Cetamine G900

If breathing is irregular or stopped, immediately seek medical assistance and start first aid actions.

After contact with skin, take off immediately all contaminated clothing, and wash immediately with plenty of water. Immediately call a doctor.

Symptoms: Prolonged contact may cause dryness, redness, burns, blistering and ulceration.

Irrigate copiously with clean, fresh water for at least 10 minutes, holding the eyelids apart. Remove contact lenses, if present and easy to do. Continue rinsing. Call a physician immediately.

Symptoms: Splashes cause strong tearing, pain, may cause permanent visual impairment.

Rinse mouth with water (only if the person is conscious). Do NOT induce vomiting. Immediately call a doctor.

Symptoms: Ingestion causes pain, burns, abdominal pain, possible general impact (shock).

Water spray, Alcohol resistant foam, Fire extinguishing powder, Carbon dioxide (CO2)

Water jet

In case of fire and/or explosion do not breathe fumes.

Keep containers cool with water spray. Fight fire with normal precautions from a reasonable distance.

Remove persons to safety.

Keep away from drains, surface and ground water. Retain contaminated washing water and dispose of it. Chemicals generally shouldn't reach surface water.

Wipe up with absorbent material (e.g. cloth, fleece). Collect spillage.

Materials: cloth, fleece, sand, diatomaceous earth, acid binder, universal binder, sawdust

Keep away from sources of ignition - No smoking. Use only in well-ventilated areas. Do not mix with acids. Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.

Recommended storage temperature: 5 – 40 °C.

Wash hands after use. Do not eat, drink and smoke in work areas. Remove contaminated clothing and protective equipment before entering eating areas. Never keep food or drink in the vicinity of chemicals. Never place chemicals in containers that are normally used for food or drink. Keep away from food, drink and animal feedingstuffs.

Keep away from sources of ignition - No smoking.

Exhaust ventilation. If handled uncovered, arrangements with local exhaust ventilation have to be used.

Wear suitable gloves. Chemical protection gloves are suitable, which are tested according to EN 374. Check leak-tightness/impermeability prior to use. For special purposes, it is recommended to check the resistance to chemicals of the protective gloves mentioned above together with the supplier of these gloves. In case of spray contact at least protection index 2 recommended, according to more than 30 min. penetration time (EN 374). Layer thickness of gloves at least: 0.4 mm. In case of prolonged and intensive contact protection index 6 recommended, according to more than 480 min. penetration time (EN 374). Layer thickness of gloves at least: 0.7 mm. Type of material: PE: polyethylene, NBR: acrylonitrile-butadiene rubber, IIR: isobutene-isoprene (butyl) rubber. Breakthrough times and swelling properties of the material must be taken into consideration

Wear eye/face protection.

Respiratory protection in case of formation of gases/vapours/mists. Type: ABEK (combined filters against gases and vapours, colour code: Brown/Grey/Yellow/Green). Type: K (against ammonia and organic ammonia derivatives, colour code: Green). In case of intensive or longer exposure: Self-contained breathing apparatus (EN 133).

Chemical resistant protective clothing.

Disposal considerations: see section 13.

The material is stable under normal ambient and anticipated storage and handling conditions of temperature and pressure.

This material is not reactive under normal ambient conditions.

Dangerous/dangerous reactions with Acids.

Heat, Frost.

Oxidisers, Light metals (due to the release of hydrogen in an acid/alkaline medium)

Reasonably anticipated hazardous decomposition products produced as a result of use, storage, spill and heating are not known. Hazardous combustion products: see section 5.

The allocation of waste identity numbers/waste descriptions must be carried out according to the EEC, specific to the industry and process.

This material and its container must be disposed of as hazardous waste.