Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- BONDERITE C-AD DEFOAMER 220 CLEANER ADDITIVE
- Synonyms
- FOAM CONTROL 220
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Defoamer
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethylene glycol | 107-21-1 | 1 - 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If symptoms are experienced, remove source of contamination or move victim to fresh air. If symptoms develop and persist, get medical attention.
Immediately flush skin with plenty of water (using soap, if available). Obtain medical attention if irritation persists.
Immediately flush eyes with plenty of water for at least 15 minutes. Get medical attention.
If material is ingested, immediately contact a physician or poison control center. DO NOT induce vomiting unless directed to do so by medical personnel. Never give anything by mouth to a victim who is unconscious or is having convulsions.
Immediate Medical Attention
If symptoms develop and persist, get medical attention. Obtain medical attention if irritation persists. Get medical attention. Immediately contact a physician or poison control center.
Medical Treatment
This material, if aspirated into the lungs, may cause lipoid pneumonitis. Treat affected person appropriately. In the treatment of ethylene glycol overdose, ethanol competitively inhibits alcohol dehydrogenase (ADH) and prevents the formation of toxic metabolites. The affinity of ethylene glycol for ADH appears to be similar to ethanol. Ethanol should be administered only by qualified medical personnel.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Not available.
This product is combustible at high temperatures.
Wear full protective clothing. Wear self-contained breathing apparatus.
Firefighter Protection
Wear full protective clothing. Wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Prevent further leakage or spillage if safe to do so.
Absorb spill with inert material. Shovel material into appropriate container for disposal.
Materials: inert material
Related Products
Similar products with comparable safety profiles
BONDERITE C-AD DEFOAMER 220 LUBRICANT ADDITIVE
---
BONDERITE C-AD DEFOAMER CLEANER ADDITIVE known as PARCO DEFOAMER 2482
---
BONDERITE C-AD 166 CLEANER ADDITIVE
---
BONDERITE L-AD DEFOAMER LUBRICANT ADDITIVE ACHESON known as DTI DEFOAMER
---
BONDERITE S-PD 2491 DEFOAMER ADDITIVE known as P3 DEFOAMER 2491
---
BONDERITE M-AD 160 CLEANER ADDITIVE DR222KG
---
BONDERITE C-AD 142 SURFACTANT ADDITIVE
---
BONDERITE C-AD SC-78 BK SURFACTANT ADDITIVE
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wash thoroughly after handling. Do not take internally. For industrial use only.
Keep the container tightly closed and in a cool, well-ventilated place. Mix well before using.
Wash thoroughly after handling.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable at normal conditions.
This product reacts with acids.
Will not occur.
Keep away from heat, ignition sources and incompatible materials.
Oxidizing agents.
Upon decomposition, this product emits carbon monoxide, carbon dioxide and/or low molecular weight hydrocarbons.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is BONDERITE C-AD DEFOAMER 220 CLEANER ADDITIVE known by?
BONDERITE C-AD DEFOAMER 220 CLEANER ADDITIVE is also known as: FOAM CONTROL 220
What is the hazard signal word for BONDERITE C-AD DEFOAMER 220 CLEANER ADDITIVE?
The signal word is warning.
What is the physical form of BONDERITE C-AD DEFOAMER 220 CLEANER ADDITIVE?
BONDERITE C-AD DEFOAMER 220 CLEANER ADDITIVE is a liquid with white color. It has mild odor.
What is the solubility of BONDERITE C-AD DEFOAMER 220 CLEANER ADDITIVE?
Insoluble Water
What is BONDERITE C-AD DEFOAMER 220 CLEANER ADDITIVE used for?
Defoamer
What are the hazard statements for BONDERITE C-AD DEFOAMER 220 CLEANER ADDITIVE?
This substance has 1 hazard statement:
- H373: MAY CAUSE DAMAGE TO ORGANS THROUGH PROLONGED OR REPEATED EXPOSURE.
What is the melting point of BONDERITE C-AD DEFOAMER 220 CLEANER ADDITIVE?
The melting point is Not determined and the boiling point is > 250 °F (> 121.1 °C) calculated.