Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- RPR NON-REACTIVE CONTROL
- Product Code
- GSD01-1600-NC
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
In-vitro component
Uses advised against
No additional information available
Manufacturers & Suppliers
Gold Standard Diagnostics
manufacturer
Davis, CA 95618 U.S.A.
Emergency Contacts
GSD Technical Services
1-888-977-4739
24 hour
OSHA
1-800-321-6742
24 hour
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
The data for this section has not been processed yet.
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Seek medical advice.
Symptoms: Absorption through the lungs can occur causing symptoms similar to those of ingestion.
Take off contaminated clothing. Wash skin with plenty of soap and water. Cover wounds with sterile bandage. Get medical advice if skin irritation persists. If skin irritation or rash occurs: Get medical advice/attention.
Symptoms: May cause slight irritation.
In case of contact with eyes, rinse immediately with plenty of water for 15 minutes and seek medical advice.
Symptoms: May cause eye irritation and redness
Rinse mouth out with water. Drink plenty of water. DO NOT induce vomiting. Call a doctor. Call a poison center or a doctor if you feel unwell.
Symptoms: There may be soreness and redness of the mouth and throat. There may be difficulty swallowing. Nausea and stomach pain may occur. There may be vomiting.
Medical Treatment
Treat symptomatically
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Suitable extinguishing media for the surrounding fire should be used. Use water spray to cool containers.
No information available.
In combustion emits toxic fumes
Firefighter Protection
Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Mark out the contaminated area with signs and prevent access to unauthorized personnel. Turn leaking containers leak-side up to prevent the escape of liquid.
Prevent entry to drains and waterways. Contain spillage using bunding.
Absorb into dry earth or sand. Transfer to a closable, labelled salvage container for disposal by an appropriate method.
Materials: dry earth or sand
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Avoid the formation or spread of mists in the air. Avoid direct contact with the substance.
2-8°C. Keep container tightly closed.
Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure there is sufficient ventilation of the area.
Protective gloves
Safety glasses. Ensure eye bath is readily available
Respiratory protection not required
Wear suitable protective clothing
No special controls
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
The product is non-reactive under normal conditions of use, storage, and transport.
No dangerous reactions known under normal conditions of use. Decomposition may occur on exposure to conditions or materials listed below.
Heat.
Strong oxidizing agents. Strong acids.
In combustion emits toxic fumes
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and Degradability
12.3 Bio-Accumulative potential
12.4 Mobility in Soil
12.5 Results of PBT and vPvB Assessment
The substance does not meet the PBT or vPvB criteria of REACH regulation, annex XIII.
12.7 Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Transfer to a suitable container and arrange for collection by a specialized disposal company.
Comply with local regulations for disposal.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for RPR NON-REACTIVE CONTROL?
The signal word is warning.
What is the physical form of RPR NON-REACTIVE CONTROL?
RPR NON-REACTIVE CONTROL is a liquid with pale yellow color. It has odorless odor.
What is the solubility of RPR NON-REACTIVE CONTROL?
Water: Soluble
What is RPR NON-REACTIVE CONTROL used for?
In-vitro component
What are the hazard statements for RPR NON-REACTIVE CONTROL?
This substance has 1 hazard statement:
- EUH032: Contact with acids liberates very toxic gas.
What is the melting point of RPR NON-REACTIVE CONTROL?
The melting point is No data available and the boiling point is No data available.