Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Elmer's No-Wrinkle Rubber Cement
- Synonyms
- E141; E904; 231, 232, 233, 234, 61518; E63231T; E425; E1539, 60818
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive
Uses advised against
None known.
Manufacturers & Suppliers
Newell Office Brands
manufacturer
6655 Peachtree Dunwoody Rd. NE, Atlanta, GA 30328
1.888.435.6377
http://www.elmers.com
Emergency Contacts
Emergency Contact
1.888.516.2502
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
GHS09
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| n-Heptane | 142-82-5 | 85% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Call a POISON CENTER or doctor if you feel unwell.
Symptoms: respiratory irritation
Remove/take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation occurs: Get medical advice/attention. Wash contaminated clothing before reuse.
Symptoms: skin irritation
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention.
Symptoms: eye irritation
Immediately call a POISON CENTER or doctor/physician. DO NOT induce vomiting. Aspiration hazard. If vomiting occurs, keep head lower than hips to help prevent aspiration.
Symptoms: Aspiration into the lungs may result in pulmonary edema and pneumonitis.
Immediate Medical Attention
Immediately call a POISON CENTER or doctor/physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Dry chemical, foam or carbon dioxide, water.
None known.
Highly flammable liquid and vapor. The vapor is heavier than air. Vapors or gases may ignite at distant ignition sources and flash back. Vapor/air mixtures are explosive.
Move container from fire area if it can be done without risk. Cool containers with water spray until well after the fire is out. Do not scatter spilled material with high-pressure water streams. In case of fire and/or explosion do not breathe fumes. Stay upwind and keep out of low areas.
Firefighter Protection
Wear self-contained breathing apparatus with a full facepiece and protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Keep unnecessary people away, isolate hazard area and deny entry. Do not breath gas/vapor/spray. Avoid contact with eyes and skin. Stop leak if possible without personal risk. Stay upwind and keep out of low areas.
Dike for later disposal
Prevent entry into waterways, sewers, basements, or confined areas. Avoid release to the environment. Collect spillage.
Absorb with earth, sand or other non-combustible material and transfer to container.
Materials: earth, sand or other non-combustible material
Related Products
Similar products with comparable safety profiles
Rubber Cement
---
Elmer's Carpenter's Wood Glue
---
3M Scotch-Weld(TM) Plastic & Rubber Instant Adhesive PR20
---
Loctite Super Glue Precision Pen
---
Rubber Base Solvent
---
Loctite Brush-on Super Glue
---
Weldwood Multi Purpose Spray Adhesive
---
Weldwood Original Contact Cement
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with eyes and skin. Do not breathe dust/fume/gas/mist/vapors/spray. Use only with adequate ventilation. Wash thoroughly after handling. Do not eat, drink or smoke when using this product. Avoid heat, flames, sparks and other sources of ignition. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Take precautionary measures against static discharge. Use only non-sparking tools. Use only outdoors or in a well-ventilated area. Wear protective gloves/protective clothing/eye protection/face protection.
Store in a well-ventilated place. Keep container tightly closed. Keep cool. Store locked up.
Wash thoroughly after handling. Do not eat, drink or smoke when using this product.
Avoid heat, flames, sparks and other sources of ignition. Ground/bond container and receiving equipment. Use explosion-proof electrical/ventilating/lighting equipment. Take precautionary measures against static discharge. Use only non-sparking tools.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of use.
No hazard expected.
Hazardous polymerization will not occur.
Avoid heat, flames, sparks and other sources of ignition. Containers may rupture or explode if exposed to heat.
acids. bases, amines, oxidizing materials.
oxides of carbon.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose in accordance with all applicable regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1133
- Shipping Name
- ADHESIVES
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Elmer's No-Wrinkle Rubber Cement known by?
Elmer's No-Wrinkle Rubber Cement is also known as: E141; E904; 231, 232, 233, 234, 61518; E63231T; E425; E1539, 60818
What is the hazard signal word for Elmer's No-Wrinkle Rubber Cement?
The signal word is danger.
What is the physical form of Elmer's No-Wrinkle Rubber Cement?
Elmer's No-Wrinkle Rubber Cement is a liquid appearing as opaque liquid with not available color. It has mild odor, ,solvent odor odor.
What is Elmer's No-Wrinkle Rubber Cement used for?
Adhesive
What are the hazard statements for Elmer's No-Wrinkle Rubber Cement?
This substance has 8 hazard statements:
- H225: Highly flammable liquid and vapor.
- H304: May be fatal if swallowed and enters airways.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H335: May cause respiratory irritation.
- H336: May cause drowsiness or dizziness.
- H372: May cause damage to organs through prolonged or repeated exposure.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of Elmer's No-Wrinkle Rubber Cement?
The melting point is Not available and the boiling point is 90 °C.