Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Δ9-THCP
- Product Code
- 30171
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
This product is for research use - Not for human or veterinary diagnostic or therapeutic use.
Manufacturers & Suppliers
Cayman Chemical Co.
manufacturer
1180 E. Ellsworth Rd. Ann Arbor, MI 48108 USA
Emergency Contacts
Emergency Contact
+1 (734) 971-3335
Emergency Contact
800-424-9300
Emergency Contact
703-741-5970
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of the substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Acetonitrile | 75-05-8 | 99.5% | Yes |
| Δ9-THCP | 54763-99-4 | 0.5% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. If required, provide artificial respiration. Keep patient warm. Consult doctor if symptoms persist. In case of unconsciousness place patient stably in side position for transportation.
Immediately rinse with water.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Immediately call a doctor.
Immediate Medical Attention
Immediately call a doctor.
Medical Treatment
Acetonitrile is metabolized to cyanide. Patients with significant exposures must be observed for signs of cyanide poisoning and treated accordingly.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Can release vapors that form explosive mixtures at temperatures at or above the flashpoint. Container explosion may occur under fire conditions. Emits toxic fumes under fire conditions. Vapors can travel to a source of ignition and flash back.
Firefighter Protection
Mouth respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Dilute with plenty of water.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
Store in a cool, dry location in well sealed receptacles. Keep container tightly closed. Store in accordance with information listed on the product insert.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use respiratory protective device that is independent of circulating air.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No further relevant information available regarding aquatic toxicity.
Persistence and degradability
No further relevant information available.
Bioaccumulative potential
No further relevant information available.
Mobility in soil
Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
Other adverse effects
No further relevant information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed of together with household garbage. Do not allow product to reach sewage system.
Must not be disposed of together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1648
- Shipping Name
- Acetonitrile solution
- Transport Class
- 3
- Packing Group
- II
Warning: Flammable liquids
Warning: Flammable liquids
Warning: Flammable liquids
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No further relevant information available.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Δ9-THCP?
The signal word is danger.
What is the physical form of Δ9-THCP?
Δ9-THCP is a liquid appearing as according to product specification with according to product specification color. It has aromatic odor.
What is the solubility of Δ9-THCP?
DMF: 50 mg/ml; DMF:PBS (pH 7.2) (1:3): 0.25 mg/ml; DMSO: 60 mg/ml; Ethanol: 35 mg/ml; Methanol: 30 mg/ml
What is Δ9-THCP used for?
This product is for research use - Not for human or veterinary diagnostic or therapeutic use.
What are the hazard statements for Δ9-THCP?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapor.
- H302 + H312 + H332: Harmful if swallowed, in contact with skin or if inhaled.
- H319: Causes serious eye irritation.
What is the melting point of Δ9-THCP?
The melting point is -46 °C (-50.8 °F) and the boiling point is 81 °C (177.8 °F).