HPE buffer

Provide fresh air. If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions. In case of respiratory tract irritation, consult a physician.

Wash with plenty of soap and water. If skin irritation or rash occurs: Get medical advice/attention.

Irrigate copiously with clean, fresh water for at least 15 minutes, holding the eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER/doctor.

Rinse mouth with water (only if the person is conscious). Call a POISON CENTER or doctor if you feel unwell.

Dry extinguishing powder; Carbon dioxide (CO2)

Water jet.

During fire hazardous fumes/smoke could be produced.

Co-ordinate firefighting measures to the fire surroundings. Fight fire with normal precautions from a reasonable distance.

Remove persons to safety. Ventilate affected area.

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it.

Wipe up with absorbent material (e.g. cloth, fleece).

Materials: cloth, fleece

Use local and general ventilation. Use only in well-ventilated areas.

Protect against external exposure, such as High temperatures. Frost. UV-radiation/sunlight.

Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.

measures to prevent fire

General ventilation.

Wear suitable gloves. Check leak-tightness/impermeability prior to use. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. Chemical protection gloves are suitable, which are tested according to EN 374. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Type of material: PVC: polyvinyl chloride, CR: chloroprene (chlorobutadiene) rubber, Nitrile rubber. Material thickness: Use gloves with a minimum material thickness: ≥ 0,38 mm. Breakthrough times of the glove material: Use gloves with a minimum breakthrough times of the glove material: >480 minutes (permeation: level 6).

Use safety goggle with side protection (EN 166).

In case of inadequate ventilation wear respiratory protection. Type: ABEK-P2 (combined filters against gases, vapours and particles, colour code: Brown/Grey/Yellow/Green/White).

Protective clothing (EN 340 & EN ISO 13688).

Use appropriate container to avoid environmental contamination. Keep away from drains, surface and ground water.

See below 'Conditions to avoid'.

This material is not reactive under normal ambient conditions.

No known hazardous reactions.

There are no specific conditions known which have to be avoided.

Oxidisers.

Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.