Homogenization Buffer

Move victim to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.

Symptoms: May be harmful if inhaled. Causes respiratory tract irritation.

Wash off with soap and plenty of water.

Symptoms: May be harmful if absorbed through skin. Skin or eye contact may cause irritation, especially after prolonged contact.

Immediately flush with large quantities of water for at least fifteen minutes.

Symptoms: Skin or eye contact may cause irritation, especially after prolonged contact.

Wash out mouth with water if person is conscious. Do not give anything by mouth if victim is unconscious.

Symptoms: May be harmful if swallowed.

Use water spray, alcohol resistant foam, dry chemical or carbon dioxide.

Combustion products include carbon dioxide, carbon monoxide, and compounds of sodium, chlorine and nitrogen.

Wear self-contained breathing apparatus and protective clothing.

Avoid generating splashes/sprays mist. Ensure adequate ventilation. Evacuate person to safe areas.

Personnel who have received basic chemical safety training can generally handle small-scale releases.

Do not let product enter drains.

Wipe-up spilled material with polypad or other absorbent material.

Materials: polypad or other absorbent material

Avoid inhalation of vapors, mists and sprays. Avoid contact with skin or eyes. Employees must be appropriately trained to use this product safely as needed. Keep containers closed when not in use.

Store containers away from direct sunlight, sources of intense heat, or where freezing is possible.

Follow good chemical hygiene practices. Do not smoke, drink, eat, or apply cosmetics in the chemical use area. Remove contaminated clothing promptly.

Use in a well-ventilated laboratory.

Latex, nitrile or vinyl gloves.

Safety glasses or goggles.

None, if used according to directions. If concerned use respiratory mask.

Lab coat or apron.

Stable.

Not applicable.

Adverse storage conditions and incompatible materials.

Water-reactive materials.

Products of thermal decomposition include oxides of carbon, nitrogen, sodium, chloride.

Prepare, transport, treat, store, and dispose of waste product

Dispose of waste product according to all applicable local, U.S. State and U.S. Federal regulations, the applicable Canadian standards, or other appropriate national standards.