Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- L-Arginine Hydrochloride
- Product Code
- BP327-100
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemicals.
Uses advised against
No Information available
Manufacturers & Suppliers
Fisher Scientific UK
national supplier
Bishop Meadow Road, Loughborough, Leicestershire LE11 5RG, United Kingdom
Thermo Fisher Scientific
national supplier
Janssen Pharmaceuticalaan 3a, 2440 Geel, Belgium
Emergency Contacts
Emergency Contact
001-800-227-6701
Emergency Contact
+32 14 57 52 11
Emergency Contact
001-201-796-7100
Emergency Contact
+32 14 57 52 99
CHEMTREC
001-800-424-9300
CHEMTREC
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| L-Arginine HCl EC: 214-275-1 | 1119-34-2 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. If not breathing, give artificial respiration.
Wash off immediately with plenty of water.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes.
Do NOT induce vomiting.
Immediate Medical Attention
Get medical attention if symptoms occur.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, carbon dioxide (CO2), dry chemical, alcohol-resistant foam.
No information available.
Thermal decomposition can lead to release of irritating gases and vapors. Keep product and empty container away from heat and sources of ignition.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment as required. Ensure adequate ventilation. Avoid dust formation. Avoid contact with skin, eyes or clothing.
Avoid release to the environment.
Sweep up and shovel into suitable containers for disposal.
Materials: suitable containers
Related Products
Similar products with comparable safety profiles
L-Arginine
CAS: 74-79-3
L-Lysine hydrochloride
CAS: 657-27-2
L-Lysine monohydrochloride
CAS: 657-27-2
L-Asparagine monohydrate
CAS: 5794-13-8
L-Cysteine hydrochloride hydrate
CAS: 345909-32-2
L-Proline tert-butyl ester hydrochloride
CAS: 5497-76-7
L-Aspartic acid
CAS: 56-84-8
L-Aspartic acid
CAS: 56-84-8
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment/face protection. Ensure adequate ventilation. Avoid dust formation. Avoid contact with skin, eyes or clothing. Avoid ingestion and inhalation.
Keep containers tightly closed in a dry, cool and well-ventilated place.
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Wash hands before breaks and after work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
None under normal use conditions.
Protective gloves. Glove material: Nitrile rubber, Neoprene, Natural rubber, PVC. Breakthrough time: See manufacturers recommendations. EU standard: EN 374 (minimum requirement).
Wear safety glasses with side shields (or goggles) (European standard - EN 166)
No protective equipment is needed under normal use conditions. Large scale/emergency use: Use a NIOSH/MSHA or European Standard EN 136 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced. Recommended Filter type: Particle filter. Small scale/Laboratory use: Maintain adequate ventilation
Wear appropriate protective gloves and clothing to prevent skin exposure. Inspect gloves before use. Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. (Refer to manufacturer/supplier for information) Ensure gloves are suitable for the task: Chemical compatibility, Dexterity, Operational conditions, User susceptibility, e.g. sensitisation effects, also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion. Remove gloves with care avoiding skin contamination.
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
None known, based on information available
Hazardous polymerization does not occur. No information available.
Avoid dust formation. Incompatible products. Excess heat.
Strong oxidizing agents.
Nitrogen oxides (NOx). Carbon monoxide (CO). Carbon dioxide (CO2).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Contains no substances known to be hazardous to the environment or that are not degradable in waste water treatment plants.
12.2. Persistence and degradability
The substance is expected to be biodegradable.
12.3. Bioaccumulative potential
12.4. Mobility in soil
No information available
12.5. Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
12.6. Endocrine disrupting properties
This product does not contain any known or suspected endocrine disruptors.
12.7. Other adverse effects
The product does not contain any known or suspected substances related to Persistent Organic Pollutants or Ozone Depletion Potential.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Consult local, regional, and national hazardous waste regulations to ensure complete and accurate classification.
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Take note of Directive 98/24/EC on the protection of the health and safety of workers from the risks related to chemical agents at work.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for L-Arginine Hydrochloride?
The signal word is no signal word.
What is the physical form of L-Arginine Hydrochloride?
L-Arginine Hydrochloride is a solid appearing as white . It has odorless odor.
What is L-Arginine Hydrochloride used for?
Laboratory chemicals.
What is the melting point of L-Arginine Hydrochloride?
The melting point is 226 - 230 °C and the boiling point is 235 °C / 455 °F.