Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CAST BOOSTERS
- Synonyms
- DYNO® CORD SENSITIVE BOOSTERS - CS35, CS45, CS90, CS135, TROJAN® SPARTAN®, TROJAN® SPARTAN® Slider, TROJAN® Stinger, TROJAN® NB, TROJAN® NB UNIVERSAL, TROJAN® Twinplex, TROJAN® SPARTAN® SR, TROJAN® SPARTAN® Cone, TROJAN® Ringprime, TROJAN® SPARTAN® CSU, TROJAN® WB, TROJAN® SHIELD™
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Explosive product. Commercial blasting applications.
Manufacturers & Suppliers
Dyno Nobel Inc.
manufacturer
6440 S. Millrock Drive, Suite 150 Salt Lake City, Utah 84121
801-364-4800
http://www.dynonobel.com
Emergency Contacts
CHEMTREC
1-800-424-9300
CHEMTREC
+01 703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS01
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| pentaerythritol tetranitrate (PETN) EC: 201-084-3 | 78-11-5 | --- | Yes |
| 2,4,6-trinitrotoluene (TNT) EC: 204-289-6 | 118-96-7 | --- | Yes |
| aluminum metal | 7429-90-5 | --- | Yes |
| perhydro-1,3,5-trinitro-1,3,5-triazine (RDX) EC: 204-500-1 | 121-82-4 | --- | Yes |
| octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX) EC: 220-260-0 | 2691-41-0 | --- | Yes |
For the wording of the listed risk phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Wash with soap and water. If skin irritation is experienced, consult a doctor.
Symptoms: Generally the product does not irritate the skin.
Remove contact lenses if worn. Rinse opened eye for several minutes under running water.
Do not induce vomiting; call for medical help immediately.
Immediate Medical Attention
Call for medical help immediately if swallowed.
Medical Treatment
Product may produce physical injury if mishandled. Treatment of these injuries should be based on the blast and compression effects.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Can explode or detonate under fire conditions. Burning material may produce toxic vapors. Explosive; mass explosion hazard.
DO NOT fight fire when fire reaches explosives.
Firefighter Protection
Wear self-contained respiratory protective device. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate area. Isolate area and prevent access.
No special measures required.
Pick up mechanically.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Open and handle receptacle with care. Handle with care. Avoid jolting, friction and impact. Do not subject to grinding/shock/friction. Prevent impact and friction.
Store in a cool location. Keep away from heat.
Keep ignition sources away - Do not smoke. Protect from heat. Emergency cooling must be available in case of nearby fire.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Wear gloves for the protection against mechanical hazards according to NIOSH or EN 388. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of Gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material cannot be calculated in advance and has therefore to be checked prior to the application. Penetration Time of Glove Material: The exact break through time must be found out by the manufacturer of the protective gloves and has to be observed.
Safety glasses Face protection
Not required under normal conditions of use. Respiratory protection may be required after product use.
Impervious protective clothing
No further relevant information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used and stored according to specifications.
Danger of explosion. Toxic fumes may be released if heated above the decomposition point.
Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
No further relevant information available.
Carbon monoxide and carbon dioxide, Nitrogen oxides, Hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
The substance is toxic to aquatic organisms.
12.2 Persistence and Degradability
No further relevant information available.
12.3 Bioaccumulative Potential
No further relevant information available.
12.1 Toxicity
The substance is classified as toxic for fish and aquatic organisms.
12.4 Mobility in Soil
No further relevant information available.
12.5 Results of PBT and vPvB Assessment
The substance is not considered to be PBT or vPvB.
12.6 Other Adverse Effects
No further relevant information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system. Damaged materials pose a danger to anyone in the immediate area; consult experts for disposal of damaged products.
The user of this material has the responsibility to dispose of unused material, residues and containers in compliance with all relevant local, state and federal laws and regulations regarding treatment, storage and disposal for hazardous and nonhazardous wastes. Residual materials should be treated as hazardous.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN0042
- Shipping Name
- Boosters, without detonator
- Transport Class
- 1.1
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, Health and Environmental Regulations/Legislation Specific for the Substance or Mixture United States (USA) and Canada.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is CAST BOOSTERS known by?
CAST BOOSTERS is also known as: DYNO® CORD SENSITIVE BOOSTERS - CS35, CS45, CS90, CS135, TROJAN® SPARTAN®, TROJAN® SPARTAN® Slider, TROJAN® Stinger, TROJAN® NB, TROJAN® NB UNIVERSAL, TROJAN® Twinplex, TROJAN® SPARTAN® SR, TROJAN® SPARTAN® Cone, TROJAN® Ringprime, TROJAN® SPARTAN® CSU, TROJAN® WB, TROJAN® SHIELD™
What is the hazard signal word for CAST BOOSTERS?
The signal word is danger.
What is the physical form of CAST BOOSTERS?
CAST BOOSTERS is a solid with according to product specification color. It has odourless odor.
What is CAST BOOSTERS used for?
Explosive product. Commercial blasting applications.
What are the hazard statements for CAST BOOSTERS?
This substance has 1 hazard statement:
- H201: Explosive; mass explosion hazard.
What is the melting point of CAST BOOSTERS?
The melting point is 80 °C (176 °F) (trinitrotoluene) and the boiling point is Undetermined..