NextSDS Logo
Safety Data Sheet EN

(-)-Delta-9-THC, 1mg/ml in Methanol

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
(-)-Delta-9-THC, 1mg/ml in Methanol
Product Form
Mixture
Product Code
LPM-THC-135-1LM

Regulatory Identifiers

CAS Number
N/A
UFI Code
4PWH-50R1-W002-6Q19

Identified Uses

Laboratory use

Uses advised against

No information available

Manufacturers & Suppliers

LGC Limited logo

LGC Limited

manufacturer

Queens Road, Teddington, Middlesex TW11 0LY, UNITED KINGDOM

+44 (0) 20 8943 7000

http://www.lgcstandards.com

Emergency Contacts

CHEMTREC

1-800-424-9300

CHEMTREC

+1 703-741-5970

Emergency Contact

112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Acute Tox. Cat. 3 H301
Acute Tox. Cat. 3 H311
Acute Tox. Cat. 3 H331
Muta. Cat. 1B H340
STOT SE Cat. 1 H370
Flam. Liq. Cat. 2 H225

GHS Pictograms

GHS02 - Flammable

GHS02

GHS06 - Acute toxicity

GHS06

GHS08 - Serious health hazard

GHS08

Hazard Statements

H225 Highly flammable liquid and vapour
H301 Toxic if swallowed
H311 Toxic in contact with skin
H331 Toxic if inhaled
H340 May cause genetic defects
H370 Causes damage to organs

Precautionary Statements

P201 Obtain special instructions before use
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking
P260 Do not breathe dust/fume/gas/mist/vapours/spray
P280 Wear protective gloves/protective clothing/eye protection/face protection
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor
P403 + P235 Store in a well-ventilated place. Keep cool

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Methanol EC: 200-659-6 67-56-1 80 - 100% Yes
(-)-trans-delta9-THC (Dronabinol) EC: 625-153-6 1972-08-3 0.1 - 1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. IF exposed or concerned: Get medical advice/attention. If breathing has stopped, give artificial respiration. Get medical attention immediately. Immediate medical attention is required. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. If breathing is difficult, (trained personnel should) give oxygen.

Symptoms: Coughing and/ or wheezing. Difficulty in breathing.

Skin contact

Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Get immediate medical attention.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not rub affected area. Get immediate medical attention.

Ingestion

Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious person. Get immediate medical attention.

Immediate Medical Attention

Immediate medical attention is required.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Dry chemical. Carbon dioxide (CO2). Water spray. Alcohol resistant foam.

Unsuitable media

Do not scatter spilled material with high pressure water streams.

Specific hazards

Risk of ignition. Keep product and empty container away from heat and sources of ignition.

Instructions

CAUTION: Use of water spray when fighting fire may be inefficient.

Firefighter Protection

Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate personnel to safe areas. Do not touch or walk through spilled material. Do not breathe vapour or mist.

Environmental

Refer to protective measures listed in Sections 7 and 8. Prevent further leakage or spillage if safe to do so. Prevent product from entering drains.

Cleanup methods

Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal. Soak up with inert absorbent material. Pick up and transfer to properly labelled containers.

Materials: inert absorbent material

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Use personal protection equipment. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid contact with skin, eyes or clothing. Take off contaminated clothing and wash it before reuse. Do not eat, drink or smoke when using this product. Remove contaminated clothing and shoes. Do not breathe vapour or mist. In case of insufficient ventilation, wear suitable respiratory equipment.

Storage

Keep containers tightly closed in a dry, cool and well-ventilated place.

Hygiene

Contaminated work clothing should not be allowed out of the workplace. Regular cleaning of equipment, work area and clothing is recommended. Wash hands before breaks and immediately after handling the product. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Wear suitable gloves and eye/face protection. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Do not breathe vapour or mist.

Fire prevention

Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Keep in an area equipped with sprinklers.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Wear protective butyl rubber gloves. Wear suitable gloves. Impervious gloves. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374.

Eyes

Tight sealing safety goggles. Avoid contact with eyes. Wear safety glasses with side shields (or goggles).

Respiratory

No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.

Skin/Body

Long sleeved clothing. Chemical resistant apron. Antistatic boots. Wear suitable protective clothing.

Environmental

Do not allow into any sewer, on the ground or into any body of water.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Liquid
Colour
colourless
Colour Intensity
---
Form
---
Odor
Alcohol.
Odor Threshold
No information available
Ph
No data available
Melting Point
-98 °C
Boiling Point
64.7 °C
Flash Point
11 °C
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
128 hPa @ 20°C
Vapor Density
---
Relative Density
0.791
Bulk Density
No data available
Density
---
Flammability
No data available
Upper Explosive Limit
50 Vol% - 665 g/m³
Lower Explosive Limit
6 Vol% - 80 g/m³
Explosive Limits
---
Auto Ignition Temperature
464 °C
Decomposition Temperature
---
Solubility
---
Partition Coefficient
-0.77
Solubility In Water
---
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
0.544 - 0.59 mPa s @ 25°C
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No information available.

Hazardous reactions

None under normal processing.

Avoid

Heat, flames and sparks. Excessive heat.

Incompatible

None known based on information supplied.

Decomposition

None known based on information supplied.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.7 Other adverse effects

12.1. Toxicity

Ecotoxicity Unknown aquatic toxicity Contains 0 % of components with unknown hazards to the aquatic environment. | Chemical name | Algae/aquatic plants | Fish | Toxicity to microorganisms | Crustacea | | --- | --- | --- | --- | --- |

Contains 0 % of components with unknown hazards to the aquatic environment.

12.1. Toxicity

| Chemical name | Algae/aquatic plants | Fish | Toxicity to microorganisms | Crustacea | | --- | --- | --- | --- | --- | | Methanol | - | LC50: =28200mg/L (96h, Pimephales promelas) LC50: >100mg/L (96h, Pimephales promelas) LC50: 19500 - 20700mg/L (96h, Oncorhynchus mykiss) LC50: 18 - 20mL/L (96h, Oncorhynchus mykiss) LC50: 13500 - 17600mg/L (96h, Lepomis macrochirus) | - | - |

12.2. Persistence and degradability

Persistence and degradability No information available.

12.3. Bioaccumulative potential

Bioaccumulation There is no data for this product. Component Information | Chemical name | Partition coefficient | | --- | --- | | Methanol | -0.77 |

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.5. Results of PBT and vPvB assessment

PBT and vPvB assessment The product does not contain any substance(s) classified as PBT or vPvB. | Chemical name | PBT and vPvB assessment | | --- | --- | | Methanol | The substance is not PBT / vPvB |

The product does not contain any substance(s) classified as PBT or vPvB. Methanol is not considered PBT or vPvB.

12.6. Endocrine disrupting properties

Endocrine disrupting properties No information available.

12.7. Other adverse effects

No information available.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.

Disposal

Should not be released into the environment.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1230
Shipping Name
Methanol mixture
Transport Class
3
Packing Group
II
IMDG

279

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Safety data sheet created pursuant to the requirements of: Regulation (EC) No. 1907/2006 and Regulation (EC) No. 1272/2008

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for (-)-Delta-9-THC, 1mg/ml in Methanol?

The signal word is danger.

What is the physical form of (-)-Delta-9-THC, 1mg/ml in Methanol?

(-)-Delta-9-THC, 1mg/ml in Methanol is a liquid appearing as liquid with colourless color. It has alcohol. odor.

What is (-)-Delta-9-THC, 1mg/ml in Methanol used for?

Laboratory use

What are the hazard statements for (-)-Delta-9-THC, 1mg/ml in Methanol?

This substance has 6 hazard statements:

  • H225: Highly flammable liquid and vapour
  • H301: Toxic if swallowed
  • H311: Toxic in contact with skin
  • H331: Toxic if inhaled
  • H340: May cause genetic defects
  • H370: Causes damage to organs

What is the melting point of (-)-Delta-9-THC, 1mg/ml in Methanol?

The melting point is -98 °C and the boiling point is 64.7 °C.