Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- OKS 2731
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Auxiliary
Uses advised against
Restricted to professional users.
Manufacturers & Suppliers
OKS Spezialschmierstoffe GmbH
manufacturer
Ganghoferstr. 47, D-82216 Maisach-Gernlinden
+49 8142 3051 500
Emergency Contacts
Emergency Contact
+49 8142 3051 517
24/7 service
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If signs/symptoms continue, get medical attention. Keep patient warm and at rest. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. If breathing is irregular or stopped, administer artificial respiration.
Symptoms: Unconsciousness, Dizziness, Drowsiness, Headache, Nausea, Tiredness
Remove contaminated clothing. If irritation develops, get medical attention. Wash off with soap and plenty of water. Wash clothing before reuse. Thoroughly clean shoes before reuse.
Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes. If eye irritation persists, consult a specialist.
Move the victim to fresh air. Keep respiratory tract clear. Do NOT induce vomiting. Rinse mouth with water.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
ABC powder
High volume water jet
Fire Hazard. Contains gas under pressure; may explode if heated. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.
Standard procedure for chemical fires. Cool containers/tanks with water spray.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate personnel to safe areas. Ensure adequate ventilation. Remove all sources of ignition. Refer to protective measures listed in sections 7 and 8. Only qualified personnel equipped with suitable protective equipment may intervene.
Try to prevent the material from entering drains or water courses. Prevent further leakage or spillage if safe to do so.
collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite) and place in container for disposal according to local / national regulations (see section 13). Keep in suitable, closed containers for disposal.
Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not use in areas without adequate ventilation. Do not breathe vapours or spray mist. In case of insufficient ventilation, wear suitable respiratory equipment. Avoid contact with skin and eyes. For personal protection see section 8. Keep away from fire, sparks and heated surfaces. Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product. Do not ingest. Do not use sparking tools. These safety instructions also apply to empty packaging which may still contain product residues. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 °C. Do not pierce or burn, even after use.
Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 °C.
Wash face, hands and any exposed skin thoroughly after handling.
Keep away from fire, sparks and heated surfaces. Do not use sparking tools.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use only in an area equipped with explosion proof exhaust ventilation. Handle only in a place equipped with local exhaust (or other appropriate exhaust).
Material : Nitrile rubber; Break through time : > 10 min; Protective index : Class 1; Remarks : For prolonged or repeated contact use protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case.
Safety glasses with side-shields
Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines. Recommended Filter type: Organic gas and low boiling vapour type (AX)
Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
No hazards to be specially mentioned.
No dangerous reaction known under conditions of normal use.
Heat, flames and sparks. Strong sunlight for prolonged periods. Risk of receptacle bursting.
Oxidizing agents
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1950
- Shipping Name
- AEROSOLS
- Transport Class
- 2
- Packing Group
- Not assigned by regulation
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for OKS 2731?
The signal word is danger.
What is the physical form of OKS 2731?
OKS 2731 is a aerosol appearing as aerosol with colourless color. It has characteristic odor.
What is OKS 2731 used for?
Auxiliary
What are the hazard statements for OKS 2731?
This substance has 2 hazard statements:
- H222: Extremely flammable aerosol.
- H229: Pressureed container: May burst if heated.
What is the melting point of OKS 2731?
The melting point is No data available and the boiling point is -161 °C (1,013 hPa).