Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- GRF CLEANER PVC TI 125ML*20 L288
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Cleaning agent/ Cleaner
Manufacturers & Suppliers
Bison International
manufacturer
Dr.A.F.Philipsstraat 9, NL-4462 EW Goes, PO Box 160, NL-4460 AD Goes
+31 88 3235700
Emergency Contacts
National Poisons Information Centre
+353 (1) 809 2166
8.00 a.m. to 10.00 p.m. 7 days a week
National Poisons Information Centre
+353 (1) 809 2566
24 hour service
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Butanone EC: 201-159-0 | 78-93-3 | 50 - 100% | Yes |
For the wording of the listed hazard phrases refer to section 16.
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Generally the product does not irritate the skin.
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water haze, Alcohol resistant foam, Fire-extinguishing powder, Carbon dioxide
Water with full jet
No further relevant information available.
Cool endangered receptacles with water spray.
Firefighter Protection
No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Do not allow to enter sewers/ surface or ground water.
Send for recovery or disposal in suitable receptacles.
Related Products
Similar products with comparable safety profiles
GRF CLEANER PVC TI 1L*6 L58
CAS: 78-93-3
GRF CLEANER PVC TI 1L*6 L58
CAS: 78-93-3
GRF CLEANER PVC TI 1L*6 L58
CAS: 78-93-3
GRF CLEANER PVC TI 1L*6 L58
CAS: 78-93-3
GRF CLEANER PVC TI 1L*6 L058
CAS: 78-93-3
GRF LOCK SPRAY AE 150ML*12 L223
---
GRF HT-120 BO 500ML*12 L222
---
GRF PE CLNR HEAVY DUTY BO 1L*12 L105
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good interior ventilation, especially at floor level. (Fumes are heavier than air). Ensure good ventilation/exhaustion at the workplace. Prevent formation of aerosols. Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Store in a cool location. Keep container tightly sealed. Store in cool, dry conditions in well sealed receptacles.
Keep ignition sources away - Do not smoke. Protect against electrostatic charges.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Solvent resistant gloves. Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: Recommended thickness of the material: > 0,12 mm. Butyl rubber, BR. Nitrile rubber, NBR. Recommended thickness of the material: > 0,7 mm. Penetration time of glove material: For the mixture of chemicals mentioned below the penetration time has to be at least 10 minutes (Permeation according to EN 374 Part 3: Level 1). For the mixture of chemicals mentioned below the penetration time has to be at least 120 minutes (Permeation according to EN 374 Part 3: Level 4).
Tightly sealed goggles. Goggles recommended during refilling
Use suitable respiratory protective device in case of insufficient ventilation. Recommended filter device for short term use: Filter A
Solvent resistant protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No further relevant information available.
No further relevant information available.
Danger of forming toxic pyrolysis products.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
No further relevant information available regarding aquatic toxicity.
12.2 Persistence and degradability
No further relevant information available.
12.3 Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
12.6 Endocrine disrupting properties
For information on endocrine disrupting properties see section 11.
12.7 Other adverse effects
General notes regarding environmental protection: Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system. Disposal must be made according to official regulations.
Must not be disposed together with household garbage.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1193
- Shipping Name
- ETHYL METHYL KETONE (METHYL ETHYL KETONE)
- Transport Class
- 3
- Packing Group
- II
Warning: Flammable liquids.
Warning: Flammable liquids.
Warning: Flammable liquids.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for GRF CLEANER PVC TI 125ML*20 L288?
The signal word is danger.
What is the physical form of GRF CLEANER PVC TI 125ML*20 L288?
GRF CLEANER PVC TI 125ML*20 L288 is a liquid with colourless color. It has like ketone odor.
What is GRF CLEANER PVC TI 125ML*20 L288 used for?
Cleaning agent/ Cleaner
What are the hazard statements for GRF CLEANER PVC TI 125ML*20 L288?
This substance has 3 hazard statements:
- H225: Highly flammable liquid and vapour.
- H319: Causes serious eye irritation.
- H336: May cause drowsiness or dizziness.
What is the melting point of GRF CLEANER PVC TI 125ML*20 L288?
The melting point is -86.3 °C and the boiling point is 79-80.5 °C (78-93-3 Butanone).