Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Precipitation Reagent
- Product Code
- 52005
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In vitro diagnostics
Manufacturers & Suppliers
Chromsystems Instruments & Chemicals GmbH
manufacturer
Am Haag 12, 82166 Gräfelfing, Germany
+49 89 18930-0
http://www.chromsystems.com
Emergency Contacts
Emergency poison number
+49 89 19240
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS03
GHS05
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| perchloric acid EC: 231-512-4 | 7601-90-3 | 10 - 25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air. Seek medical treatment.
Wash with polyethylene glycol 400 and then rinse with plenty amounts of water.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Rinse out mouth and then drink plenty of water. Do not induce vomiting. Call a doctor immediately.
Immediate Medical Attention
Seek medical treatment after inhalation, consult a doctor after eye contact, and call a doctor immediately after swallowing.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
May intensify fire; oxidiser.
Firefighter Protection
Wear self-contained respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Wear protective clothing.
Do not allow to enter sewers/ surface or ground water.
Absorb with liquid-binding material
Materials: sand, diatomite, universal binders
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
When diluting always pour product into water and not vice versa. Open and handle receptacle with care.
Keep container tightly sealed. Store at +18 to +30 °C.
The product is not flammable.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Protective gloves. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374. For the permanent contact gloves made of the following materials are suitable: Natural rubber, NR. Recommended thickness of the material: ≥ 0.6 mm. Penetration time: > 480 min. As protection from splashes gloves made of the following materials are suitable: Natural rubber, NR. Recommended thickness of the material: ≥ 0.6 mm. Penetration time: > 480 min.
Tightly sealed goggles
Use suitable respiratory protective device only when aerosol or mist is formed.
Light weight protective clothing
Do not empty into drains.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
May intensify fire; oxidiser. May be corrosive to metals.
Not available.
Heating.
Rubber, light metals, metals
Corrosive gases/vapours, Hydrogen chloride (HCl)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Endocrine disrupting properties
12.7 Other adverse effects
The product is classified as slightly hazardous for water (Water hazard class 1) and must be prevented from entering sewage systems, drainage ditches, or groundwater.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with domestic waste. Do not circulate into the main water supply. Product residues are to be disposed of in compliance with Directive 2008/98/EC on Waste and national and local requirements, e.g. in a suitable incineration plant.
Leave chemicals in original containers. Transfer small quantities to approved transport containers. Protect collection receptacles and containers from access by unauthorized parties.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1802
- Shipping Name
- PERCHLORIC ACID
- Transport Class
- 8
- Packing Group
- II
Warning: Corrosive substances.
Warning: Corrosive substances.
Warning: Corrosive substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No further relevant information available.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Precipitation Reagent?
The signal word is danger.
What is the physical form of Precipitation Reagent?
Precipitation Reagent is a liquid with colourless color. It has odourless odor.
What is Precipitation Reagent used for?
In vitro diagnostics
What are the hazard statements for Precipitation Reagent?
This substance has 3 hazard statements:
- H272: May intensify fire; oxidiser.
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
What is the melting point of Precipitation Reagent?
The melting point is Undetermined. and the boiling point is Undetermined..