Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- MOBIL POLYREX EM
- Product Code
- 2015A020G010
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Grease
Manufacturers & Suppliers
Imperial Oil Downstream
national supplier
P.O. Box 2480, Station M Calgary, ALBERTA T2P 3M9 Canada
1-800-567-3776
Emergency Contacts
Emergency Contact
1-866-232-9563
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1H-IMIDAZOLE-1-ETHANOL, 2-(8-HEPTADECENYL)-4,5-DIHYDRO- | 95-38-5 | 0.1 - 0.25% | Yes |
| ALCOHOLS, C7-9-ISO-, C8-RICH, REACTION PRODUCTS WITH PHOSPHORUS OXIDE, COMPDS. WITH C12-14-TERT-ALKYL AMINES | 124018-37-7 | 1 - 2.5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Wash contact areas with soap and water.
Flush thoroughly with water.
Symptoms: irritation
First aid is normally not required.
Symptoms: discomfort
Immediate Medical Attention
If product is injected into or under the skin, or into any part of the body, regardless of the appearance of the wound or its size, the individual should be evaluated immediately by a physician as a surgical emergency. If irritation occurs, get medical assistance. Seek medical attention if discomfort occurs.
Medical Treatment
Early surgical treatment within the first few hours may significantly reduce the ultimate extent of injury.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.
Straight streams of water
Evacuate area. Prevent run-off from fire control or dilution from entering streams, sewers or drinking water supply. Use water spray to cool fire exposed surfaces and to protect personnel.
Firefighter Protection
Fire-fighters should use standard protective equipment and in enclosed spaces, self-contained breathing apparatus (SCBA).
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Scrape up spilled material with shovels into a suitable container for recycle or disposal.
Full body suit of chemical resistant, antistatic material is recommended.
Prevent entry into waterways, sewers, basements or confined areas.
Scrape up spilled material with shovels into a suitable container for recycle or disposal. Skim from surface (water).
Materials: shovels, suitable container, booms
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent small spills and leakage to avoid slip hazard.
Do not store in open or unlabelled containers.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special requirements under ordinary conditions of use and with adequate ventilation.
No protection is ordinarily required under normal conditions of use.
If contact is likely, safety glasses with side shields are recommended.
If engineering controls do not maintain airborne contaminant concentrations at a level which is adequate to protect worker health, an approved respirator may be appropriate. No protection is ordinarily required under normal conditions of use and with adequate ventilation. For high airborne concentrations, use an approved supplied-air respirator, operated in positive pressure mode. Supplied air respirators with an escape bottle may be appropriate when oxygen levels are inadequate, gas/vapour warning properties are poor, or if air purifying filter capacity/rating may be exceeded.
No skin protection is ordinarily required under normal conditions of use. In accordance with good industrial hygiene practices, precautions should be taken to avoid skin contact.
Comply with applicable environmental regulations limiting discharge to air, water and soil. Protect the environment by applying appropriate control measures to prevent or limit emissions.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Material is stable under normal conditions.
Hazardous polymerization will not occur.
Excessive heat. High energy sources of ignition.
Strong oxidizers
Material does not decompose at ambient temperatures.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
MOBILITY
PERSISTENCE AND DEGRADABILITY
BIOACCUMULATION POTENTIAL
Has the potential to bioaccumulate, however metabolism or physical properties may reduce the bioconcentration or limit bioavailability.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Product is suitable for burning in an enclosed controlled burner for fuel value or disposal by supervised incineration at very high temperatures to prevent formation of undesirable combustion products.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
CEPA: All components of this product are either on the Domestic Substance List (DSL) or are exempt.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for MOBIL POLYREX EM?
The signal word is no signal word.
What is the physical form of MOBIL POLYREX EM?
MOBIL POLYREX EM is a solid with blue color. It has characteristic odor.
What is MOBIL POLYREX EM used for?
Grease
What is the melting point of MOBIL POLYREX EM?
The melting point is >250°C (482°F) and the boiling point is >330°C (626°F).