Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Acetic acid, ammonium salt
- Product Code
- 218360000, 218360010, 218365000, 218360050
- Chemical Name
- Acetic acid, ammonium salt
- Synonyms
- Ammonium acetate
Regulatory Identifiers
- CAS Number
- 631-61-8 Check regulations →
- EC Number
- 211-162-9 Check regulations →
Identified Uses
Laboratory chemicals.
Uses advised against
No Information available
Manufacturers & Suppliers
Fisher Scientific UK
distributor
Bishop Meadow Road, Loughborough, Leicestershire LE11 5RG, United Kingdom
Thermo Fisher Scientific
distributor
Janssen Pharmaceuticalaan 3a, 2440 Geel, Belgium
Emergency Contacts
Emergency Contact
001-800-227-6701
Emergency Contact
+32 14 57 52 11
Emergency Contact
001-201-796-7100
Emergency Contact
+32 14 57 52 99
CHEMTREC
001-800-424-9300
CHEMTREC
001-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ammonium acetate EC: 211-162-9 | 631-61-8 | 100% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air. Get medical attention immediately if symptoms occur.
Wash off immediately with plenty of water for at least 15 minutes. Get medical attention immediately if symptoms occur.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Get medical attention.
Clean mouth with water and drink afterwards plenty of water. Get medical attention if symptoms occur.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray, carbon dioxide (CO2), dry chemical, alcohol-resistant foam.
No information available.
Thermal decomposition can lead to release of irritating gases and vapors.
Firefighter Protection
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or equivalent) and full protective gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Should not be released into the environment.
Sweep up and shovel into suitable containers for disposal.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment/face protection. Ensure adequate ventilation. Avoid contact with skin, eyes or clothing. Avoid ingestion and inhalation. Avoid dust formation.
Keep containers tightly closed in a dry, cool and well-ventilated place.
Handle in accordance with good industrial hygiene and safety practice. Keep away from food, drink and animal feeding stuffs. Do not eat, drink or smoke when using this product. Remove and wash contaminated clothing and gloves, including the inside, before re-use. Wash hands before breaks and after work.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
None under normal use conditions.
Protective gloves. Gloves material: Natural rubber, Nitrile rubber, Neoprene, PVC, Butyl rubber. Breakthrough time: See manufacturers recommendations. EU standard: EN 374 (minimum requirement).
Wear safety glasses with side shields (or goggles) (European standard - EN 166)
No protective equipment is needed under normal use conditions. Large scale/emergency use: If exposure limits are exceeded or irritation is experienced, ventilation and evacuation may be required. Recommended Filter type: Particle filter.
Long sleeved clothing.
No information available.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Hygroscopic.
None known, based on information available
None under normal processing. Hazardous polymerization does not occur.
Incompatible products. Excess heat. Avoid dust formation. Exposure to moisture.
Strong oxidizing agents. Strong acids. Strong bases. sodium hypochlorite.
Nitrogen oxides (NOx). Ammonia.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Contains no substances known to be hazardous to the environment or that are not degradable in waste water treatment plants.
12.1. Toxicity
12.2. Persistence and degradability
The substance is readily biodegradable, persistence is unlikely, and degradability is not relevant for inorganic substances.
12.3. Bioaccumulative potential
Bioaccumulation is unlikely.
12.3. Bioaccumulative potential
12.4. Mobility in soil
The product is water soluble and highly mobile in soil, with the potential to spread in water systems.
12.5. Results of PBT and vPvB assessment
12.6. Endocrine disrupting properties
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste. Consult local, regional, and national hazardous waste regulations to ensure complete and accurate classification.
Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Ammonium acetate (631-61-8) is listed in various international inventories. REACH authorization/restrictions and Seveso III directive are not applicable.
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is Acetic acid, ammonium salt known by?
Acetic acid, ammonium salt is also known as: Ammonium acetate
What is the hazard signal word for Acetic acid, ammonium salt?
The signal word is no signal word.
What is the physical form of Acetic acid, ammonium salt?
Acetic acid, ammonium salt is a solid appearing as white . It has ammonia-like odor.
What is Acetic acid, ammonium salt used for?
Laboratory chemicals.
What is the melting point of Acetic acid, ammonium salt?
The melting point is 114 °C / 237.2 °F and the boiling point is No information available.