Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Advantage™ CS6801 Defoaming Agent
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Defoamer Industrial chemical
Manufacturers & Suppliers
Solenis
manufacturer
Pesetastraat 62, 2991 XT Barendrecht, Netherlands
Emergency Contacts
Emergency Contact
+1-302-502-0991
Emergency Contact
0 30-1 92 40
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 1,2-benzisothiazol-3(2H)-one EC: 220-120-9 | 2634-33-5 | 0.025 - 0.05% | Yes |
| mixture of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no.247-500-7] and 2-methyl-2H-isothiazol-3-one [EC no. 220-239-6] (3:1) | 55965-84-9 | 0.0002 - 0.0015% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If breathed in, move person into fresh air. If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.
First aid is not normally required. However, it is recommended that exposed areas be cleaned by washing with soap and water.
Remove contact lenses. Protect unharmed eye.
Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.
Immediate Medical Attention
If symptoms persist, call a physician.
Medical Treatment
No hazards which require special first aid measures.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. Water spray, Foam, Carbon dioxide (CO2), Dry chemical
Do not allow run-off from fire fighting to enter drains or water courses.
Standard procedure for chemical fires.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Persons not wearing protective equipment should be excluded from area of spill until clean-up has been completed. Comply with all applicable federal, state, and local regulations.
Prevent further leakage or spillage if safe to do so.
Keep in suitable, closed containers for disposal.
Related Products
Similar products with comparable safety profiles
Drewplus™ S4288 FOAM CONTROL AGENT
---
DEFOAMER 614
---
BONDERITE C-AD DEFOAMER 220 CLEANER ADDITIVE
---
Water Maze 5600 Defoamer
CAS: Mixture
BONDERITE C-AD DEFOAMER 220 LUBRICANT ADDITIVE
---
BONDERITE C-AD DEFOAMER CLEANER ADDITIVE known as PARCO DEFOAMER 2482
---
Nopcomaster™ ENA 2100 DEFOAMER
---
BONDERITE S-PD 2491 DEFOAMER ADDITIVE known as P3 DEFOAMER 2491
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Smoking, eating and drinking should be prohibited in the application area. For personal protection see section 8.
Electrical installations / working materials must comply with the technological safety standards.
General industrial hygiene practice.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
General room ventilation should be adequate for normal conditions of use. However, if unusual operating conditions exist, provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below exposure guidelines (if applicable) or below levels that cause known, suspected or apparent adverse effects.
Wear resistant gloves (consult your safety equipment supplier).
Not required under normal conditions of use. Wear splash-proof safety goggles if material could be misted or splashed into eyes.
No personal respiratory protective equipment normally required.
Wear as appropriate: Safety shoes
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No decomposition if stored and applied as directed.
Product will not undergo hazardous polymerization.
None known.
Strong oxidizing agents
Carbon monoxide, Carbon dioxide (CO2)
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
This product has no known ecotoxicological effects.
12.1 Toxicity
12.1 Toxicity
12.2 Persistence and degradability
12.2 Persistence and degradability
12.3 Bioaccumulative potential
The bioaccumulation potential cannot be determined.
12.3 Bioaccumulative potential
12.3 Bioaccumulative potential
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
12.6 Endocrine disrupting properties
The substance/mixture does not contain components considered to have endocrine disrupting properties at levels of 0.1% or higher.
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of in accordance with local regulations.
Dispose of in accordance with local regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Advantage™ CS6801 Defoaming Agent?
The signal word is no signal word.
What is the physical form of Advantage™ CS6801 Defoaming Agent?
Advantage™ CS6801 Defoaming Agent is a liquid with white, to, off-white color. It has no data available odor.
What is Advantage™ CS6801 Defoaming Agent used for?
Defoamer Industrial chemical