Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- DUPLI-COLOR Sprayplast different colours 750ml, 3000ml
- Product Code
- 388170, 388187, 388194, 388200, 397455, 397462, 397479, 397486, 399541, 399558, 399565, 399572, 399589, 399596, 399602
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Paint
Manufacturers & Suppliers
MOTIP DUPLI GmbH
manufacturer
Kurt Vogelsang Strasse 6, D-74855 Haßmersheim
+49/6266/75-0
Emergency Contacts
Emergency Contact
+49 6266-75-310
Mo - Th 08:00 am - 04:00 pm, Fr 08:00 am - 00:30 pm
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethyl acetate EC: 205-500-4 | 141-78-6 | 50 - 75% | Yes |
| xylene, mixture of isomers EC: 215-535-7 | 1330-20-7 | 5 - 10% | Yes |
| butan-1-ol EC: 200-751-6 | 71-36-3 | 2.5% | Yes |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 2.5% | Yes |
| ethylbenzene EC: 202-849-4 | 100-41-4 | 2.5% | Yes |
| Hydrocarbons EC: 918-668-5 | --- | 0.5% | Yes |
The content of Benzene (EINECS-Nr. 200-753-7) in the ingredients is less than 0,1% (Note P Annex 1 67/548 EU), so the classification as carcinogen need not to apply.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, bluspoeder of waterstraal. Grotere brand met waterstraal of met schuim. Vaten met water afkoelen.
Water with full jet
No further relevant information available.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow product to reach sewage system or any water course. Prevent seepage into sewage system, workpits and cellars.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
DUPLI-COLOR Sprayplast different colours 400ml
---
DUPLI-COLOR Sprayplast Verdünner 375ml
---
MOTIP SprayPlast different colours 400ml
---
DUPLI-COLOR Color Spray Quality Paint (glossy)
---
DUPLI-COLOR Color Spray Quality Paint (silk mat)
---
Motip Sprayplast 500ml
---
COLORMARK Ecomarker Chalk various colours 500ml/750ml
---
Siliconspray 300 ML
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols.
Store in a cool location. Keep container tightly sealed. Store in cool, dry conditions in well sealed receptacles.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Solvent resistant gloves. In case of contact with spray dust protective gloves made of butyl should be used (min. 0.4 mm thick), e.g. KCL Camatril, article no. 898 or similar products. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Butyl rubber, BR. Penetration time of glove material: Butyl rubber gloves with a thickness of 0.4 mm are resistant to: Acetone: 480 min, Butyl acetate: 60 min, Ethyl acetate: 170 min, Xylene: 42 min
Safety glasses
Not necessary if room is well-ventilated. Otherwise, filter class A / P2 or self contained.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- PAINT
- Transport Class
- 3
- Packing Group
- II
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for DUPLI-COLOR Sprayplast different colours 750ml, 3000ml?
The signal word is danger.
What is the physical form of DUPLI-COLOR Sprayplast different colours 750ml, 3000ml?
DUPLI-COLOR Sprayplast different colours 750ml, 3000ml is a fluid appearing as form: fluid, colour: according to product specification with according to product specification color. It has characteristic odor.
What is DUPLI-COLOR Sprayplast different colours 750ml, 3000ml used for?
Paint
What are the hazard statements for DUPLI-COLOR Sprayplast different colours 750ml, 3000ml?
This substance has 4 hazard statements:
- H225: Highly flammable liquid and vapour.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of DUPLI-COLOR Sprayplast different colours 750ml, 3000ml?
The melting point is Undetermined. and the boiling point is 77 °C.