NextSDS Logo
Safety Data Sheet EN

OKS 3760

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
OKS 3760

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Lubricating oil

Uses advised against

Restricted to professional users.

Manufacturers & Suppliers

O

OKS Spezialschmierstoffe GmbH

manufacturer

Ganghoferstr. 47 82216 Maisach-Gernlinden Deutschland

+49 8142 3051 500

Emergency Contacts

Emergency Contact

+49 8142 3051 517

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Aquatic Chronic Cat. 3 H412

GHS Pictograms

Hazard Statements

H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P273 Avoid release to the environment.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Synthetic hydrocarbon oil

Chemical Name CAS Number Concentration Hazardous
O,O,O-triphenyl phosphorothioate EC: 209-909-9 597-82-0 0.025 - 0.1% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. If breathing is irregular or stopped, administer artificial respiration.

Skin contact

Remove contaminated clothing. If irritation develops, get medical attention. In case of contact, immediately flush skin with plenty of water. Wash clothing before reuse. Thoroughly clean shoes before reuse.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. If eye irritation persists, consult a specialist.

Ingestion

Move the victim to fresh air. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. Do NOT induce vomiting. Rinse mouth with water. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

If signs/symptoms continue, get medical attention. If unconscious, place in recovery position and seek medical advice. If irritation develops, get medical attention. If eye irritation persists, consult a specialist.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Unsuitable media

High volume water jet

Specific hazards

Exposure to decomposition products may be a hazard to health.

Instructions

Standard procedure for chemical fires.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate personnel to safe areas. Use personal protective equipment. Ensure adequate ventilation. Refer to protective measures listed in sections 7 and 8.

Environmental

Do not allow contact with soil, surface or ground water. Prevent further leakage or spillage if safe to do so.

Cleanup methods

Contain spillage, and then collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13).

Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid inhalation of vapour or mist. Avoid contact with skin and eyes. For personal protection see section 8. Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product. Do not ingest. Do not repack. Do not re-use empty containers. These safety instructions also apply to empty packaging which may still contain product residues. Keep container closed when not in use.

Storage

Store in original container. Keep container closed when not in use. Keep in a dry, cool and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in accordance with the particular national regulations. Keep in properly labelled containers.

Hygiene

Wash face, hands and any exposed skin thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

Material: Nitrile rubber, Break through time: > 10 min, Protective index: Class 1, Remarks: For prolonged or repeated contact use protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case.

Eyes

Safety glasses with side-shields

Respiratory

Not required; except in case of aerosol formation. Filter type: Filter type A-P

Skin/Body

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.

Environmental

Air: Should not be released into the environment. Exhaust air must be cleaned using approved equipment before returning it to the work place. Soil: Do not allow contact with soil, surface or ground water. The product should not be allowed to enter drains, water courses or the soil. Water: Do not allow contact with soil, surface or ground water. The product should not be allowed to enter drains, water courses or the soil.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
yellow
Colour Intensity
---
Form
---
Odor
characteristic
Odor Threshold
No data available
Ph
Not applicable
Melting Point
No data available
Boiling Point
No data available
Flash Point
>= 240 °C Method: ISO 2592, open cup
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
No data available
Vapor Pressure
< 0.001 hPa (20 °C)
Vapor Density
---
Relative Density
0.837 (20 °C) Reference substance: Water The value is calculated
Bulk Density
Not applicable
Density
0.84 g/cm3 (20 °C)
Flammability
Flammability (solid, gas): Not applicable
Upper Explosive Limit
No data available
Lower Explosive Limit
No data available
Explosive Limits
---
Auto Ignition Temperature
No data available
Decomposition Temperature
No data available
Solubility
---
Partition Coefficient
No data available
Solubility In Water
insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
No data available
Kinematic Viscosity
100 mm2/s (40 °C)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No hazards to be specially mentioned.

Hazardous reactions

No dangerous reaction known under conditions of normal use.

Avoid

No conditions to be specially mentioned.

Incompatible

No materials to be especially mentioned.

Decomposition

No decomposition if stored and applied as directed.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Product: Toxicity to fish : Remarks: Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. Toxicity to daphnia and other aquatic invertebrates : Remarks: No data available Toxicity to algae/aquatic plants : Remarks: No data available Toxicity to microorganisms : Remarks: No data available

12.1 Toxicity

Toxicity to fish : LC50 (Brachydanio rerio (zebrafish)): > 100 mg/l Exposure time: 96 h Method: OECD Test Guideline 203 Toxicity to daphnia and other aquatic invertebrates : EC50 (Daphnia magna (Water flea)): > 100 mg/l Exposure time: 48 h Test Type: Immobilization Method: OECD Test Guideline 202 Toxicity to algae/aquatic plants : EC50 (Desmodesmus subspicatus (green algae)): > 100 mg/l Exposure time: 72 h Method: OECD Test Guideline 201 Toxicity to microorganisms : EC50 (activated sludge): > 100 mg/l Exposure time: 3 h Method: OECD Test Guideline 209 Toxicity to fish (Chronic toxicity) : NOEC: 0.0017 mg/l Exposure time: 97 d Species: Oncorhynchus mykiss (rainbow trout) Test Type: flow-through test Method: OECD Test Guideline 210 Toxicity to daphnia and other aquatic invertebrates (Chronic toxicity) : NOEC: 0.00724 mg/l Exposure time: 21 d Species: Daphnia magna (Water flea) Test Type: semi-static test Method: OECD Test Guideline 211 M-Factor (Chronic aquatic toxicity) : 10

The substance exhibits acute aquatic toxicity values > 100 mg/L across fish, daphnia, algae, and microorganisms. Chronic toxicity studies show NOEC values of 0.0017 mg/L for fish and 0.00724 mg/L for daphnia. An M-Factor of 10 is assigned for chronic aquatic toxicity.

12.2 Persistence and degradability

Product: Biodegradability : Remarks: No data available Physico-chemical removability : Remarks: No data available Components:

No data available for biodegradability or physico-chemical removability.

12.2 Persistence and degradability

O,O,O-triphenyl phosphorothioate: Biodegradability : Result: Not rapidly biodegradable

12.3 Bioaccumulative potential

Product: Bioaccumulation : Remarks: No data available Components: O,O,O-triphenyl phosphorothioate: Bioaccumulation : Species: Cyprinus carpio (Carp) Exposure time: 56 d Bioconcentration factor (BCF): 2,551 Partition coefficient: n-octanol/water : log Pow: 5.1 (20 °C)

12.4 Mobility in soil

Product: Mobility : Remarks: No data available Distribution among environmental compartments : Remarks: No data available

No data available regarding mobility in soil.

12.5 Results of PBT and vPvB assessment

Product: Assessment : This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher. Components: O,O,O-triphenyl phosphorothioate: Assessment : PBT substance Substance is not very persistent and very bioaccumulative (vPvB).

The product contains no PBT/vPvB components at >= 0.1%. O,O,O-triphenyl phosphorothioate is assessed as a PBT substance but not vPvB.

12.6 Other adverse effects

Endocrine disrupting potential : This substance/mixture does not contain components considered to have endocrine disrupting properties for environment according to UK REACH Article 57(f).

The substance/mixture does not contain components considered to have endocrine disrupting properties for environment according to UK REACH Article 57(f).

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Dispose of as hazardous waste in compliance with local and national regulations.

Waste Codes

13 02 06* synthetic engine, gear and lubricating oils EWC
15 01 10* packaging containing residues of or contaminated by hazardous substances EWC
14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for OKS 3760?

The signal word is no signal word.

What is the physical form of OKS 3760?

OKS 3760 is a liquid with yellow color. It has characteristic odor.

What is OKS 3760 used for?

Lubricating oil

What are the hazard statements for OKS 3760?

This substance has 1 hazard statement:

  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of OKS 3760?

The melting point is No data available and the boiling point is No data available.