Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- d,l-Amphetamine-D11.HCl, 0.1mg/ml in Methanol
- Product Code
- LPM-AMP-574-HC-0.1LM
- Synonyms
- (as free base)
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- J25J-Q036-700N-224U
Identified Uses
Laboratory use
Uses advised against
No information available
Manufacturers & Suppliers
LGC Limited
manufacturer
Queens Road, Teddington, Middlesex TW11 0LY, UNITED KINGDOM
+44 (0) 20 8943 7000
http://www.lgcstandards.com
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
+1 703-741-3877
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Methanol EC: 200-659-6 | 67-56-1 | 80 - 100% | Yes |
| (±)-Amphetamine-d11 hydrochloride | 2714436-86-7 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If breathing has stopped, give artificial respiration. Get medical attention immediately. Immediate medical attention is required. Do not use mouth-to-mouth method if victim ingested or inhaled the substance; give artificial respiration with the aid of a pocket mask equipped with a one-way valve or other proper respiratory medical device. If breathing is difficult, (trained personnel should) give oxygen. IF exposed or concerned: Get medical advice/attention.
Symptoms: Coughing and/ or wheezing. Difficulty in breathing.
Wash off immediately with soap and plenty of water while removing all contaminated clothes and shoes. Get immediate medical attention.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Keep eye wide open while rinsing. Do not rub affected area. Get immediate medical attention.
Do NOT induce vomiting. Rinse mouth. Never give anything by mouth to an unconscious person. Get immediate medical attention.
Immediate Medical Attention
Immediate medical attention is required.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical. Carbon dioxide (CO2). Water spray. Alcohol resistant foam.
Do not scatter spilled material with high pressure water streams.
Risk of ignition. Keep product and empty container away from heat and sources of ignition.
In the event of fire, cool tanks with water spray.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not breathe vapour or mist. Evacuate personnel to safe areas. Use personal protective equipment as required. Avoid contact with skin, eyes or clothing. Ensure adequate ventilation. Keep people away from and upwind of spill/leak. ELIMINATE all ignition sources (no smoking, flares, sparks or flames in immediate area). Pay attention to flashback. Take precautionary measures against static discharges. All equipment used when handling the product must be grounded. Do not touch or walk through spilled material.
Refer to protective measures listed in Sections 7 and 8. Prevent further leakage or spillage if safe to do so. Prevent product from entering drains.
Dam up. Soak up with inert absorbent material. Pick up and transfer to properly labelled containers.
Materials: inert absorbent material
Related Products
Similar products with comparable safety profiles
d,l-MDMA-D5.HCl, 0.1mg/ml in Methanol
UFI: 2VPH-606P-P00Y-XR06
(±)-Amphetamine (1.0 mg/ml) in Methanol
---
(±)-Methamphetamine (1.0 mg/ml) in Methanol
---
Cocaine-D3.HCl, 0.1mg/ml in Methanol
UFI: A7QG-G0SY-C009-SUY5
(±)-Amphetamine (1.0 mg/ml)
---
(±)-MDMA-D5 (1.0 mg/ml) in Methanol
---
(±)-MDMA ((±)-3,4-Methylenedioxymethamphetamine) (1.0 mg/ml) in Methanol
---
(±)-MDMA ((±)-3,4-Methylenedioxymethamphetamine) (1.0 mg/ml) in Methanol
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Use personal protection equipment. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Use spark-proof tools and explosion-proof equipment. Keep in an area equipped with sprinklers. Use according to package label instructions. Do not breathe vapour or mist. In case of insufficient ventilation, wear suitable respiratory equipment. Handle product only in closed system or provide appropriate exhaust ventilation. Do not eat, drink or smoke when using this product. Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or clothing. Take off contaminated clothing and wash it before reuse.
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach of children. Store locked up. Please refer to the manufacturer's certificate for specific storage and transport temperature conditions.
Wash hands before breaks and immediately after handling the product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Avoid contact with skin, eyes or clothing. Do not eat, drink or smoke when using this product. Wash hands before breaks and after work. Wear suitable gloves and eye/face protection. Contaminated work clothing should not be allowed out of the workplace. Regular cleaning of equipment, work area and clothing is recommended.
Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Use grounding and bonding connection when transferring this material to prevent static discharge, fire or explosion. Keep in an area equipped with sprinklers.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear protective butyl rubber gloves. Wear suitable gloves. Impervious gloves. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374.
Tight sealing safety goggles. Avoid contact with eyes. Wear safety glasses with side shields (or goggles).
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.
Long sleeved clothing. Chemical resistant apron. Antistatic boots. Wear suitable protective clothing.
Do not allow into any sewer, on the ground or into any body of water.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No information available.
None under normal processing.
Heat, flames and sparks. Excessive heat.
None known based on information supplied.
None known based on information supplied.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Contains 0 % of components with unknown hazards to the aquatic environment.
12.1. Toxicity
12.2. Persistence and degradability
No information available.
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.4. Mobility in soil
No information available.
12.5. Results of PBT and vPvB assessment
Based on available data, the classification criteria are not met. Methanol is not PBT / vPvB.
12.6. Endocrine disrupting properties
Based on available data, the classification criteria are not met.
12.7. Other adverse effects
No information available. PMT or vPvM properties: Based on available data, the classification criteria are not met.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.
Should not be released into the environment.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1230
- Shipping Name
- Methanol mixture
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is d,l-Amphetamine-D11.HCl, 0.1mg/ml in Methanol known by?
d,l-Amphetamine-D11.HCl, 0.1mg/ml in Methanol is also known as: (as free base)
What is the hazard signal word for d,l-Amphetamine-D11.HCl, 0.1mg/ml in Methanol?
The signal word is danger.
What is the physical form of d,l-Amphetamine-D11.HCl, 0.1mg/ml in Methanol?
d,l-Amphetamine-D11.HCl, 0.1mg/ml in Methanol is a liquid appearing as liquid with colourless color. It has alcohol odor.
What is d,l-Amphetamine-D11.HCl, 0.1mg/ml in Methanol used for?
Laboratory use
What are the hazard statements for d,l-Amphetamine-D11.HCl, 0.1mg/ml in Methanol?
This substance has 5 hazard statements:
- H225: Highly flammable liquid and vapour.
- H301: Toxic if swallowed.
- H311: Toxic in contact with skin.
- H331: Toxic if inhaled.
- H370: Causes damage to organs.
What is the melting point of d,l-Amphetamine-D11.HCl, 0.1mg/ml in Methanol?
The melting point is -98 °C and the boiling point is 64.7 °C.