Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aryl Cyclohexylamines, Individual Compounds (≤1000 μg/mL), in Methanol I
- Product Code
- C9180.13, C10679.13, C9179.12, C12470.13, C13385.13, C13993.13, C15450.13, C15451.13, C13387.17
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory use Restricted to professional and industrial use.
Uses advised against
None known.
Manufacturers & Suppliers
Chiron AS
manufacturer
Arkitekt Ebbells veg 26, N-7041 TRONDHEIM
Emergency Contacts
poison information centre
113
24h service
Poison Center
+47 22 59 13 00
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS06
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| (S)-Desoxy-D2PM hydrochloride | 188398-87-0 | 0.2% | No |
| Methanol EC: 200-659-6 | 67-56-1 | 99.8% | Yes |
| (±)-Ketamine hydrochloride EC: 217-484-6 | 1867-66-9 | 0.2% | Yes |
| (±)-Ketamine-d4 hydrochloride (phenyl-d4) | 1246815-97-3 | 0.2% | Yes |
| (±)-Norketamine hydrochloride | 79499-59-5 | 0.2% | Yes |
| (±)-2F-Ketamine hydrochloride | 111982-49-1 | 0.2% | Yes |
| Deschloroketamine hydrochloride | 4631-27-0 | 0.2% | Yes |
| (±)-Ketamine-d3 hydrochloride (N-methyl-d3) | 1073254-49-5 | 0.2% | Yes |
| 3-fluoro Deschloroketamine hydrochloride | 2657761-24-3 | 0.2% | No |
| 4-fluoro Deschloroketamine hydrochloride | --- | 0.2% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Bring the injured person into fresh air. Make sure the injured person is continuously monitored. Prevent shock by keeping the injured person warm and calm. If breathing ceases, give mouth-to-mouth resuscitation. If unconscious, roll the injured person into recovery position. Call an ambulance.
Symptoms: breathing difficulties or irritation of the respiratory tract
Remove contaminated clothing and shoes immediately. Ensure to wash exposed skin thoroughly with water and soap. Skin cleanser can be used. If skin irritation occurs: Get medical advice/attention. For burns: Rinse with water until pain stops then continue to rinse for 30 minutes.
Symptoms: skin irritation
Flush eyes with water or saline water (20-30 °C) for at least 5 minutes. Remove contact lenses. Seek medical assistance and continue flushing during transport.
In the case of ingestion, contact a doctor immediately. If the person is conscious, give them water. DO NOT try to induce vomiting unless this is recommended by a doctor. Hold head facing down to prevent vomit from returning to the mouth and throat. Prevent shock by keeping the injured person warm and calm. Initiate immediate resuscitation if breathing stops. If unconscious, roll the injured person into recovery position. Call an ambulance.
Immediate Medical Attention
Contact a doctor or casualty department – take the label or this safety data sheet. Contact a doctor if in doubt about the injured person's condition or if the symptoms persist. In the case of ingestion, contact a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Alcohol-resistant foam, carbon dioxide, powder, water mist.
Waterjets should not be used, since they can spread the fire.
Highly flammable liquid and vapour. In use may form flammable/explosive vapour-air mixture. Fire will result in dense smoke. Exposure to combustion products may harm your health.
Firefighter Protection
Closed containers, which are exposed to fire, should be cooled with water.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Storages not yet ignited must be cooled by water mist. Remove flammable materials if conditions allow it. Ensure sufficient ventilation. Avoid direct contact with spilled substances. Ensure adequate ventilation, especially in confined areas. Avoid inhalation of vapours from spilled material. Contaminated areas may be slippery.
Avoid discharge to lakes, streams, sewers, etc.
Wherever possible cleaning should be performed with normal cleaning agents. Avoid use of solvents.
Related Products
Similar products with comparable safety profiles
Benzodiazepines, Individual Compounds (≤1000 μg/mL), in Methanol I
---
Tryptamines, Individual Compounds (≤1000 μg/mL), in Methanol
---
Cathinones, Individual Compounds (≤1000 μg/mL), in Methanol V
---
(±)-Methamphetamine (1.0 mg/ml) in Methanol
---
(-)-Mitragynine (≤ 1000 µg/mL), in Methanol
---
(±)-Amphetamine (1.0 mg/ml) in Methanol
---
Cyclohexylamine
CAS: 108-91-8
Cyclohexylamine
CAS: 108-91-8
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid direct contact with the product. Avoid contact during pregnancy and while nursing.
Must be stored in a cool and well-ventilated area, away from possible sources of ignition. Freezer, -18 to -24°C
Smoking, drinking and consumption of food is not allowed in the work area.
Ground and bond container and receiving equipment. Use non-sparking tools. Take action to prevent static discharges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The formation of vapours must be kept at a minimum and below current limit values (see above). Installation of a local exhaust system if normal air flow in the work room is not sufficient is recommended. Ensure eyewash and emergency showers are clearly marked.
In the event of prolonged exposure or high concentrations: Butyl, 0,7 mm, > 480 min, EN374-2, EN16523-1, EN388, EN421. When there is risk of splash-/ intermittent exposure: Fluoropolymer elastomer (e.g. Viton®), 0,7 mm, > 120 min, EN374-2, EN16523-1, EN388. Gloves, EN374.
Safety glasses with side shields. EN166
In case of inadequate ventilation: AX, Brown, EN14387
Dedicated work clothing should be worn.
Keep damming materials near the workplace. If possible, collect spillage during work.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under the conditions, noted in section 7 "Handling and storage".
No data available.
None known.
Avoid static electricity. Do not expose to any forms of heat (e.g. solar radiation). May lead to excess pressure.
Strong acids, strong bases, strong oxidizing agents, and strong reducing agents.
Under normal conditions of storage and use, hazardous decomposition products should not be produced.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
Readily biodegradable
12.3. Bioaccumulative potential
12.4. Mobility in soil
12.1. Toxicity
12.2. Persistence and degradability
12.5. Results of PBT and vPvB assessment
The mixture/product does not contain any substances known to fulfil the criteria for PBT and vPvB classification.
12.6. ▼ Endocrine disrupting properties
The mixture/product does not contain any substances considered to have endocrine-disrupting properties in relation to the environment.
12.7. Other adverse effects
No adverse effects known.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container to an approved waste disposal plant.
Dispose of contents/container to an approved waste disposal plant.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1230
- Shipping Name
- METHANOL
- Transport Class
- 3
- Packing Group
- II
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Restricted to professional users. People under the age of 18 and pregnant or breastfeeding women must not be exposed to this product.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Aryl Cyclohexylamines, Individual Compounds (≤1000 μg/mL), in Methanol I?
The signal word is danger.
What is the physical form of Aryl Cyclohexylamines, Individual Compounds (≤1000 μg/mL), in Methanol I?
Aryl Cyclohexylamines, Individual Compounds (≤1000 μg/mL), in Methanol I is a liquid with transparent color. It has sharp/pungent odor.
What is Aryl Cyclohexylamines, Individual Compounds (≤1000 μg/mL), in Methanol I used for?
Laboratory use Restricted to professional and industrial use.
What are the hazard statements for Aryl Cyclohexylamines, Individual Compounds (≤1000 μg/mL), in Methanol I?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H301 + H311 + H331: Toxic if swallowed, in contact with skin or if inhaled.
- H370: Causes damage to organs.
What is the melting point of Aryl Cyclohexylamines, Individual Compounds (≤1000 μg/mL), in Methanol I?
The melting point is -97.8 °C and the boiling point is 64.7 °C.