Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Det&Rinse
- Product Form
- Mixtures
- Product Code
- DB1016A0
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Oven cleaners
Manufacturers & Suppliers
Unox Inc
manufacturer
987 Ashe Parkway Denver, NC 28037
800-489-8669
Emergency Contacts
3E Company
1.866.519.4752
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Dipropylene glycol monomethyl ether | 34690-94-8 | 1 - 5% | Yes |
| potassium hydroxide, caustic potash | 1310-58-3 | 1 - 4.5% | Yes |
| Alcohols, C12-14, ethoxylated propoxylated | 68439-51-0 | 1 - 3% | No |
| D-Glucopyranose, oligomeric, decyl octyl glycosides | 68515-73-1 | 1 - 3% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove victim to fresh air and keep at rest in a position comfortable for breathing. Seek medical attention immediately.
Symptoms: Corrosive to respiratory system. Causes burns.
Immediately rinse with plenty of water (for at least 15 minutes). Remove contaminated clothing immediately and dispose of safely. Wash contaminated clothing before reuse. Seek medical attention immediately.
Symptoms: Causes severe burns.
In case of contact with eyes, rinse immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Subsequently consult an ophthalmologist. Remove contact lenses, if present and easy to do. Continue rinsing. Protect uninjured eye.
Symptoms: Causes serious eye damage. Corneal opacity. Iris lesions.
Immediately call a POISON CENTER or doctor/ physician. Never give anything by mouth to an unconscious person. Do not induce vomiting.
Symptoms: Severe irritation or burns to the mouth, throat, oesophagus, and stomach.
Immediate Medical Attention
Seek medical attention immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water fog, carbon dioxide (CO2), dry chemical powder, foam.
Do not use water jet.
Combustible. On burning, release of (highly) toxic gases/vapours.
Cool down the containers exposed to heat with a water spray. Move undamaged containers from immediate hazard area if it can be done safely.
Firefighter Protection
Extra personal protection: complete protective clothing including self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Immediately contact emergency personnel. Eliminate all ignition sources if safe to do so. Spilled material may present a slipping hazard. Evacuate unnecessary personnel. Avoid inhalation of vapours. Ventilate affected area. Consult an expert.
Recover small spills with a suitable absorbent, like diatomaceous earth.
Recover large spills by pumping (use an explosion proof or hand pump).
Avoid release to the environment.
Ventilate affected area. Wear personal protection equipment. Collect in closed containers for disposal. Wash with plenty of soap and water. Consult the appropriate authorities about waste disposal. Wash contaminated area with large amounts of water.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes. Avoid breathing mist or vapor. Keep away from sources of ignition - No smoking. Take any precaution to avoid mixing with incompatible materials. Open and handle container with care. Ensure operatives are trained to minimize exposures. Avoid formation of vapours.
Store tightly closed in a dry, cool and well-ventilated place. Keep out of direct sunlight.
Do not eat, drink or smoke when using this product. Wash hands thoroughly after handling. Contaminated work clothing should not be allowed out of the workplace.
Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide adequate ventilation.
Chemical resistant gloves (nitrile-rubber, PVC, neoprene). Break through time: ≥ 480 min. Thickness of glove material: 0.4-0.5 mm. Use equipment for hand protection tested and approved in accordance with OSHA requirements (29 CFR 1910.138)
Chemical goggles or face shield with safety glasses. Do not wear contact lenses. Use equipment for eye protection tested and approved in accordance with OSHA requirements (29 CFR 1910.133)
An approved organic vapour respirator/supplied air or self-contained breathing apparatus must be used when vapour concentration exceeds applicable exposure limits. (NIOSH-approved)
Wear work clothes with long sleeves. Wear suitable protective clothing or Rubber apron. (NIOSH-approved). Materials for protective clothing: Rubbers. PVC (Polyvinyl chloride). Natural fibres (e.g. cotton). (NIOSH-approved)
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Reacts exothermically with (some) acids. Reacts with (strong) oxidizers.
None under normal conditions.
Keep away from acids. Oxidizing agent. Peroxides.
Acids. Oxidizing agent. Peroxides. Flammable materials.
On combustion or on thermal decomposition (pyrolysis) releases Nitrogen oxides (NOx). Carbon dioxide (CO2). Phosphorus oxides. Sulfur oxides. Pyrolysis products, toxic.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
12.2. Persistence and degradability
The methods for determining the biological degradability are not applicable to inorganic substances.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
Low bioaccumulation potential.
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.3. Bioaccumulative potential
12.4. Mobility in soil
Expected to be highly mobile in soil.
12.5. Other adverse effects
No known effects from this product regarding global warming.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Reuse or recycle following decontamination. External recovery and recycling of waste should comply with applicable local and/or national regulations. Recycling is preferred to disposal or incineration.
Dispose of this material and its container at hazardous or special waste collection point.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1814
- Shipping Name
- Potassium hydroxide, solution
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Det&Rinse?
The signal word is danger.
What is the physical form of Det&Rinse?
Det&Rinse is a liquid with straw yellow color. It has characteristic odor.
What is the solubility of Det&Rinse?
soluble in water.
What is Det&Rinse used for?
Oven cleaners
What are the hazard statements for Det&Rinse?
This substance has 4 hazard statements:
- H227: Combustible liquid
- H290: May be corrosive to metals
- H315: Causes skin irritation
- H318: Causes serious eye damage
What is the melting point of Det&Rinse?
The melting point is No data available and the boiling point is No data available.