Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- D³ IFA Enterovirus Identification Kit
- Product Code
- 01-050000, 01-050001, 01-055005, 01-056005, 01-00081, 01-090025, 01-002007b
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Diagnostic HYBRIDS, Inc.
manufacturer
1055 East State Street, Suite 100 Athens, OH 45701, USA
(740) 589-3300 or (866) 344-3477
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
GHS06
Hazard Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium azide EC: 247-852-1 | --- | 0.1% | Yes |
| Evans Blue EC: 206-242-5 | --- | 0.007% | Yes |
| Fluorescein Isothiocyanate (FITC) EC: 222-042-0 | --- | --- | Yes |
| Bovine and murine proteins | --- | --- | No |
| Sodium azide EC: 247-852-1 | --- | 4% | Yes |
| NaCl EC: 231-598-3 | --- | 36% | Yes |
| Glycerol EC: 200-289-5 | --- | 60% | Yes |
| Tris(hydroxymethyl)aminomethane EC: 201-064-4 | --- | 250% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air
Rinse with plenty of water. Remove clothing before washing.
Flush eyes immediately with water for 15 minutes, occasionally lifting the upper and lower eyelids
Immediate Medical Attention
Consult a doctor/medical service if irritation persists (eye/skin), if breathing problems develop (inhalation), or if you feel unwell (ingestion).
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
All non combustible extinguishing media allowed
No data available
Aqueous solutions of sodium azide, when mixed with acids, may liberate a toxic gas (hydrazoic acid). Sodium azide may react with lead and copper plumbing to form highly explosive metal azides.
Take account of toxic fire fighting water. Use fire fighting water moderately and contain it
Firefighter Protection
Heat/fire exposure: compressed air/oxygen apparatus. Heat/fire exposure: gas-tight suit
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Prevent soil and water pollution. Discharge according to local regulations.
Take up liquid spill into absorbent material, Clean contaminated surfaces with an excess of water
Materials: absorbent material, water
Related Products
Similar products with comparable safety profiles
D³ IFA Enterovirus Identification Kit
---
D³® DFA Varicella-zoster Virus Identification Kit
---
D³® DFA Cytomegalovirus Immediate Early Antigen ID Kit
---
D³ Ultra™ DFA Respiratory Virus Screening & ID Kit
---
D³® Ultra DFA "Family" Screening and ID Kits
---
MicroVue™ Factor I EIA Kit
---
RIDA®QUICK Norovirus LF Reagent A
---
RIDA®QUICK Norovirus LF Reagent B
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Product should be handled using Good Laboratory Practices. Handle and open the container with care.
2° to 8°C; store in the dark
Observe strict hygiene standards. Remove and clean contaminated clothing.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Area ventilation is generally adequate
Gloves. Suitable materials: Butyl rubber, natural rubber, neoprene, nitrile rubber, polyethylene, PVC
Safety glasses or Face shield
Insufficient ventilation: wear respiratory protection
Corrosion proof clothing, Protective clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
All components are stable until expiry date if stored in specified conditions (see label)
Keep away from metals and acids (Azide containing components)
metals and acids (Azide containing components)
No hazardous decomposition products are formed in high quantities
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
Aquatic toxicity
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Flush drains thoroughly with water after disposing of solutions containing sodium azide. To remove contamination from old drains suspected of azide accumulation, use 10% sodium hydroxide solution.
All the kit components must be considered as hazardous waste. They should be disposed of following local regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Classification according to directives 67/548/EEC and 1999/45/EC
40X PBS Concentrate (4% Sodium azide) and MAb Reagents, DFA Reagents and Mounting Fluid (0.1% Sodium azide) classified under 67/548/EEC and 1999/45/EC.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for D³ IFA Enterovirus Identification Kit?
The signal word is danger.
What is the physical form of D³ IFA Enterovirus Identification Kit?
D³ IFA Enterovirus Identification Kit is a liquid and solid appearing as mab reagent: a clear solution; dfa conjugate: clear blue solutions; 40x pbs concentrate: a clear solution; mounting fluid: a clear colorless, slightly viscous, solution; antigen control slide: glass microscope slides, coated with a brown pigment except for five clear areas . It has odorless odor.
What are the hazard statements for D³ IFA Enterovirus Identification Kit?
This substance has 3 hazard statements:
- H301: Solution Toxic if swallowed
- H335: Irritating to eyes, respiratory system and skin
- H412: Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment