LBS 3030, 3060, 3060S, 3565, 3565W

In case person exposed to product feels unwell it should be removed from the place of exposure to fresh air. Provide calm. In case symptoms persist consult a physician.

Remove all contaminated clothing and shoes. Wash contaminated skin with plenty of water and soap. Consult a physician in case of skin irritation.

Symptoms: skin/eye irritations

Thoroughly rinse eyes with plenty of water for at least 15 minutes while lifting the eyelids. Check for and remove (if any and if possible) contact lenses (unless they adhered to eyes). Consult a physician in case an irritation has developed.

Symptoms: skin/eye irritations

Consult a physician

For non-emergency personnel: Avoid contact with the product. Follow advice and instructions of emergency responders. For emergency responders: Avoid contact with the product. Wear work clothing and personal protective equipment.

Small amounts of the product cover with sand or other absorbing material, collect to a labelled container and dispose of in accordance with regulations in force.

Large amounts of released liquid pump over to a labelled container and use or dispose of in accordance with regulations in force.

Cover drains, grates and manholes in order to prevent the product from entering the sewage or effluent systems.

Small amounts of the product cover with sand or other absorbing material, collect to a labelled container and dispose of in accordance with regulations in force. Large amounts of released liquid pump over to a labelled container and use or dispose of in accordance with regulations in force.

Materials: sand or other absorbing material

Observe basic regulations on occupational health, safety and hygiene as well as operating instructions at the workplace. Do not eat and drink when handling the product. Wear proper working clothing. If necessary, use personal protection equipment. Avoid direct contact with the product. Avoid contact with eyes.

Store in drums arranged in up to two (2) layers or closed steel tanks equipped with constantly revolving agitator (of low speed and causing constant flow of the latex within its mass) at the temperature 5 ÷ 40° C.

Do not eat and drink when handling the product. Wear proper working clothing.

Provide ventilation of the workplace.

Not required.

If exposure of employees to sprayed or splashed particles of the product cannot be avoided use safety glasses or a face shield.

In case of insufficient ventilation wear mask with organic vapours filter.

Wear work clothing and shoes.

Avoid release to the environment. Do not discharge into drains. Emissions from vents and processing equipment have to be controlled in order to determine whether they are in compliance with in force regulations on environmental protection. Basing on results of such controls the need for implementation of relevant environmental risk management measures can be determined.

The product is stable under given herein conditions of use and storage. Use of stabilizers and/or antioxidants is not required.

See Section 10.3 of this Safety Data Sheet.

None. Also see Section 10.5 of this Safety Data Sheet.

At temperatures below 5° C irreversible coagulation of the product occurs. At ca. 100° C water contained in the product evaporates at noticeable rate.

Avoid materials which exhibit hazardous reactions upon contact with water.

Thermal decomposition of contained in the product polymer starts at ca. 200° C and is accompanied by formation and subsequent release of aromatic hydrocarbons.

Primary, product wastes should be recovered. Wastes, which could not be recovered should be biologically, chemically or physically transformed or stored on landfill. Landfilling should be performed only for those wastes, destruction of which is technically impossible or ecologically or economically unjustified.

Recovery or destruction of product wastes has to be performed in accordance with regulations in force, in special assigned facility and/or equipment meeting the appropriate requirements.