Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- COLORWORKS COLORSPRAY VARIOUS COLOURS 400 ML
- Product Code
- 918501-918531
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint
Manufacturers & Suppliers
MOTIP DUPLI B.V.
manufacturer
Wolfraamweg 2, NL-8471 XC Wolvega, The Netherlands
+31 (0)561 694400
Emergency Contacts
Emergency Contact
+31 (0)561-694400
09:00h - 17:00h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| acetone EC: 200-662-2 | 67-64-1 | 25 - 50% | Yes |
| propane EC: 200-827-9 | 74-98-6 | 12.5 - 20% | Yes |
| Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics EC: 919-857-5 | --- | 12.5 - 20% | Yes |
| butane EC: 203-448-7 | 106-97-8 | 10 - 12.5% | Yes |
| isobutane EC: 200-857-2 | 75-28-5 | 10 - 12.5% | Yes |
| Oleic acid, compound with (Z)-N-octadec-9-enylpropane-1,3-diamine (2:1) EC: 251-846-4 | 34140-91-5 | 0.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Immediate Medical Attention
Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
During heating or in case of fire poisonous gases are produced.
Firefighter Protection
Mouth respiratory protective device.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mount respiratory protective device. Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Related Products
Similar products with comparable safety profiles
DUPLI-COLOR Sprayplast different colours 400ml
---
DUPLI-COLOR Sprayplast different colours 750ml, 3000ml
---
DUPLI-COLOR® CAR'S RALLY SPRAY PAINT RAL VARIOUS COLOURS 400 ML
---
7300 CombiColor Spraycans
---
MOTIP SprayPlast different colours 400ml
---
DUPLI-COLOR Color Spray Quality Paint (silk mat)
---
DUPLI-COLOR Color Spray Quality Paint (glossy)
---
DUPLI-COLOR Sprayplast Verdünner 375ml
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Keep respiratory protective device available.
Pressurised container: protect from sunlight and do not expose to temperatures exceeding 50°C, i.e. electric lights. Do not pierce or burn, even after use.
Do not spray onto a naked flame or any incandescent material. Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Butyl rubber gloves with a thickness of 0.4 mm are resistant to: Acetone: 480 min, Butyl acetate: 60 min, Ethyl acetate: 170 min, Xylene: 42 min. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use self-contained respiratory protective device.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
12.6 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must not be disposed together with household garbage.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2.1
Warning: Gases.
Warning: Gases.
Warning: Gases.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Directive 2012/18/EU, REACH Annex XVII
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for COLORWORKS COLORSPRAY VARIOUS COLOURS 400 ML?
The signal word is danger.
What is the physical form of COLORWORKS COLORSPRAY VARIOUS COLOURS 400 ML?
COLORWORKS COLORSPRAY VARIOUS COLOURS 400 ML is a aerosol appearing as different according to colouring with different according to colouring color. It has solvent-like odor.
What is COLORWORKS COLORSPRAY VARIOUS COLOURS 400 ML used for?
Paint
What are the hazard statements for COLORWORKS COLORSPRAY VARIOUS COLOURS 400 ML?
This substance has 3 hazard statements:
- H222: Extremely flammable aerosol. Pressurised container: May burst if heated.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of COLORWORKS COLORSPRAY VARIOUS COLOURS 400 ML?
The melting point is Undetermined. and the boiling point is Not applicable, as aerosol..