ctx123 Hypocal Stick

Take the victim into open air; keep them warm and calm. If breathing is irregular or stops, perform artificial respiration.

Symptoms: internal damage, anaesthetic effects

Remove contaminated clothing. Wash skin vigorously with water and soap or a suitable skin cleaner. NEVER use solvents or thinners.

Symptoms: burns

Wash eyes with plenty of clean and cool water for at least 10 minutes while pulling eyelids up, and seek medical assistance. Dont let the person to rub the affected eye.

Symptoms: burns, irreversible damage

If accidentally ingested, seek immediate medical attention. Keep calm. NEVER induce vomiting.

Symptoms: internal damage

Water or water-foam extinguisher with CO2 gas.

Chemical powder or nitrogen, CO2

Exposure to combustion or decomposition products can be harmful to your health. The product may cause or facilitate the combustion of other materials.

Use water to cool tanks, cisterns, or containers close to the heat source or fire. Take wind direction into account.

For exposure control and individual protection measures, see section 8.

Product dangerous for the environment, in case of large spills or if the product contaminates lakes, rivers, or sewers, inform the responsible authorities according to local legislation. Prevent the contamination of drains, surface or subterranean waters, and the ground.

clean the area immediately with a suitable decontaminant.

For personal protection, see section 8. In the application area, smoking, eating, and drinking must be prohibited. Follow legislation on occupational health and safety. Never use pressure to empty the containers. They are not pressure-resistant containers. Keep the product in containers made of a material identical to the original.

Store the containers between 5 and 25 °C, in a dry and well-ventilated place, far from sources of heat and direct solar light.

In the application area, smoking, eating, and drinking must be prohibited.

Keep far away from ignition points. Do not smoke.

Provide adequate ventilation, which can be achieved by using good local exhaust-ventilation and a good general exhaust system.

PPE: Protective gloves against chemicals. Characteristics: «CE» marking, category III. CEN standards: EN 374-1, En 374-2, EN 374-3, EN 420. Maintenance: Keep in a dry place, away from any sources of heat, and avoid exposure to sunlight as much as possible. Do not make any changes to the gloves that may alter their resistance, or apply paints, solvents or adhesives. Observations: Gloves should be of the appropriate size and fit the user's hand well, not being too loose or too tight. Always use with clean, dry hands. Material: PVC (polyvinyl chloride) Breakthrough time (min.): > 480 Material thickness (mm): 0,35

PPE: Face shield. Characteristics: «CE» marking, category II. Face and eye protector against splashing liquid. CEN standards: EN 165, EN 166, EN 167, EN 168. Maintenance: Visibility through lenses should be ideal. Therefore, these parts should be cleaned daily. Protectors should be disinfected periodically following the manufacturer's instructions. Make sure that mobile parts move smoothly. Observations: Face shields should offer a field of vision with a dimension in the central line of, at least, 150 mm vertically once attached to the frame.

PPE: Particle filter mask. Characteristics: «CE» marking, category III. Made of filtering material, it covers nose, mouth and chin. CEN standards: EN 149. Maintenance: Check for any tears, defects, etc. before use. Since it is disposable individual protection equipment, it should be replaced after use. Observations: Does not protect worker unless properly adjusted. Follow the manufacturer's instructions regarding suitable use of the equipment. Filter Type needed: P2

PPE: Protective clothing. Characteristics: «CE» marking, category II. Protective clothing should not be too tight or loose in order not to obstruct the user's movements. CEN standards: EN 340. Maintenance: In order to guarantee uniform protection, follow the washing and maintenance instructions provided by the manufacturer. Observations: The protective clothing should offer a level of comfort in line with the level of protection provided in terms of the hazard against which it protects, bearing in mind environmental conditions, the user's level of activity and the expected time of use.

Stable under the recommended handling and storage conditions (see section 7).

Contact with acids liberates toxic gas.

Do not use together with other products. May release dangerous gases (chlorine).

Avoid any improper handling.

other products

chlorine

Follow the provisions of Directive 2008/98/EC regarding waste management.

Waste and empty containers must be handled and eliminated according to current, local/national legislation.