NextSDS Logo
Safety Data Sheet EN

HOCUT™ 795-H

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
HOCUT™ 795-H
Product Code
202374-01

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Metalworking fluid

Uses advised against

Any other purpose.

Manufacturers & Suppliers

Quaker Houghton PA, Inc. logo

Quaker Houghton PA, Inc.

manufacturer

901 E. Hector Street Conshohocken, PA 19428 USA

610-832-4000

http://www.quakerhoughton.com

Wallover Oil Company logo

Wallover Oil Company

distributor

21845 Drake Road Strongsville, OH 44149 USA

(440) 238-9250

http://www.wallover.com

Emergency Contacts

CHEMTREC

1-800-424-9300

24 hours

CHEMTREC

1-703-527-3887

24 hours

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

Skin Irrit. Cat. 2
Eye Irrit. Cat. 2A
Skin Sens. Cat. 1

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.

Precautionary Statements

P261 Avoid breathing vapor.
P264 Wash thoroughly after handling.
P282 Wear eye or face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P337 + P313 If eye irritation persists: Get medical advice or attention.
P352 IF ON SKIN: Wash with plenty of water.
P362 + P364 Take off contaminated clothing and wash it before reuse.
P363 Wash contaminated clothing before reuse.
P501 Dispose of contents and container in accordance with all local, regional, national and international regulations.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Mineral oil --- 50 - 75% No
1-aminopropan-2-ol 78-96-6 10% No
Amine neutralized carboxylic Acid --- 5% No
Amine neutralized dicarboxylic Acid --- 3% No
Alcohols, C12-15, ethoxylated 68131-39-5 3% No
Amine neutralized carboxylic Acid --- 3% No
Amine neutralized carboxylic Acid --- 2.3% No
1,2-benzisothiazol-3(2H)-one 2634-33-5 0.1% No

May contain: 64742-52-5,64742-53-6 The mineral oils in the product contain < 3% DMSO extract (IP 346).

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move affected person to fresh air. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. Get medical attention.

Symptoms: Not expected under normal use.

Skin contact

Wash with plenty of soap and water. Remove contaminated clothing and wash it before reuse. Get medical attention if symptoms occur.

Symptoms: pain or irritation, redness, skin rash or hives

Eye contact

Flush with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Remove contact lenses, if present and easy to do. Get medical attention if symptoms occur.

Symptoms: pain or irritation, redness, watering

Ingestion

Do not induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to an unconscious person.

Symptoms: gastrointestinal irritation and diarrhea

Immediate Medical Attention

Get medical attention. In case of inhalation of decomposition products in a fire, symptoms may be delayed.

Medical Treatment

No specific treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use an extinguishing agent suitable for the surrounding fire. Use dry chemical, CO₂, water spray (fog) or foam.

Unsuitable media

Do not use water jet.

Specific hazards

In a fire or if heated, a pressure increase will occur and the container may burst.

Instructions

Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire. No action shall be taken involving any personal risk or without suitable training.

Firefighter Protection

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

No action shall be taken involving any personal risk or without suitable training. Put on appropriate personal protective equipment (see Section 8). Keep unnecessary personnel away. Avoid breathing vapor or mist. Provide adequate ventilation. Evacuate area.

Small spill

Stop leak if without risk. Move containers from spill area. Prevent entry into sewers, water courses, basements or confined areas. Absorb with an inert material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Large spill

Stop leak if without risk. Move containers from spill area. For large spills, dike spilled material or otherwise contain it to ensure runoff does not reach a waterway. Absorb with an inert material and place in an appropriate waste disposal container. Dispose of via a licensed waste disposal contractor.

Environmental

Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Do not allow any potentially contaminated water, including rain water, runoff from fire fighting or spills, to enter any waterway, sewer or drain.

Cleanup methods

Absorb with an inert material and place in an appropriate waste disposal container.

Materials: inert material

—

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Put on appropriate personal protective equipment (see Section 8). Do not get in eyes or on skin or clothing. Do not breathe vapor or mist. Do not ingest.

Storage

Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.

Hygiene

Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
Liquid.
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
Hazy
Colour Intensity
---
Form
---
Odor
Characteristic.
Odor Threshold
Not available.
Ph
10.2 [Conc. (% w/w): 5%]
Melting Point
Not available.
Boiling Point
Not available.
Flash Point
Not available.
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not available.
Vapor Pressure
Not available.
Vapor Density
Not available.
Relative Density
0.942
Bulk Density
---
Density
---
Flammability
Not available.
Upper Explosive Limit
Not available.
Lower Explosive Limit
Not available.
Explosive Limits
---
Auto Ignition Temperature
Not available.
Decomposition Temperature
Not available.
Solubility
Emulsifies.
Partition Coefficient
Not available.
Solubility In Water
Not available.
Solubility In Fat
---
Molecular Weight
---
Voc Content
142 g/l
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
Kinematic (40°C (104°F)): >0.206 cm²/s (>20.6 cSt)
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable.

Reactivity

No specific test data related to reactivity available for this product or its ingredients.

Hazardous reactions

Under normal conditions of storage and use, hazardous reactions will not occur.

Avoid

No specific measures identified.

Incompatible

Strong oxidizing materials. strong acids. strong alkalis

Decomposition

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Toxicity

This material is toxic to aquatic life. This material is harmful to aquatic life with long lasting effects.

Toxicity

1-aminopropan-2-ol | Acute EC50 32.7 mg/l | Algae - Scenedesmus subspicatus | 72 hours | Acute EC50 108.82 mg/l | Daphnia - Daphnia magna | 48 hours | Acute LC50 210 mg/l Fresh water | Fish - Carassius auratus | 96 hours

Toxicity

Product/ingredient name | Result | Species | Exposure Alcohols, C12-15, ethoxylated | Acute EC50 0.7 mg/l Fresh water | Algae - Pseudokirchneriella subcapitata | 96 hours | Acute EC50 0.39 mg/l Fresh water | Crustaceans - Ceriodaphnia dubia - Neonate | 48 hours | Acute EC50 302 μg/l Fresh water | Daphnia - Daphnia magna - Neonate | 48 hours | Acute LC50 1400 μg/l Fresh water | Fish - Pimephales promelas | 96 hours | Chronic NOEC 1 mg/l Fresh water | Algae - Pseudokirchneriella subcapitata | 96 hours | Chronic NOEC 83 μg/l Fresh water | Daphnia - Daphnia magna - Neonate | 21 days

Toxicity

Product/ingredient name | Result | Species | Exposure | 1,2-benzisothiazol-3(2H)-one | Acute EC50 0.11 mg/l | Algae - Selenastrum capricornutum | 72 hours | | | Acute EC50 97 ppb Fresh water | Daphnia - Daphnia magna | 48 hours | | | Acute LC50 10 to 20 mg/l Fresh water | Crustaceans - Ceriodaphnia dubia | 48 hours | | | Acute LC50 167 ppb Fresh water | Fish - Oncorhynchus mykiss | 96 hours |

Bioaccumulative potential

| Product/ingredient name | LogPow | BCF | Potential | | 1-aminopropan-2-ol | -0.96 | 0.11 | low |

Bioaccumulative potential

| Product/ingredient name | LogPow | BCF | Potential | | Alcohols, C12-15, ethoxylated | 2.03 to 6.24 | - | high |

Mobility in soil

Soil/water partition coefficient (Koc) : Not available.

Other adverse effects

No known significant effects or critical hazards.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Dispose of surplus and non-recyclable products via a licensed waste disposal contractor.

Disposal

Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

ADR

Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

IMDG

Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

IATA

Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for HOCUT™ 795-H?

The signal word is warning.

What is the physical form of HOCUT™ 795-H?

HOCUT™ 795-H is a liquid. with hazy color. It has characteristic. odor.

What is the solubility of HOCUT™ 795-H?

Emulsifies.

What is HOCUT™ 795-H used for?

Metalworking fluid

What are the hazard statements for HOCUT™ 795-H?

This substance has 3 hazard statements:

  • H315: Causes skin irritation.
  • H317: May cause an allergic skin reaction.
  • H319: Causes serious eye irritation.

What is the melting point of HOCUT™ 795-H?

The melting point is Not available. and the boiling point is Not available..