NextSDS Logo
Safety Data Sheet EN

Dykem® Remover & Prep

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Dykem® Remover & Prep
Product Code
82638, 82738, 82838, 82938
Synonyms
FORMULA CODE(S): * 8947

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Remover and cleaner

Uses advised against

None known.

Manufacturers & Suppliers

I

ITW Pro Brands

manufacturer

805 E. Old 56 Highway, Olathe, KS 66061

+1 800-443-9536

Emergency Contacts

Infotrac

1-800-535-5053

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Flam. Liq. Cat. 2
Eye Irrit. Cat. 2A
STOT SE Cat. 3

GHS Pictograms

GHS02 - Flammable

GHS02

GHS07 - Health hazard

GHS07

Hazard Statements

H225 Highly flammable liquid and vapor.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

Precautionary Statements

P210 Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
P233 Keep container tightly closed.
P233 Keep container tightly closed.
P235 Keep cool.
P240 Ground/bond container and receiving equipment.
P241 Use explosion-proof electrical/ventilating/lighting equipment.
P242 Use only non-sparking tools.
P243 Take precautionary measures against static discharge.
P261 Avoid breathing mist or vapor.
P264 Wash thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
P280 Wear protective gloves/eye protection/face protection.
P303 + P361 + P353 If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 If inhaled: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338 If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312 Call a poison center/doctor if you feel unwell.
P337 + P313 If eye irritation persists: Get medical advice/attention.
P370 + P378 In case of fire: Use appropriate media to extinguish.
P403 Store in a well-ventilated place.
P405 Store locked up.
P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Acetone 67-64-1 60 - 70% No
Ethanol 64-17-5 30 - 40% No
Isopropanol 67-63-0 1 - 5% No
N-Propyl acetate 109-60-4 1 - 5% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove victim to fresh air and keep at rest in a position comfortable for breathing. Call a POISON CENTER or doctor/physician if you feel unwell.

Symptoms: Coughing.

Skin contact

Take off immediately all contaminated clothing. Rinse skin with water/shower. Get medical attention if irritation develops and persists.

Eye contact

Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention if irritation develops and persists.

Symptoms: Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision.

Ingestion

Rinse mouth. Get medical attention if symptoms occur.

Symptoms: Nausea, vomiting.

Immediate Medical Attention

Get medical attention if irritation develops and persists. Call an ambulance for thermal burns.

Medical Treatment

Provide general supportive measures and treat symptomatically. Thermal burns: Flush with water immediately. While flushing, remove clothes which do not adhere to affected area. Call an ambulance. Continue flushing during transport to hospital.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water fog. Alcohol resistant foam. Dry chemical powder. Carbon dioxide (CO2).

Unsuitable media

Do not use water jet as an extinguisher, as this will spread the fire.

Specific hazards

Vapors may form explosive mixtures with air. Vapors may travel considerable distance to a source of ignition and flash back. During fire, gases hazardous to health may be formed.

Instructions

In case of fire and/or explosion do not breathe fumes. Move containers from fire area if you can do so without risk.

Firefighter Protection

Self-contained breathing apparatus and full protective clothing must be worn in case of fire.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Eliminate all ignition sources (no smoking, flares, sparks, or flames in immediate area). Wear appropriate protective equipment and clothing during clean-up. Avoid breathing mist or vapor. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ventilate closed spaces before entering them.

Small spill

Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal. Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.

Large spill

Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Use a non-combustible material like vermiculite, sand or earth to soak up the product and place into a container for later disposal. Following product recovery, flush area with water.

Environmental

This material is classified as a water pollutant under the Clean Water Act and should be prevented from contaminating soil or from entering sewage and drainage systems which lead to waterways.

Cleanup methods

Absorb with earth, sand or other non-combustible material and transfer to containers for later disposal. Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination.

Materials: earth, sand or other non-combustible material, cloth, fleece

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Do not handle, store or open near an open flame, sources of heat or sources of ignition. Protect material from direct sunlight. When using do not smoke. Avoid breathing mist or vapor. Avoid contact with eyes. Avoid prolonged exposure. Wear appropriate personal protective equipment.

Storage

Store locked up. Keep away from heat, sparks and open flame. Prevent electrostatic charge build-up by using common bonding and grounding techniques. Store in a cool, dry place out of direct sunlight. Store in original tightly closed container. Store in a well-ventilated place. Keep in an area equipped with sprinklers. Store away from incompatible materials (see Section 10 of the SDS).

Hygiene

Observe good industrial hygiene practices.

Fire prevention

Do not handle, store or open near an open flame, sources of heat or sources of ignition. When using do not smoke.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
Liquid.
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
Clear.
Colour
Clear.
Colour Intensity
---
Form
Liquid.
Odor
Solvent.
Odor Threshold
Not available.
Ph
Not available.
Melting Point
Not available.
Boiling Point
132.98 °F (56.1 °C)
Flash Point
133.0 °F (56.1 °C) Tag Closed Cup
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
> 1 (BuAc = 1)
Vapor Pressure
Not available.
Vapor Density
> 1 (air = 1)
Relative Density
0.79 @ 21.1°C
Bulk Density
---
Density
---
Flammability
Not applicable.
Upper Explosive Limit
21.2 %
Lower Explosive Limit
1.7 %
Explosive Limits
---
Auto Ignition Temperature
Not available.
Decomposition Temperature
Not available.
Solubility
---
Partition Coefficient
Not available.
Solubility In Water
Completely soluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
36.23 % ; 287 g/l
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Material is stable under normal conditions.

Reactivity

The product is stable and non-reactive under normal conditions of use, storage and transport.

Hazardous reactions

Hazardous polymerization does not occur.

Avoid

Avoid heat, sparks, open flames and other ignition sources. Avoid temperatures exceeding the flash point. Contact with incompatible materials.

Incompatible

Acids. Strong oxidizing agents.

Decomposition

Carbon oxides.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1 Toxicity

Aquatic Crustacea EC50 Water flea (Daphnia magna) 10294 - 17704 mg/l, 48 hours Fish LC50 Rainbow trout, donaldson trout (Oncorhynchus mykiss) 4740 - 6330 mg/l, 96 hours

12.1 Toxicity

Ethanol (CAS 64-17-5) Aquatic Crustacea EC50 Water flea (Daphnia magna) 7.7 - 11.2 mg/l, 48 hours Fish LC50 Fathead minnow (Pimephales promelas) > 100 mg/l, 96 hours

12.1 Toxicity

Aquatic: Fish, LC50, Bluegill (Lepomis macrochirus), > 1400 mg/l, 96 hours

12.2 Persistence and degradability

No data available

12.3 Bioaccumulative potential

No data available

12.4 Mobility in soil

No data available

12.5 Results of PBT and vPvB assessment

No data available

12.6 Endocrine disrupting properties

No data available

12.7 Other adverse effects

No data available

12.1 Toxicity

N-Propyl acetate (CAS 109-60-4) Aquatic Fish LC50 Fathead minnow (Pimephales promelas) 56 - 64 mg/l, 96 hours

Persistence and degradability

No data is available on the degradability of any ingredients in the mixture.

No data is available on the degradability of any ingredients in the mixture.

Bioaccumulative potential

Partition coefficient n-octanol / water (log Kow)

12.3 Bioaccumulative potential

Partition coefficient n-octanol / water (log Kow) Acetone -0.24

12.3 Bioaccumulative potential

Partition coefficient n-octanol / water (log Kow) Ethanol -0.31

12.3 Bioaccumulative potential

Partition coefficient n-octanol / water (log Kow): 0.05

12.3 Bioaccumulative potential

Partition coefficient n-octanol / water (log Kow) N-Propyl acetate 1.23

Mobility in soil

No data available.

Other adverse effects

The product contains volatile organic compounds which have a photochemical ozone creation potential.

The product contains volatile organic compounds which have a photochemical ozone creation potential.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Collect and reclaim or dispose in sealed containers at licensed waste disposal site.

Disposal

Dispose of in accordance with local regulations. This material and its container must be disposed of in a safe manner.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
UN1263
Shipping Name
Paint related material
Transport Class
3
Packing Group
II
IMDG

Read safety instructions, SDS and emergency procedures before handling.

IATA

Read safety instructions, SDS and emergency procedures before handling.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What other names is Dykem® Remover & Prep known by?

Dykem® Remover & Prep is also known as: FORMULA CODE(S): * 8947

What is the hazard signal word for Dykem® Remover & Prep?

The signal word is danger.

What is the physical form of Dykem® Remover & Prep?

Dykem® Remover & Prep is a liquid. appearing as clear. with clear. color. It has solvent. odor.

What is Dykem® Remover & Prep used for?

Remover and cleaner

What are the hazard statements for Dykem® Remover & Prep?

This substance has 3 hazard statements:

  • H225: Highly flammable liquid and vapor.
  • H319: Causes serious eye irritation.
  • H336: May cause drowsiness or dizziness.

What is the melting point of Dykem® Remover & Prep?

The melting point is Not available. and the boiling point is 132.98 °F (56.1 °C).