Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- EROLCID®
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Washing and cleaning products, Sanitary cleaner, corrosive, Process categories [PROC]: 8, 10, 11
Manufacturers & Suppliers
BUZIL-WERK Wagner GmbH & Co. KG
manufacturer
Fraunhofer Str. 17, D-87700 Memmingen
+49 (0) 8331 930-6
http://www.buzil.com
Emergency Contacts
Emergency Contact
+49 (0) 8331 / 930-730
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Phosphoric acid EC: 231-633-2 | 7664-38-2 | 20 - 25% | Yes |
| fatty alcohol polyethoxilate | 26183-52-8 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide fresh air.
After contact with skin, wash immediately with plenty of water and soap. Take off contaminated clothing and wash it before reuse.
Rinse immediately carefully and thoroughly with eye-bath or water.
Rinse mouth immediately and drink plenty of water. Do NOT induce vomiting.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet, alcohol resistant foam, Carbon dioxide, Extinguishing powder
Full water jet
Co-ordinate fire-fighting measures to the fire surroundings.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection equipment. Avoid contact with skin, eyes and clothes.
Do not allow to enter into surface water or drains. Do not allow to enter into soil/subsoil.
Absorb with liquid-binding material
Materials: sand, diatomaceous earth, acid- or universal binding agents
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothes. Do not mix with other chemicals. Wear personal protection equipment (refer to section 8). If extensively sprayed or used with high pressure equipment: Do not breathe gas/fumes/vapour/spray.
Keep container tightly closed.
When using do not eat, drink or smoke.
No special fire protection measures are necessary.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. Suitable material: NBR (Nitrile rubber). Breakthrough time (maximum wearing time) >480 min. A survey of suitable brands with detailed information on breakthrough times is available upon request.
Wear eye protection/face protection. (EN 166)
If extensively sprayed or used with high pressure equipment: combination filter A1/P2 (EN 143, EN 14387).
Wear suitable work clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under storage at normal ambient temperatures.
Exothermic reaction with: Alkali (lye)
Exothermic reaction with: Alkali (lye)
Alkali (lye)
No known hazardous decomposition products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN1805
- Shipping Name
- PHOSPHORIC ACID SOLUTION
- Transport Class
- 8
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for EROLCID®?
The signal word is danger.
What is the physical form of EROLCID®?
EROLCID® is a liquid .
What is EROLCID® used for?
Washing and cleaning products, Sanitary cleaner, corrosive, Process categories [PROC]: 8, 10, 11
What are the hazard statements for EROLCID®?
This substance has 2 hazard statements:
- H290: May be corrosive to metals.
- H314: Causes severe skin burns and eye damage.
What is the melting point of EROLCID®?
The melting point is approx. 0 °C and the boiling point is approx. 100 °C.