Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BMF CLEANER - 20 L
- Product Code
- 08931183
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- NF6F-N0MK-F00R-8RU7
Identified Uses
Professional use product Cleaning agent, Detergent
Uses advised against
Not applicable
Manufacturers & Suppliers
Adolf Wuerth GmbH & Co. KG
manufacturer
Reinhold-Würth-Str. 12-17 74653 Künzelsau
+49 794015 0
Emergency Contacts
Emergency Contact
+49 (0)6132 – 84463
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Poly(oxy-1,2-ethanediyl),alpha-(2-propylheptyl)-omega hydroxy | 160875-66-1 | 3 - 10% | Yes |
| Sodium cumenesulphonate EC: 248-983-7 | 28348-53-0 | 1 - 10% | Yes |
| Alcohols, C9-11-iso-, C10-rich, ethoxylated | 78330-20-8 | 1 - 3% | Yes |
| 1,2-Benzisothiazol-3(2H)-one EC: 220-120-9 | 2634-33-5 | 0.0025 - 0.025% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If inhaled, remove to fresh air. Get medical attention if symptoms occur.
Wash with water and soap as a precaution. Get medical attention if symptoms occur.
In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. If easy to do, remove contact lens, if worn. Get medical attention immediately.
Symptoms: Causes serious eye damage.
If swallowed, DO NOT induce vomiting. Get medical attention if symptoms occur. Rinse mouth thoroughly with water.
Immediate Medical Attention
Get medical attention immediately (for eye contact). Get medical attention if symptoms occur (for other routes).
Medical Treatment
Treat symptomatically and supportively.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Not applicable. Will not burn
Not applicable. Will not burn
Exposure to combustion products may be a hazard to health.
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Remove undamaged containers from fire area if it is safe to do so.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Follow safe handling advice (see section 7) and personal protective equipment recommendations (see section 8).
For large spills, provide dyking or other appropriate containment to keep material from spreading. If dyked material can be pumped, store recovered material in appropriate container.
Avoid release to the environment. Prevent further leakage or spillage if safe to do so. Prevent spreading over a wide area (e.g. by containment or oil barriers). Retain and dispose of contaminated wash water.
Soak up with inert absorbent material. Clean up remaining materials from spill with suitable absorbent.
Materials: inert absorbent material, suitable absorbent
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid inhalation of vapour or mist. Do not swallow. Do not get in eyes. Avoid prolonged or repeated contact with skin. Handle in accordance with good industrial hygiene and safety practice, based on the results of the workplace exposure assessment. Keep container tightly closed. Take care to prevent spills, waste and minimize release to the environment.
Keep in properly labelled containers. Keep tightly closed. Store in accordance with the particular national regulations.
If exposure to chemical is likely during typical use, provide eye flushing systems and safety showers close to the working place. When using do not eat, drink or smoke. Wash contaminated clothing before re-use.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure adequate ventilation, especially in confined areas. Minimize workplace exposure concentrations.
Material: Nitrile rubber; Break through time: > 480 min; Glove thickness: 0,5 mm. Choose gloves to protect hands against chemicals depending on the concentration and quantity of the hazardous substance and specific to place of work. For special applications, we recommend clarifying the resistance to chemicals of the aforementioned protective gloves with the glove manufacturer.
Chemical resistant goggles must be worn. If splashes are likely to occur, wear: Face-shield. Equipment should conform to DIN EN 166
If adequate local exhaust ventilation is not available or exposure assessment demonstrates exposures outside the recommended guidelines, use respiratory protection. Equipment should conform to DIN EN 14387. Filter type: Combined particulates and organic vapour type (A-P)
Select appropriate protective clothing based on chemical resistance data and an assessment of the local exposure potential. Skin contact must be avoided by using impervious protective clothing (gloves, aprons, boots, etc).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Not classified as a reactivity hazard.
None known.
None known.
Acids
No hazardous decomposition products are known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
Remarks: Based on data from similar materials
12.2 Persistence and degradability
Biodegradation: > 90 %
Exposure time: 28 d
Method: OECD Test Guideline 301B
Remarks: Based on data from similar materials
12.2 Persistence and degradability
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.5 Results of PBT and vPvB assessment
The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Endocrine disrupting properties
The substance/mixture does not contain components considered to have endocrine disrupting properties at levels of 0.1% or higher.
12.7 Other adverse effects
No data available
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations.
Dispose of in accordance with local regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for BMF CLEANER - 20 L?
The signal word is danger.
What is the physical form of BMF CLEANER - 20 L?
BMF CLEANER - 20 L is a liquid with yellow color. It has characteristic odor.
What is BMF CLEANER - 20 L used for?
Professional use product Cleaning agent, Detergent
What are the hazard statements for BMF CLEANER - 20 L?
This substance has 1 hazard statement:
- H318: Causes serious eye damage.
What is the melting point of BMF CLEANER - 20 L?
The melting point is No data available and the boiling point is 100 °C.