NextSDS Logo
Safety Data Sheet EN

OPTISLIP™ ER-BE-(HU)

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
OPTISLIP™ ER-BE-(HU)

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Polymer additive

Manufacturers & Suppliers

C

Cargill Incorporated

manufacturer

15407 McGinty Rd W Wayzata, MN 55391

1-800-227-4455

Emergency Contacts

VelocityEHS

1-800-255-3924

VelocityEHS

+1-813-248-0585

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Notes

No hazardous ingredients

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

If inhaled, remove to fresh air. If symptoms persist, call a physician.

Skin contact

Get medical attention if irritation develops and persists. Wash off with soap and plenty of water.

Eye contact

If easy to do, remove contact lens, if worn. Protect unharmed eye.

Ingestion

Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.

Unsuitable media

Do NOT use water jet.

Specific hazards

Burning produces irritant fumes.

Instructions

In the event of fire and/or explosion do not breathe fumes.

Firefighter Protection

Wear self-contained breathing apparatus for firefighting if necessary.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Environmental

Local authorities should be advised if significant spillages cannot be contained. If the product contaminates rivers and lakes or drains inform respective authorities.

—

Related Products

Similar products with comparable safety profiles

L

LUBRISYN(TM) 110

UFI: 22D7-K28R-V006-NRK4

L

LUBRISYN™ 110

---

O

Optiphen™ DLP

---

E

EROLCID®

---

R

RHODIBLOC FL-AE

---

G

GEROPON SS OIP

---

D

DOSBOND™ LT

---

V

VORALUX™ HL 500 Polyol

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Wear personal protective equipment. Do not get in eyes or mouth or on skin. Use only with adequate ventilation.

Storage

Store in original container.

Hygiene

Do not get in eyes or mouth or on skin.

Fire prevention

Avoid spark promoters. Ground/bond container and equipment. These alone may be insufficient to remove static electricity.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Maintain air concentrations below occupational exposure standards.

Eyes

Safety glasses

Respiratory

No personal respiratory protective equipment normally required.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Language Code
---
Physical State
solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Beads
Colour
off-white
Colour Intensity
---
Form
---
Odor
fatty odour
Odor Threshold
No data available
Ph
Not applicable
Melting Point
172 - 178 °F / 78 - 81 °C
Boiling Point
Decomposes below the boiling point.
Flash Point
ca. 466 °F / 241 °C (1,013 hPa)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
< 0.000001 hPa (77 °F / 25 °C)
Vapor Density
---
Relative Density
0.908 (68 °F / 20 °C)
Bulk Density
---
Density
0.925 g/cm3 (77 °F / 25 °C)
Flammability
The product is not flammable.
Upper Explosive Limit
---
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
log Pow: ca. 8
Solubility In Water
< 0.738 µg/l insoluble
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
Not applicable
Kinematic Viscosity
Not applicable
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under normal conditions.

Reactivity

No dangerous reaction known under conditions of normal use.

Hazardous reactions

Stable under recommended storage conditions.

Avoid

No data available

Incompatible

Strong oxidizing agents

Decomposition

No data available

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

Ecotoxicity

Toxicity to fish (Chronic toxicity) : NOEC (Danio rerio (zebra fish)): > 0.105 mg/l Exposure time: 28 d Test Type: flow-through test GLP: yes Remarks: No toxicity at the limit of solubility

Toxicity

Toxicity to fish : Remarks: No data available

12.1 Toxicity

Toxicity to daphnia and other aquatic invertebrates : EC50 (Daphnia magna (Water flea)): > 0.13 mg/l Exposure time: 48 h Test Type: static test Method: OECD Test Guideline 202 GLP: yes Remarks: No toxicity at the limit of solubility Toxicity to algae/aquatic plants : ErC50 (Raphidocelis subcapitata (freshwater green alga)): 0.05 mg/l End point: Growth rate Exposure time: 72 h Test Type: static test Method: OECD Test Guideline 201 GLP: yes Remarks: No toxicity at the limit of solubility

12.1 Toxicity

Toxicity to daphnia and other aquatic invertebrates (Chronic toxicity) : NOEC (Daphnia magna (Water flea)): > 0.077 mg/l End point: reproduction rate Exposure time: 21 d Test Type: semi-static test GLP: yes Remarks: No toxicity at the limit of solubility

12.1 Toxicity

Acute aquatic toxicity : No toxicity at the limit of solubility Chronic aquatic toxicity : This product has no known ecotoxicological effects.

No toxicity at the limit of solubility for acute aquatic toxicity; no known ecotoxicological effects for chronic aquatic toxicity.

Persistence and degradability

Biodegradability : Result: Readily biodegradable. Biodegradation: 64 % Exposure time: 28 d Method: OECD Test Guideline 301B GLP: yes

Other adverse effects

Ozone-Depletion Potential : Regulation: 40 CFR Protection of Environment; Part 82 Protection of Stratospheric Ozone - CAA Section 602 Class I Substances Remarks: This product neither contains, nor was manufactured with a Class I or Class II ODS as defined by the U.S. Clean Air Act Section 602 (40 CFR 82, Subpt. A, App.A + B).

The product does not contain, nor was it manufactured with, Class I or Class II ozone-depleting substances as defined by the U.S. Clean Air Act.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Disposal

Dispose of in accordance with local regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for OPTISLIP™ ER-BE-(HU)?

The signal word is no signal word.

What is the physical form of OPTISLIP™ ER-BE-(HU)?

OPTISLIP™ ER-BE-(HU) is a solid appearing as beads with off-white color. It has fatty odour odor.

What is OPTISLIP™ ER-BE-(HU) used for?

Polymer additive

What is the melting point of OPTISLIP™ ER-BE-(HU)?

The melting point is 172 - 178 °F / 78 - 81 °C and the boiling point is Decomposes below the boiling point..