MOLYBKOMBIN UMF Spray

Remove person to fresh air. Keep patient warm and at rest. If unconscious, place in recovery position and seek medical advice. Keep respiratory tract clear. If breathing is irregular or stopped, administer artificial respiration.

Symptoms: Unconsciousness, Dizziness, Drowsiness, Headache, Nausea, Tiredness.

Take off all contaminated clothing immediately. Wash off immediately with soap and plenty of water. Wash clothing before reuse. Thoroughly clean shoes before reuse.

Symptoms: Erythema.

Rinse immediately with plenty of water, also under the eyelids, for at least 10 minutes.

Move the victim to fresh air. Keep respiratory tract clear. Do NOT induce vomiting. Obtain medical attention. Rinse mouth with water.

Symptoms: Aspiration hazard if swallowed - can enter lungs and cause damage.

ABC powder

High volume water jet

Fire Hazard. Do not let product enter drains. Contains gas under pressure; may explode if heated. Beware of vapours accumulating to form explosive concentrations. Vapours can accumulate in low areas.

Standard procedure for chemical fires.

Evacuate personnel to safe areas. Ensure adequate ventilation. Remove all sources of ignition. Do not breathe vapours or spray mist. Refer to protective measures listed in sections 7 and 8.

Do not allow contact with soil, surface or ground water. Prevent further leakage or spillage if safe to do so.

Collect with non-combustible absorbent material and place in container for disposal according to local / national regulations (see section 13). Keep in suitable, closed containers for disposal.

Materials: non-combustible absorbent material (e.g. sand, earth, diatomaceous earth, vermiculite)

Do not use in areas without adequate ventilation. Do not breathe vapours or spray mist. In case of insufficient ventilation, wear suitable respiratory equipment. Avoid contact with skin and eyes. Keep away from fire, sparks and heated surfaces. Smoking, eating and drinking should be prohibited in the application area. Wash hands and face before breaks and immediately after handling the product. Do not get in eyes or mouth or on skin. Do not get on skin or clothing. Do not ingest. Do not use sparking tools. These safety instructions also apply to empty packaging which may still contain product residues. Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 °C. Do not pierce or burn, even after use.

Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50 °C.

Wash face, hands and any exposed skin thoroughly after handling.

Keep away from fire, sparks and heated surfaces. Do not use sparking tools.

Use only in an area equipped with explosion proof exhaust ventilation. Handle only in a place equipped with local exhaust (or other appropriate exhaust).

Material: Nitrile rubber; Break through time: > 10 min; Protective index: Class 1. Remarks: Wear protective gloves. The break through time depends amongst other things on the material, the thickness and the type of glove and therefore has to be measured for each case. The selected protective gloves have to satisfy the specifications of Regulation (EU) 2016/425 and the standard EN 374 derived from it.

Safety glasses with side-shields

Use respiratory protection unless adequate local exhaust ventilation is provided or exposure assessment demonstrates that exposures are within recommended exposure guidelines. Short term only. Filter type: Filter type A-P

Choose body protection in relation to its type, to the concentration and amount of dangerous substances, and to the specific work-place.

Stable under normal conditions.

No hazards to be specially mentioned.

No dangerous reaction known under conditions of normal use.

Heat, flames and sparks.

Oxidizing agents

No decomposition if stored and applied as directed.

Dispose of as hazardous waste in compliance with local and national regulations.

Do not dispose of with domestic refuse. Dispose of as hazardous waste in compliance with local and national regulations.