Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Aerospray® TB Reagent C, Auramine O
- Product Form
- Mixture
- Product Code
- SS-061CA, SS-061CA-EU
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Laboratory chemical
Uses advised against
No additional information available
Manufacturers & Suppliers
ELITechGroup Inc.
manufacturer
370 West 1700 South, US– 84321 Logan, UT – Cache, USA
+1 (435) 752-6011
http://www.elitechgroup.com
Emergency Contacts
InfoTrac Emergency Response
1-800-535-5053
InfoTrac Emergency Response
+1 352-323-3500
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS05
GHS08
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor.
Take off immediately all contaminated clothing. Rinse skin with water/shower. Immediately call a POISON CENTER/doctor. Call a physician immediately.
Symptoms: Burns.
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor. Call a physician immediately.
Symptoms: Serious damage to eyes.
Rinse mouth. Do NOT induce vomiting. Immediately call a POISON CENTER/doctor. Call a physician immediately.
Symptoms: Burns.
Immediate Medical Attention
Immediately call a POISON CENTER/doctor. Call a physician immediately.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
ABC powder. Alcohol-resistant foam. BC powder. Water spray. Dry powder. Foam. Carbon dioxide.
Do not use a heavy water stream.
Flammable liquid and vapour. May form flammable/explosive vapour-air mixture.
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire fighting water from entering the environment.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection. Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ventilate spillage area. Evacuate unnecessary personnel. No open flames, no sparks, and no smoking. Do not breathe dust/fume/gas/mist/vapours/spray. Avoid contact with skin and eyes.
Avoid release to the environment.
Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage.
Materials: inert solids, such as clay or diatomaceous earth
Related Products
Similar products with comparable safety profiles
Aerospray® TB Reagent A, Fluorescence Decolorizer
---
Aerospray® TB Reagent A, Fluorescence Decolorizer Concentrate
---
Aerospray® TB Reagent A, Fluorescence Decolorizer Concentrate
---
Aerospray® TB Reagent A, Carbol Fuchsin Decolorizer
---
Aerospray® Hematology Pro Reagent B, Thiazin Stain
---
Aerospray® Gram Reagent C, Crystal Violet
---
Aerospray® Hematology Stat Reagent C, Eosin Stain Concentrate
---
Aerospray® TB, Mycohold™ Cell Adhesive Concentrate
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Ensure good ventilation of the work station. Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour. No open flames. No smoking. Take precautionary measures against static discharge. Use only non-sparking tools. Do not breathe dust/fume/gas/mist/vapours/spray. Obtain special instructions before use. Use personal protective equipment as required. Do not handle until all safety precautions have been read and understood. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Flammable vapours may accumulate in the container. Use explosion-proof equipment. Wear personal protective equipment. Avoid contact with skin and eyes.
Keep away from ignition sources. Store in a well-ventilated place. Keep cool. Keep container tightly closed. Store locked up.
Wash hands thoroughly after handling. Wash contaminated clothing before reuse. Do not eat, drink or smoke when using this product. Always wash hands after handling the product.
No open flames. No smoking. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Ensure good ventilation of the work station.
Wear protective gloves. Suitable gloves should be tested to EN 374. The glove material has to be impermeable and resistant to the product/the substance/the preparation. As the product is a preparation of several substances, the resistance and penetration time/breakthrough time of the glove material cannot be calculated/observed in advance and, therefore, has to be checked prior to the application. The following are recommended: materials - natural latex or nitrile; thickness - 4 to 6 mils (0.1 mm - 0.15 mm); minimum breakthrough time - 60 minutes.
Chemical goggles or face shield. Safety glasses
Wear appropriate mask. [In case of inadequate ventilation] wear respiratory protection.
Wear suitable protective clothing
Avoid release to the environment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Flammable liquid and vapour. May form flammable/explosive vapour-air mixture.
Corrosive vapours. Flammable liquid and vapour.
Not established.
Direct sunlight. Extremely high or low temperatures. Open flame. Overheating. Heat. Sparks. Avoid contact with hot surfaces. No flames, no sparks. Eliminate all sources of ignition.
Strong acids. Strong bases.
fume. Carbon monoxide. Carbon dioxide. May release flammable gases. Thermal decomposition generates : Corrosive vapours.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
12.1. Toxicity
Harmful to aquatic life with long lasting effects.
12.1. Toxicity
12.1. Toxicity
12.2. Persistence and degradability
May cause long-term adverse effects in the environment.
12.2. Persistence and degradability
12.2. Persistence and degradability
The substance is biodegradable in soil and readily biodegradable in water under both aerobic and anaerobic conditions. It inhibits biodegradation processes in soil.
12.3. Bioaccumulative potential
Not established.
12.3. Bioaccumulative potential
Not bioaccumulative. Not established.
12.3. Bioaccumulative potential
Low potential for bioaccumulation (BCF < 500).
12.3. Bioaccumulative potential
No test data of component(s) available.
12.4. Mobility in soil
12.5. Results of PBT and vPvB assessment
12.6. Endocrine disrupting properties
12.7. Other adverse effects
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Dispose of contents/container in accordance with licensed collector's sorting instructions.
Dispose in a safe manner in accordance with local/national regulations. Dispose of contents/container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1170
- Shipping Name
- ETHANOL SOLUTION (ETHYL ALCOHOL SOLUTION)
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety, health and environmental regulations/legislation specific for the substance or mixture
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Aerospray® TB Reagent C, Auramine O?
The signal word is danger.
What is the physical form of Aerospray® TB Reagent C, Auramine O?
Aerospray® TB Reagent C, Auramine O is a liquid with yellow color. It has characteristic odor.
What is the solubility of Aerospray® TB Reagent C, Auramine O?
Water: No data available
What is Aerospray® TB Reagent C, Auramine O used for?
Laboratory chemical
What are the hazard statements for Aerospray® TB Reagent C, Auramine O?
This substance has 5 hazard statements:
- H226: Flammable liquid and vapour.
- H314: Causes severe skin burns and eye damage.
- H341: Suspected of causing genetic defects (if swallowed, if inhaled).
- H373: May cause damage to organs through prolonged or repeated exposure.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Aerospray® TB Reagent C, Auramine O?
The melting point is Not applicable and the boiling point is Not available.