Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- acetic acid
- Product Code
- 0107
- Chemical Name
- acetic acid, of a concentration of more than 10 per cent, by weight, of acetic acid
- Synonyms
- Acetic acid, Acetic acid, of a concentration of more than 10 percent, by weight, of acetic acid, Eastman Glacial Acetic Acid, Ethanoic acid, Ethylic acid, Glacial acetic acid, Methanecarboxylic acid
Regulatory Identifiers
- CAS Number
- 64-19-7 Check regulations →
- EC Number
- 200-580-7 Check regulations →
- REACH No.
- 01-2119475328-30-XXXX
Identified Uses
Chemical for research, development, manufacturing, laboratory chemical for analysis.
Manufacturers & Suppliers
Biosolve Chimie
manufacturer
20 Rue Roger Husson, 57260 Dieuze, France
+33 3 878 675 80/81/82/83/84/85
Biosolve B.V.
distributor
Kerkhofstraat 21, 5554HG Valkenswaard, the Netherlands.
+31-(0)40-2071300
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| acetic acid EC: 200-580-7 | 64-19-7 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
In case of unconsciousness place patient stably in side position for transportation.
Immediately wash with water and soap and rinse thoroughly.
Rinse opened eye for several minutes under running water. Then consult a doctor.
Drink plenty of water and provide fresh air. Call for a doctor immediately.
Immediate Medical Attention
Call for a doctor immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Firefighter Protection
Protective equipment: No special measures required.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Wear protective equipment. Keep unprotected persons away.
Dilute with plenty of water.
Absorb with liquid-binding material
Materials: sand, diatomite, acid binders, universal binders, sawdust
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
No special precautions are necessary if used correctly.
Keep container tightly sealed.
Keep ignition sources away - Do not smoke.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
No further data; see section 7.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture. Protective gloves. The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Material of gloves: The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. Penetration time of glove material: The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
Tightly sealed goggles
Not required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1 Toxicity
12.2 Persistence and degradability
No further relevant information available.
12.3 Bioaccumulative potential
No further relevant information available.
12.4 Mobility in soil
12.5 Results of PBT and vPvB assessment
The substance is not considered to be PBT or vPvB.
12.6 Endocrine disrupting properties
The product does not contain substances with endocrine disrupting properties.
12.7 Other adverse effects
The product is classified as slightly hazardous for water (Water hazard class 1). Precautions must be taken to prevent undiluted product from reaching water systems or sewage.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Must not be disposed together with household garbage. Do not allow product to reach sewage system.
Must not be disposed together with household garbage.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN2789
- Shipping Name
- ACETIC ACID, GLACIAL
- Transport Class
- 8
- Packing Group
- II
Warning: Corrosive substances.
Warning: Corrosive substances.
Warning: Corrosive substances.
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What other names is acetic acid known by?
acetic acid is also known as: Acetic acid, Acetic acid, of a concentration of more than 10 percent, by weight, of acetic acid, Eastman Glacial Acetic Acid, Ethanoic acid, Ethylic acid, Glacial acetic acid, Methanecarboxylic acid
What is the hazard signal word for acetic acid?
The signal word is danger.
What is the physical form of acetic acid?
acetic acid is a liquid appearing as fluid with colourless color. It has pungent odor.
What is acetic acid used for?
Chemical for research, development, manufacturing, laboratory chemical for analysis.
What are the hazard statements for acetic acid?
This substance has 3 hazard statements:
- H226: Flammable liquid and vapour.
- H312: Harmful in contact with skin.
- H314: Causes severe skin burns and eye damage.
What is the melting point of acetic acid?
The melting point is 16.6 °C and the boiling point is 118 °C.