Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- SAG
- Product Code
- DX21210
- Chemical Name
- 3-chloro-N-[4-(methylamino)cyclohexyl]-N-[(3-pyridin-4-ylphenyl)methyl]-1-benzothiophene-2-carboxamide
- Synonyms
- Smoothened Agonist; 3-chloro-N-[trans-4-(methylamino)cyclohexyl]-N-[[3-(4-pyridinyl)phenyl]methyl]-benzo[b]thio phene-2-carboxamide;
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals
Uses advised against
No information available
Manufacturers & Suppliers
STEMCELL Technologies SARL
manufacturer
40 Rue des Berges, Miniparc Polytec, Bâtiment Sirocco, 38000 Grenoble, France
+33 (0) 4 76 04 75 30
STEMCELL Technologies Germany GmbH
manufacturer
Stolberger Str. 200, 50933, Köln, Germany
+33 (0) 4 76 04 75 30
STEMCELL Technologies UK Ltd.
manufacturer
Building 7100, Cambridge Research Park, Beach Drive, Waterbeach, Cambridge, UK, CB25 9TL
+33 (0) 4 76 04 75 30
Emergency Contacts
Emergency Contact
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS06
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 3-chloro-N-[4-(methylamino)cyclohexyl]-N-[(3-pyridin-4-ylphenyl)methyl]-1-benzothiophene-2-carboxamide | 912545-86-9 | 100% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air.
Wash skin with soap and water. In the case of skin irritation or allergic reactions see a physician.
Rinse thoroughly with plenty of water for at least 15 minutes, lifting lower and upper eyelids. Consult a physician.
Do NOT induce vomiting. Clean mouth with water and drink afterwards plenty of water. Never give anything by mouth to an unconscious person. Get medical attention.
Immediate Medical Attention
Consult a physician / Get medical attention.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
No information available.
No information available.
Firefighter Protection
Firefighters should wear self-contained breathing apparatus and full firefighting turnout gear. Use personal protection equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
See Section 12 for additional Ecological Information.
Take up mechanically, placing in appropriate containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure adequate ventilation.
Store in accordance with information listed on the Product Information Sheet (PIS).
Handle in accordance with good industrial hygiene and safety practice.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No special protective equipment required.
No protective equipment is needed under normal use conditions. If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required.
No special protective equipment required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended transport or storage conditions.
No information available.
None under normal processing.
None known based on information supplied.
Strong oxidizing agents.
Carbon dioxide (CO2). Carbon monoxide. Hydrogen sulfide. Nitrogen oxides (NOx). Phosgene.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
May cause long lasting harmful effects to aquatic life.
12.2. Persistence and degradability
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Endocrine disrupting properties
12.7. Other adverse effects
12.2. Persistence and degradability
No information available.
12.3. Bioaccumulative potential
No information available regarding bioaccumulation.
12.4. Mobility in soil
No information available.
12.5. Results of PBT and vPvB assessment
No information available.
12.6. Other adverse effects
No information available.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations. Dispose of waste in accordance with environmental legislation.
Dispose of in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2811
- Shipping Name
- TOXIC SOLID, ORGANIC, N.O.S. (SAG)
- Transport Class
- 6.1
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
This safety data sheet was created pursuant to the requirements of: Regulation (EC) No. 1907/2006 and Regulation (EC) No. 1272/2008. Take note of Directive 98/24/EC on the protection of the health and safety of workers from the risks related to chemical agents at work.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is SAG known by?
SAG is also known as: Smoothened Agonist; 3-chloro-N-[trans-4-(methylamino)cyclohexyl]-N-[[3-(4-pyridinyl)phenyl]methyl]-benzo[b]thio phene-2-carboxamide;
What is the hazard signal word for SAG?
The signal word is danger.
What is the physical form of SAG?
SAG is a solid appearing as crystalline with no information available color. It has no data available. odor.
What is the solubility of SAG?
DMF: 20 mg/mL; DMSO: 20 mg/mL; Ethanol: 20 mg/mL; Ethanol:PBS(pH 7.2) (1:1): 0.5 mg/mL
What is SAG used for?
Laboratory chemicals
What are the hazard statements for SAG?
This substance has 2 hazard statements:
- H301: Toxic if swallowed
- H413: May cause long lasting harmful effects to aquatic life
What is the melting point of SAG?
The melting point is No data available and the boiling point is No data available.