanol EC: 200-578-6 | 64-17-5 | 20 - 40% | Yes |
| sodium perchlorate EC: 231-511-9 | 7601-89-0 | 10 - 20% | Yes |
| butanone EC: 201-159-0 | 78-93-3 | 0.25 - 0.7% | Yes |
| water, distilled, conductivity or of similar purity EC: 231-791-2 | 7732-18-5 | 40 - 60% | No |
| sodium acetate EC: 204-823-8 | 127-09-3 | 1 - 3% | No |
| Polysorbate 20 EC: 500-018-3 | 9005-64-5 | 0.75 - 1.5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately rinse with water.
Rinse opened eye for several minutes under running water.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
No further relevant information available.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Dilute with plenty of water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly.
Keep container tightly sealed.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No further relevant information available.
12.2 Persistence and degradability
12.3 Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
No further relevant information available.
12.5 Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
12.6 Endocrine disrupting properties
Refers to section 11 for information on endocrine disrupting properties.
12.7 Other adverse effects
The product is classified as slightly hazardous for water (Water hazard class 1, German Regulation).
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must not be disposed together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1170
- Shipping Name
- ETHANOL (ETHYL ALCOHOL) solution
- Transport Class
- 3
- Packing Group
- III
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Directive 2012/18/EU applies.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for chemagic Wash Buffer 3 Blood?
The signal word is warning.
What is the physical form of chemagic Wash Buffer 3 Blood?
chemagic Wash Buffer 3 Blood is a fluid appearing as fluid with according to product specification color. It has characteristic odor.
What is chemagic Wash Buffer 3 Blood used for?
Product for analytical use
What are the hazard statements for chemagic Wash Buffer 3 Blood?
This substance has 1 hazard statement:
- H226: Flammable liquid and vapour.
What is the melting point of chemagic Wash Buffer 3 Blood?
The melting point is Undetermined. and the boiling point is 78 °C.