NextSDS Logo
Safety Data Sheet EN

BONDERITE C-IC 2595 ACID CLEANER known as POLYPREP CLEANER 2595

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
BONDERITE C-IC 2595 ACID CLEANER known as POLYPREP CLEANER 2595
Product Code
1449032

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Cleaners for Automobile

Uses advised against

None identified

Manufacturers & Suppliers

Henkel Corporation logo

Henkel Corporation

manufacturer

One Henkel Way, Rocky Hill, Connecticut 06067

+1 (860) 571-5100

www.henkelna.com

Emergency Contacts

Poison Control Center

1-877-671-4608

Poison Control Center

1-303-592-1711

CHEMTREC

1-800-424-9300

CHEMTREC

1-703-527-3887

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Skin Irrit. Cat. 2
Eye Dam. Cat. 1

GHS Pictograms

GHS05 - Corrosive

GHS05

Hazard Statements

H315 CAUSES SKIN IRRITATION.
H318 CAUSES SERIOUS EYE DAMAGE.

Precautionary Statements

P264 Wash affected area thoroughly after handling.
P280 Wear protective gloves, eye protection, and face protection.
P302 + P352 IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313 If skin irritation occurs: Get medical attention.
P362 + P364 Take off contaminated clothing and wash it before reuse.

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Monoammonium phosphate 7722-76-1 10 - 30% Yes
Sodium p-cumenesulphonate 15763-76-5 1 - 5% Yes
Surfactant --- 1 - 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove person immediately to fresh air. Seek medical attention if symptoms develop or persist.

Skin contact

Flush with large amounts of water. If symptoms develop and persist, get medical attention.

Eye contact

Rinse immediately with plenty of water and seek medical advice.

Ingestion

Immediately contact a physician or poison control center. DO NOT induce vomiting unless directed to do so by medical personnel.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use media appropriate for surrounding material.

Unsuitable media

Not available.

Specific hazards

Not available.

Instructions

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

Firefighter Protection

Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.

Environmental

Prevent further leakage or spillage if safe to do so.

Cleanup methods

Absorb spill with inert material. Shovel material into appropriate container for disposal.

Materials: inert material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid contact with eyes, skin and clothing. Avoid breathing vapors or mists of this product. Provide adequate ventilation. Wash thoroughly after handling. Do not take internally.

Storage

Store between 40 °F and 90 °F. If stored outside of this range, mix well before using.

Hygiene

Wash thoroughly after handling.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide local and general exhaust ventilation to effectively remove and prevent buildup of any vapors or mists generated from the handling of this product.

Hands

Chemical resistant, impermeable gloves.

Eyes

Wear safety glasses; chemical goggles (if splashing is possible).

Respiratory

If ventilation is not sufficient to effectively prevent buildup of aerosols, mists or vapors, appropriate NIOSH/MSHA respiratory protection must be provided.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Flash Point
Aqueous solution
Form
---
Boiling Point
>100 °C (>212°F)
Explosive Limits
---
Vapor Density
---
Relative Evaporation Rate
---
Solidification Point
---
Upper Explosive Limit
Not applicable
Solubility In Fat
---
Softening Point
---
Molecular Weight
---
Solubility
Completely soluble Water Aqueous solution
Colour Intensity
---
Ph
3.9 - 4.3
Physical State Data
liquid
Colour
Colourless / Colorless
Dynamic Viscosity
Not available.
Decomposition Temperature
Not available.
Crystallisation Point
---
Physical State
Liquid
Cloud Point
---
Flammability
Not applicable
State Under Standard Conditions
---
Odor
Mild
Solubility In Water
---
Density
---
Melting Point
Not available.
Freezing Point
---
Kinematic Viscosity
Not available.
Voc Content
0 % Estimated
Partition Coefficient
Not available.
Metal Corrosion
---
Vapor Pressure
Not applicable
Bulk Density
---
Relative Density
1.058 - 1.088
Appearance
---
Evaporation Rate
Not available.
Auto Ignition Temperature
Not available.
Lower Explosive Limit
Not applicable
Properties Status
---
Odor Threshold
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable at normal conditions.

Reactivity

Not available.

Hazardous reactions

None under normal processing.

Avoid

Store away from incompatible materials.

Incompatible

This product may react with strong acids or oxidizing agents.

Decomposition

Upon decomposition, this product may yield sulfur dioxide, carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons. Decomposition of this product may yield ammonia gas.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for BONDERITE C-IC 2595 ACID CLEANER known as POLYPREP CLEANER 2595?

The signal word is danger.

What is the physical form of BONDERITE C-IC 2595 ACID CLEANER known as POLYPREP CLEANER 2595?

BONDERITE C-IC 2595 ACID CLEANER known as POLYPREP CLEANER 2595 is a liquid with colourless / colorless color. It has mild odor.

What is the solubility of BONDERITE C-IC 2595 ACID CLEANER known as POLYPREP CLEANER 2595?

Completely soluble Water Aqueous solution

What is BONDERITE C-IC 2595 ACID CLEANER known as POLYPREP CLEANER 2595 used for?

Cleaners for Automobile

What are the hazard statements for BONDERITE C-IC 2595 ACID CLEANER known as POLYPREP CLEANER 2595?

This substance has 2 hazard statements:

  • H315: CAUSES SKIN IRRITATION.
  • H318: CAUSES SERIOUS EYE DAMAGE.

What is the melting point of BONDERITE C-IC 2595 ACID CLEANER known as POLYPREP CLEANER 2595?

The melting point is Not available. and the boiling point is >100 °C (>212°F).