Aerospray® TB, Mycohold™ Cell Adhesive Concentrate

Remove person to fresh air and keep comfortable for breathing. Allow affected person to breathe fresh air. Allow the victim to rest.

Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. Immediately call a POISON CENTER/doctor. Specific measures (see supplemental first aid instruction on this label). Wash with plenty of water/... Wash contaminated clothing before reuse. Wash skin with plenty of water. Take off contaminated clothing.

Symptoms: Repeated exposure to this material can result in absorption through skin causing significant health hazard.

Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists. Rinse eyes with water as a precaution.

Symptoms: pain, blinking or redness

Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention. Call a poison center or a doctor if you feel unwell.

Foam. Dry powder. Carbon dioxide. Water spray. Sand.

Do not use a heavy water stream.

Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.

Ventilate spillage area. Evacuate unnecessary personnel. Avoid contact with skin, eyes and clothing. For emergency responders: Ventilate area.

Prevent entry to sewers and public waters. Avoid release to the environment.

Take up liquid spill into absorbent material. Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials.

Materials: inert solids, such as clay or diatomaceous earth

Ensure good ventilation of the work station. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. Do not get in eyes, on skin, or on clothing. Wear personal protective equipment.

Keep only in the original container in a cool, well ventilated place away from : Keep container closed when not in use. Store in a well-ventilated place. Keep cool.

Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.

Ensure good ventilation of the work station.

Wear protective gloves. Suitable gloves should be tested to EN 374. The glove material has to be impermeable and resistant to the product/the substance/the preparation. As the product is a preparation of several substances, the resistance and penetration time/breakthrough time of the glove material cannot be calculated/observed in advance and, therefore, has to be checked prior to the application. The following are recommended: materials - natural latex or nitrile; thickness - 4 to 6 mils (0.1 mm - 0.15 mm); minimum breakthrough time - 60 minutes.

Chemical goggles or safety glasses. Safety glasses

Wear appropriate mask

Wear suitable protective clothing

Avoid release to the environment.

Not established.

The product is non-reactive under normal conditions of use, storage and transport.

Not established.

Direct sunlight. Extremely high or low temperatures.

Strong acids. Strong bases.

fume. Carbon monoxide. Carbon dioxide.

Dispose of contents/container in accordance with licensed collector's sorting instructions.

Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.