Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- CETCO® TC BOOSTER
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
CETCO, an MTI Company
manufacturer
2870 Forbs Avenue Hoffman Estates, IL 60192 United States
800 527-9948
http://www.cetco.com/
Emergency Contacts
Emergency
+1 215 207 0061
Americas
+1 215 207 0061
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| GRAPHITE | 7782-42-5 | 90 - 100% | No |
| QUARTZ | 14808-60-7 | 0.1 - 10% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Call a physician if symptoms develop or persist.
Wash off with soap and water. Get medical attention if irritation develops and persists.
Rinse with water. Get medical attention if irritation develops and persists.
Rinse mouth. If vomiting occurs, keep head low so that stomach content doesn't get into the lungs. Get medical advice/attention if you feel unwell.
Immediate Medical Attention
Keep victim warm. Symptoms may be delayed.
Medical Treatment
Provide general supportive measures and treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).
Do not use water jet as an extinguisher, as this will spread the fire.
During fire, gases hazardous to health may be formed.
Use water spray to cool unopened containers.
Firefighter Protection
Self-contained breathing apparatus and full protective clothing must be worn in case of fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear appropriate protective equipment and clothing during clean-up. Ensure adequate ventilation.
Shovel or sweep up. Avoid dust formation. Clean surface thoroughly to remove residual contamination. Put material in suitable, covered, labeled containers.
Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Shovel up and place in a container for salvage or disposal. Avoid dust formation. Clean surface thoroughly to remove residual contamination.
Avoid discharge into drains, water courses or onto the ground.
Shovel up and place in a container for salvage or disposal. Clean surface thoroughly to remove residual contamination.
Related Products
Similar products with comparable safety profiles
251041 250041 Booster C
UFI: W4HQ-D2UP-A00F-4FJK
254041 253041 Booster EVO C
UFI: W4HQ-D2UP-A00F-4FJK
HiTEC® 11500 Performance Additive
---
HiTEC® 11500 Performance Additive
UFI: VN97-U3ES-6Y66-XTJ7
HiTEC® 61055 Performance Additive
UFI: FSK8-GRE2-2777-8XC6
HiTEC® 6666 Performance Additive
UFI: JXXF-UF1A-XU31-HYM3
HiTEC® 672 Performance Additive
UFI: VWQJ-SFMY-6005-2DSP
HiTEC® 340 Performance Additive
UFI: FFRA-A9AQ-HT21-VCP5
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Do not handle until all safety precautions have been read and understood. Keep formation of airborne dusts to a minimum. Provide appropriate exhaust ventilation at places where dust is formed. Do not breathe dust. Do not taste or swallow. Avoid prolonged exposure. When using, do not eat, drink or smoke. Should be handled in closed systems, if possible. Wear appropriate personal protective equipment. Wash hands thoroughly after handling. Observe good industrial hygiene practices.
Store in original tightly closed container. Keep out of the reach of children. Store away from incompatible materials (see Section 10 of the SDS).
When using, do not eat, drink or smoke. Wash hands thoroughly after handling. Observe good industrial hygiene practices.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
The product is stable and non-reactive under normal conditions of use, storage and transport.
No dangerous reaction known under conditions of normal use.
Contact with incompatible materials. Avoid dust formation. Avoid heat, sparks, open flames and other ignition sources.
Powerful oxidizers. Chlorine.
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for CETCO® TC BOOSTER?
The signal word is danger.
What is the physical form of CETCO® TC BOOSTER?
CETCO® TC BOOSTER is a solid. with silver. grey. or black. color. It has not available. odor.
What are the hazard statements for CETCO® TC BOOSTER?
This substance has 3 hazard statements:
- H302: Harmful if swallowed.
- H350: May cause cancer.
- H372: Causes damage to organs through prolonged or repeated exposure.
What is the melting point of CETCO® TC BOOSTER?
The melting point is Not available. and the boiling point is Not available..