Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ExoPlus K13
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial use Industrial use resulting in inclusion into or onto a matrix Industrial use
Manufacturers & Suppliers
EOC Belgium nv
manufacturer
Industriezone De Bruwaan 24, BE 9700 Oudenaarde, Belgium
+3255235858
http://www.eocgroup.com
Emergency Contacts
Emergency Contact
+3255235828
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| decamethylcyclopentasiloxane substance listed on REACH Candidate List PBT substance; vPvB substance EC: 208-764-9 | 541-02-6 | 0.1 - 1% | No |
| Dodecamethylcyclohexasiloxane substance listed on REACH Candidate List PBT substance; vPvB substance EC: 208-762-8 | 540-97-6 | 0.1 - 1% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Not applicable.
After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of water and soap.
Symptoms: Repeated or prolonged skin contact may cause irritation.
In case of eye contact, immediately rinse with clean water for 10-15 minutes.
Symptoms: May cause eye irritation.
Rinse mouth.
Symptoms: Nausea.
Immediate Medical Attention
Obtain medical assistance.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
sand. Powder. Foam.
None known.
Aqueous liquid. Does not present any particular risk in the event of a fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid repeated or prolonged skin contact.
Absorb remaining liquid with sand or inert absorbent and remove to safe place.
Contain leaking substance, pump over in suitable containers.
Avoid release to the environment.
Contain leaking substance, pump over in suitable containers. Absorb remaining liquid with sand or inert absorbent and remove to safe place.
Materials: sand or inert absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
When using do not eat or drink. Provide adequate ventilation. Handling temperature: see technical datasheet
Protect against frost. Protect against direct sunlight.
Use good personal hygiene practices. When using do not eat or drink.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Do not discharge into drains or waterways without neutralizing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable in use and storage conditions as recommended in item 7.
Combustion generates: Carbon oxides (CO, CO2).
None known.
Stable in use and storage conditions as recommended in item 7.
No additional information available
Combustion generates: Carbon oxides (CO, CO2).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
The substance is not classified as hazardous to the aquatic environment, neither short-term (acute) nor long-term (chronic).
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
12.2. Persistence and degradability
12.2. Persistence and degradability
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
The substances decamethylcyclopentasiloxane and Dodecamethylcyclohexasiloxane meet the PBT and vPvB criteria of REACH regulation, in accordance with Annex XIII.
12.6. Endocrine disrupting properties
The mixture does not contain substances with endocrine disrupting properties at concentrations equal to or greater than 0.1%.
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Refer to manufacturer's information.
Avoid release to the environment. Refer to special instructions/safety data sheets.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Hazard Classification: Not applicable. No labelling obligation. Not in EINECS.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ExoPlus K13?
The signal word is no signal word.
What is the physical form of ExoPlus K13?
ExoPlus K13 is a liquid with yellowish. color. It has weak. odor.
What is the solubility of ExoPlus K13?
insoluble in water.
What is ExoPlus K13 used for?
Industrial use Industrial use resulting in inclusion into or onto a matrix Industrial use
What is the melting point of ExoPlus K13?
The melting point is Not available and the boiling point is 100 °C.