NextSDS Logo
Safety Data Sheet EN

PETRONAS URANIA ELITE LONG DRAIN 10W-40

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
PETRONAS URANIA ELITE LONG DRAIN 10W-40
Product Code
88004

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Engine oil.

Uses advised against

This product should not be used for other purposes than those specified without the advice of an expert.

Manufacturers & Suppliers

P

PETRONAS LUBRICANTS ITALY S.P.A.

manufacturer

VIA SANTENA 1, 10029 VILLASTELLONE (TORINO)

+39.01196131

Emergency Contacts

EMERGENCY ANSWER SERVICE

+44 1235 239670

24H/7D

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Aquatic Chronic Cat. 3

GHS Pictograms

Hazard Statements

H412 Harmful to aquatic life with long lasting effects.

Precautionary Statements

P273 Avoid release to the environment.
P501 Dispose of contents/container in accordance with local, regional, national, international regulation.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Distillates, petroleum, hydrotreated heavy paraffinic EC: 265-157-1 64742-54-7 10 - 12.5% Yes
Reaction products of benzenesulfonic acid, mono-C20-24 (even)-sec-alkyl derivs. para-, calcium salts EC: 947-519-7 --- 0.5 - 0.95% Yes
2,6-di-tert-butylphenol EC: 204-884-0 128-39-2 0.1 - 0.25% Yes
Reaction mass of 1H-Benzotriazole-1-methanamine, N,N-bis(2-ethylhexyl)-6-methyl- and 2H-Benzotriazole-2-methanamine, N,N-bis(2-ethylhexyl)-5-methyl- and N,N-bis(2-ethylhexyl)-4-methyl-1H-benzotriazole-1-methylamine and 2H-Benzotriazole-2-methanamine, N,N-bis(2-ethylhexyl)-4-methyl- and N,N-bis(2-ethylhexyl)-5-methyl-1H-benzotriazole-1-methylamine EC: 939-700-4 --- --- Yes
O,O,O-triphenyl phosphorothioate EC: 209-909-9 597-82-0 0.01 - 0.05% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Expose affected person to fresh air and obtain medical attention if necessary.

Skin contact

Wash with plenty of water and soap. Remove contaminated clothes and shoes and rinse thoroughly with plenty of water and soap.

Eye contact

Rinse thoroughly with plenty of water for at least 10 minutes keeping eyelids open. Remove contact lenses if this can be done easily. In case of contact with hot product, rinse thoroughly with plenty of water to dissipate heat.

Symptoms: Pain and redness.

Ingestion

Wash out thoroughly the mouth with water. Do not induce vomiting to avoid aspiration into the respiratory tracts.

Immediate Medical Attention

Obtain medical attention in case of development and persistence of pain and redness. Obtain immediate medical attention to assess eye conditions and the correct treatment to be practiced. Obtain immediate medical attention (ingestion). Obtain medical attention if necessary (inhalation).

Medical Treatment

Refer to section 4.1.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam, carbon dioxide, dry chemical powder, water mist, water.

Unsuitable media

None in particular. Avoid high pressure water jet.

Specific hazards

Containers may explode if involved in fire.

Instructions

Cool down with water the containers don't get involved in fire to avoid their possible explosion. Use water jet only to cool down surfaces exposed to fire.

Firefighter Protection

Use suitable breathing apparatus.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

For non emergency personnel: Avoid ingestion of product. Avoid contact with skin and eyes by wearing appropriate protective clothing. Avoid to breathe fumes and aerosols. Surfaces on which the product has been spilled may become slippery. Wear personal protection equipment. Remove persons to safety. See protective measures under point 7 and 8. For emergency responders: Wear personal protection equipment.

Small spill

Contain small spills with absorbent material.

Large spill

In case of large spills dike, absorb and shovel up into suitable containers for disposal.

Environmental

Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.

Cleanup methods

Put dirty material in suitable container. Wash with plenty of water.

Materials: absorbing material, organic, sand

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid ingestion. Avoid frequent and prolonged skin contact and contact with eyes. Provide adequate ventilation to avoid mist or aereosol. Don't smoke or use spare flames; avoid contact with spark or other sources of ignition. Don't work near open container to avoid high concentration of vapours. Don't eat or drink during use. Avoid contact with skin and eyes, inhalation of vapours and mists. Don't use empty container before they have been cleaned. Before making transfer operations, assure that there aren't any incompatible material residuals in the containers.

Storage

Store under cover in the original container securely closed away from heat and sources of ignition. Do not store in the open air. Keep out of reach of children and away from food and drink.

Hygiene

Contaminated clothing should be changed before entering eating areas. Do not eat or drink while working.

Fire prevention

Don't smoke or use spare flames; avoid contact with spark or other sources of ignition.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Avoid production and diffusion of mist and aerosol with utilization of localized ventilation/aspiration or other required precautions.

Hands

Wear suitable gloves (i.e. neoprene, nitrile). Gloves should be changed when they show wear. The kind of gloves and the term of use must be decided from employer with regard to processing and to allow for DPI legislation and glove producer's indications. Wear gloves only with clean hands.

Eyes

Chemical goggles and face shield in case of oil splashes.

Respiratory

None required under normal conditions of use. Use approved full face respirator with organic vapour filter cartridge if the recommended exposure limits are exceeded.

Skin/Body

Wear suitable protective clothing (for further information, refer to CEN-EN 14605); change it immediately in case of large contamination and wash it before subsequent use.

Environmental

Adopt all required precaution to avoid product immission in environment (e.g., blasting systems, catch basins, ...). Refer to technical precautions and also to sections 6.2, 6.3, 7.2, 12 and 13.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
LIQUID
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
VISCOUS AMBER
Colour
AMBER
Colour Intensity
---
Form
---
Odor
NOT RELEVANT
Odor Threshold
NOT RELEVANT
Ph
N.A.
Melting Point
N.A.
Boiling Point
>300 °C (572 °F)
Flash Point
192.5 °C (378.5 °F) (ASTM D93)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
---
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
0.8659 g/cm3
Flammability
N.A.
Upper Explosive Limit
N.A.
Lower Explosive Limit
N.A.
Explosive Limits
---
Auto Ignition Temperature
N.A.
Decomposition Temperature
N.A.
Solubility
---
Partition Coefficient
N.A.
Solubility In Water
IMMISCIBLE
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
93.41 cSt
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable under normal conditions of use.

Reactivity

Read carefully all information provided in other sections of heading 10.

Hazardous reactions

Not expected under normal conditions of use.

Avoid

This product must be kept far from heat sources. In any case, avoid exposing product to temperatures above the flash point.

Incompatible

Strong oxidizing agents, hard acids and bases.

Decomposition

Oxides of carbon, compounds of sulphur, phosphorus, nitrogen and hydrogen sulfide.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. TOXICITY

List of Eco-Toxicological properties of the components Distillates, petroleum, hydrotreated heavy paraffinic CAS: 64742- a) Aquatic acute toxicity: LC50 Fish Pimephales promelas > 100 mg/L 96h 54-7 b) Aquatic chronic toxicity: NOELR Oncorhynchus mykiss >= 1000 mg/L b) Aquatic chronic toxicity: NOEC Fish > 1 mg/L b) Aquatic chronic toxicity: NOEC Daphnia > 1 mg/L - water flea

12.1. TOXICITY

List of Eco-Toxicological properties of the components Reaction mass of 1H-Benzotriazole-1-methanamine, N,N-bis(2-ethylhexyl)-6-methyl- and 2H-Benzotriazole-2-methanamine, N,N-bis(2-ethylhexyl)-5-methyl- and N,N-bis(2-ethylhexyl)-4-methyl-1H-benzotriazole-1-methylamine and 2H-Benzotriazole-2-methanamine, N,N-bis(2-ethylhexyl)-4-methyl- and N,N-bis(2-ethylhexyl)-5-methyl-1H-benzotriazole-1-methylamine CAS: a) Aquatic acute toxicity: EC50 Algae = 0.976 mg/L 72h Confidential b) Aquatic chronic toxicity: NOEC Algae = 0.658 mg/L 72h

12.2. PERSISTENCE AND DEGRADABILITY

Data on biodegradability of product are not available.

12.3. BIOACCUMULATIVE POTENTIAL

Not available.

12.4. MOBILITY IN SOIL

As the dispersion in the environment may result in contamination of environmental matrix (soil, subsoil, surface water and groundwater), do not release in the environment.

12.5. RESULTS OF PBT AND VPVB ASSESSMENT

vPvB substances: None - PBT substances: None No PBT or vPvB substances present in concentration >= 0.1%

No PBT or vPvB substances present in concentration >= 0.1%.

12.6. ENDOCRINE DISRUPTING PROPERTIES

No endocrine disruptors present at concentrations >= 0.1%

No endocrine disruptors present at concentrations >= 0.1%

12.7 OTHER ADVERSE EFFECTS

No effect known.

No effect known.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Recover if possible. In so doing, comply with the local and national regulations currently in force.

Disposal

Dispose in accordance with local or national regulations via authorised person/licensed waste disposal contractor.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

Safety, health and environmental regulations/legislation specific for the substance or mixture including REACH, CLP, and national implementations of EU directives.

Chemical Safety Assessment Not performed
?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for PETRONAS URANIA ELITE LONG DRAIN 10W-40?

The signal word is no signal word.

What is the physical form of PETRONAS URANIA ELITE LONG DRAIN 10W-40?

PETRONAS URANIA ELITE LONG DRAIN 10W-40 is a liquid appearing as viscous amber with amber color. It has not relevant odor.

What is PETRONAS URANIA ELITE LONG DRAIN 10W-40 used for?

Engine oil.

What are the hazard statements for PETRONAS URANIA ELITE LONG DRAIN 10W-40?

This substance has 1 hazard statement:

  • H412: Harmful to aquatic life with long lasting effects.

What is the melting point of PETRONAS URANIA ELITE LONG DRAIN 10W-40?

The melting point is N.A. and the boiling point is >300 °C (572 °F).