Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- NITROGEN
- Product Code
- LIND-P086
- Chemical Name
- NITROGEN
- Synonyms
- LASER Nitrogen, LASER Nitrogen Ultra, MAPAX® N; Nitrogen Lasershield GR4.8; Nitrogen Lasershield GR5.0
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Industrial and professional use.
Uses advised against
Consumer use
Manufacturers & Suppliers
Messer North America, Inc. - Messer LLC - Messer Merchant Production LLC
manufacturer
200 Somerset Corporate Blvd, Suite 7000 Bridgewater, NJ 08807
908-464-8100
http://www.messer-us.com
Messer Gas Puerto Rico, Inc.
manufacturer
Road 869, Km 1.8 Barrio Palmas, Catano, PR 00962
787-641-7445
Emergency Contacts
Messer National Operations Center, US
+1 800-232-4726
CHEMTREC
1-800-424-9300
CHEMTREC
+1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS04
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| NITROGEN | 7727-37-9 | 99% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air and keep comfortable for breathing. If breathing is difficult, give oxygen. If breathing has stopped, give artificial respiration. Get medical attention immediately.
Symptoms: Simple asphyxiant. May cause suffocation by displacing the oxygen in the air. Exposure to oxygen-deficient atmosphere (<19.5%) may cause dizziness, drowsiness, nausea, vomiting, excess salivation, diminished mental alertness, loss of consciousness and death. Exposure to atmospheres containing 8-10% or less oxygen will bring about unconsciousness without warning and so quickly that the individuals cannot help or protect themselves. Lack of sufficient oxygen may cause serious injury or death.
None under normal use. Get medical attention if symptoms occur.
None under normal use. Get medical attention if symptoms occur.
Not an expected route of exposure.
Immediate Medical Attention
Get medical attention immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
None.
Non-flammable gas. Cylinders may rupture under extreme heat.
Continue to cool fire exposed cylinders until flames are extinguished. Damaged cylinders should be handled only by specialists.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Ensure adequate ventilation, especially in confined areas. Monitor oxygen level. Wear self-contained breathing apparatus when entering area unless atmosphere is proved to be safe.
Prevent spreading of vapors through sewers, ventilation systems and confined areas.
Return cylinder to Messer or an authorized distributor.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Protect cylinders from physical damage; do not drag, roll, slide or drop. When moving cylinders, even for short distance, use a cart designed to transport cylinders. Never attempt to lift a cylinder by its valve protection cap. Never insert an object (e.g. wrench, screwdriver, pry bar,etc.) into valve cap openings. Doing so may damage valve, causing leak to occur. Use an adjustable strap wrench to remove over-tight or rusted caps. Use only with adequate ventilation. Use a backflow preventive device in piping. Close valve after each use and when empty. If user experiences any difficulty operating cylinder valve discontinue use and contact supplier. Ensure the complete gas system has been checked for leaks before use. Never put cylinders into trunks of cars or unventilated areas of passenger vehicles. Never attempt to refill a compressed gas cylinder without the owner's written consent. Never strike an arc on a compressed gas cylinder or make a cylinder a part of an electrical circuit. Only experienced and properly instructed persons should handle gases under pressure. Always store and handle compressed gas cylinders in accordance with Compressed Gas Association, pamphlet CGA-P1, Safe Handling of Compressed Gases in Containers. Use only with equipment rated for cylinder pressure. For additional recommendations consult Compressed Gas Association's (CGA) Safety Bulletin SB-2, Oxygen-Deficient Atmospheres.
Store in cool, dry, well-ventilated area of non-combustible construction away from heavily trafficked areas and emergency exits. Keep at temperatures below 52°C / 125°F. Cylinders should be stored upright with valve protection cap in place and firmly secured to prevent falling. Full and empty cylinders should be segregrated. Use a "first in-first out" inventory system to prevent full cylinders from being stored for excessive periods of time. Stored containers should be periodically checked for general condition and leakage.
Never strike an arc on a compressed gas cylinder or make a cylinder a part of an electrical circuit.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Not reactive under normal conditions
None under normal processing.
None under recommended storage and handling conditions (see Section 7).
None known.
None known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Ecotoxicity
No known effect.
Persistence and degradability
Not applicable.
Bioaccumulation
No known effect.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Return in the shipping container PROPERLY LABELED WITH ANY VALVE OUTLET PLUGS OR CAPS SECURED AND VALVE PROTECTION CAP IN PLACE to Messer for proper disposal.
Do not attempt to dispose of residual waste or unused quantities.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1066
- Shipping Name
- Nitrogen, compressed
- Transport Class
- 2.2
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product complies with TSCA, DSL/NDSL, and EINECS/ELINCS inventories. It does not contain substances subject to SARA 313, CERCLA, Clean Air Act HAPs, Clean Water Act, or California Proposition 65 reporting requirements.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is NITROGEN known by?
NITROGEN is also known as: LASER Nitrogen, LASER Nitrogen Ultra, MAPAX® N; Nitrogen Lasershield GR4.8; Nitrogen Lasershield GR5.0
What is the hazard signal word for NITROGEN?
The signal word is warning.
What is the physical form of NITROGEN?
NITROGEN is a gas appearing as colorless . It has odorless odor.
What is NITROGEN used for?
Industrial and professional use.
What are the hazard statements for NITROGEN?
This substance has 2 hazard statements:
- H280: Contains gas under pressure; may explode if heated
- May displace oxygen and cause rapid suffocation
What is the melting point of NITROGEN?
The melting point is -209.9 °C / -345.9 °F and the boiling point is -196 °C.